A new smile with only 4 zirconia crowns

Case by Kanstantsin Vyshamirski

A male patient (47 years of age) presented to his dentist with severe damage to his teeth. His main request was to increase aesthetics, to achieve a more pleasing envisaged aesthetic area. A side request was to achieve a ‘whitening but natural look’. This was achieved by using a lighter colour palette of zirconia and porcelain materials.

The final result was achieved through the creation of a wax-up, followed by a mock-up, provisional restoration and finally adhesive bonding of the zirconia crowns.

INITIAL SITUATION

Fig. 1. Initial situation. Male patient (47 years of age).

Fig. 2. Planning the new smile according to patient’s aesthetic and functional parameters.

Fig. 3. Mock-up in place to check the new look in the patient’s mouth.

Fig. 4. KATANA™ Zirconia YML shade A1 crowns with labial cutback after milling.

Fig. 5. Crowns after sintering on the plaster model.

Fig. 6. Noritake CERABIEN™ ZR porcelain layering map.

Fig. 7. Finishing the labial surface using both polishing and selfglaze. On the palatal side of the crowns only CERABIEN™ FC Paste Stain stains and glaze were used for finishing. To aid in optimisation of the soft tissue condition the palato-cervical and near proximal areas were polished.

Fig. 8. Finished crowns on the plaster model.

Fig. 9. Try-in using PANAVIA™ V5 White try-in paste, to confirm the proper appearance. For the final adhesive cementation PANAVIA™ V5 White has been used.

FINAL SITUATION

Fig. 10. Situation after seven months. The result is aesthetically pleasing and the gingival condition excellent.

Fig. 11. Recall after 1.5 years.

Dentist:

KANSTANTSIN VYSHAMIRSKI

Kanstantsin started his dental technician career in 2014. His speciality is aesthetic prosthetic porcelain works. Kanstantsin is an experienced user of KATANA™ Zirconia and Noritake porcelains. He owns his lab in Riga, Latvia.