News Feature

Repair of porcelain chippings

Article by Peter Schouten.

I am frequently asked questions about the intraoral repair of porcelain chippings. To achieve success in repairs, it is essential to consider several important issues.

Perhaps the single most crucial issue to recognise is why the chipping occurred in the first place. For example, if loading stress is the leading cause, this should be considered during the repair.

Other issues to consider are removal of contamination, optimal roughening and chemical activation of the surface, and the prevention of contamination during the repair. Also, a rubber dam should be used to isolate the working field.

FUNDAMENTALS OF ADHESION

Adhesive procedures can be only successful by using the proper substances and methods. Different kinds of surfaces often need different treatments for success. However, the three basic fundamentals of adhesion must be respected to achieve the best results.

1) Mechanical retention through a roughened surface.

2) Chemical activation through chemically active substances.

3) High energetic bonding surface allowing for optimal interaction (wetting capacity) between the surface and the applied medium. Contamination will lower the bonding capacities and must be avoided or removed in any case.

TYPES OF FRACTURE

The most frequent fractures are porcelain only and those that include exposure of the substructure in PFZ or PFM prosthesis.

Many cases present with only limited chipping to the porcelain, for example, at the incisal edge. To achieve a durable repair in this instance, start by increasing the bonding/repair area using a fine diamond burr to create a large bevel. A fine grit burr is preferable over a medium or coarse version because a higher number of shallow grooves deliver a more optimal bonding surface than lesser deeper ones do. Additional roughening of the adherent surface by sandblasting with alumina (50 µm grain size, 2 bar pressure) is highly recommended to increase the surface area further.

When repairing porcelain chippings where the substructure is exposed, it is essential to be aware that multiple substrates are dealt with, indicating a need to adjust the repair protocol accordingly.

Clean the roughened fractured surface thoroughly. KATANA™ Cleaner is the product of choice. It is a safe and easy to use product with high cleaning power. It can be used both intra and extra orally on all kinds of dental substrates. After rinsing and thorough drying, the surface is ready for the next step, chemical activation.

CLEARFIL™ CERAMIC PRIMER PLUS contains both silane and MDP and effectively treats both silica-containing ceramics and metal oxides (zirconia) and metals. After application and thorough drying, the composite restoration can be carried out immediately without an extra bonding step. The composite of choice is a durable flowable, CLEARFIL MAJESTY™ ES Flow. It has high flexural strength, even higher than most paste-type composites. Besides that, it adapts to the surface better and easier. Quick and easy polishing and gloss retention are other highly valuated qualities of CLEARFIL MAJESTY™ ES Flow.

HINTS AND TIPS

Isolate the working field by using rubber dam
Bevel the chipping extensively using a fine diamond burr
Roughen the adherent surface, preferably by sandblasting
Clean the bonding area with KATANA™ Cleaner
Apply CLEARFIL™ CERAMIC PRIMER PLUS to the entire bonding area (including exposed zirconia or metal) and dry thoroughly
Cover exposed metal with a thin layer of CLEARFIL™ ST OPAQUER and light cure
Repair with a strong flowable composite, such as CLEARFIL MAJESTY™ ES Flow

REPAIR OF PORCELAIN CHIPPINGS VIDEO