Unilateral bite elevation with a zirconia bridge and a lithium disilicate onlay

Clinical case by Dr. Florian Zwiener

The 85-year-old female patient presented after osteosynthesis of a multiple mandibular fracture she had sustained after a fall. During fixation, a massive nonocclusion had occurred in the left posterior region of the mandible (teeth 34 to 37; FDI notation). The patient desired to be able to chew properly again in this area. After endodontic treatment of the two avulsed central incisors, which had been replanted in the hospital, and periodontal therapy, a bite elevation was planned on the left side.

The idea was to restore the teeth and elevate the bite with three onlays and a crown made of lithium disilicate (IPS e.max CAD, Ivoclar Vivadent). During tooth preparation, however, a longitudinal root fracture was detected on the first molar. Therefore, only the first premolar was restored in this session. For this purpose, an onlay was produced chairside (with the CEREC system, Dentsply Sirona) and adhesively luted with PANAVIA™ V5 (Kuraray Noritake Dental Inc.). The first molar was extracted. One week later, the extraction socket, which was still healing, was modelled for the ovoid pontic using an electrotome loop. The second premolar and molar were prepared as abutment teeth for a bridge. The bridge was then milled from KATANA™ Zirconia Block for Bridge in the shade A3.5 and individualized with CERABIEN™ ZR FC Paste Stain (both Kuraray Noritake Dental inc.). After another week, the bridge was luted with the self-adhesive resin cement PANAVIA™ SA Cement Universal (Kuraray Noritake Dental Inc.) following sandblasting.

Fig. 1. Situation after multiple mandibular fracture on the left side.

Fig. 2. Clinical situation at the initial appointment in the dental practice.

Fig. 3. Open bite in the mandibular left posterior region.

Fig. 4. Bridge design …

Fig. 5. … using the CEREC Software.

Fig. 6. Due to the bright shade of the teeth in the cusp area, the restoration was positioned high in the KATANA™ Zirconia Multi-Layered Block.

Fig. 7. Surface texturing in the pre-sintered state (prior to the final sintering procedure).

Fig. 8. Bridge after a seven-hour sintering cycle.

Fig. 9. Appearance of the bridge after individualization with CERABIEN™ ZR FC Paste Stain …

Fig. 10. … and two glaze firings.

Fig. 11. Clinical situation after restoring the teeth with a lithium disilicate onlay and a zirconia bridge.

FINAL SITUATION

Fig. 12. Onlay and bridge in place (after adhesive luting with PANAVIA™ V5 and self-adhesive luting with PANAVIA™ SA Cement Universal).

Fig. 13. Final X-ray used to check for excess cement around the bridge.

Dentist:

DR. FLORIAN ZWIENER

Dr. Florian Zwiener is a distinguished dental professional known for his expertise in Endodontics, Prosthodontics, and CAD/CAM technology. Born in Cologne, Germany, he developed a passion for dentistry and pursued his education at the University of Cologne, where he obtained his degree in Dentistry. Currently, Dr. Florian Zwiener practices at the Dr. Frank Döring Dental Clinic in Hilden, Germany. Here, he continues to apply his specialized knowledge and skills, ensuring that his patients receive the highest quality of care. Follow Dr. Zwiener on Instagram: @dr.florian_zwiener.