429 Too Many Requests

429 Too Many Requests

nginx

Identification

Je certifie être un professionnel de la santé bucco-dentaire et être autorisé à accéder à cet espace.

Kuraray logo
Noritake logo
Menu
Cerca
My Cart
Cerca
Fermer

IDS 2025 CONFÉRENCIERS

  • Home
  • IDS 2025 CONFÉRENCIERS

4 jours, 14 conférenciers, 2 stages :
Conférences et démonstrations en live

 

Des informations de première main sur le comportement d'un matériau spécifique dans l'environnement du cabinet dentaire ou du laboratoire, des conseils utiles sur la manière d'appliquer un produit de la meilleure façon possible ou simplement une réponse à une question : tout cela est fourni par des prothésistes et praticiens renommés qui donnent des conférences et font des démonstrations sur le stand Kuraray Noritake Dental. Ils sont impatients de partager leurs connaissances approfondies et leur expérience - cette fois-ci simultanément sur deux scènes : l'une consacrée aux cabinets dentaires et l'autre aux sujets dédiés aux laboratoires !

 

  • Conférenciers cabinets dentaires

     

  • Afbeelding Dr. Enzo Attanasio
  • Dr. Enzo Attanasio

    Enzo Attanasio graduated in 2008 in Dentistry and Dental Prosthetics from the Magna Graecia University of Catanzaro. In 2009, he went on to specialize in the Use of Laser and new technologies in the treatment of oral and perioral tissues at the University of Florence. That year he also attended Prof. Arnaldo Castellucci’s course in Clinical Endodontics at the Teaching Center of Microendodontics in Florence where, in 2012, he went on to complete his training in Surgical Microendodontics. In 2017 he attended a course on Direct and indirect Adhesive Restorations at Prof. Riccardo Becciani’s Think Adhesive training center in Florence where he later become a tutor. Today, as a member of the Italian AIC and based in Lamezia Terme, Italy, Dr. Attanasio has a special interest in Endodontics and Aesthetic Conservative.
     
    Thursday, March 27th 13:30 - 14:30
     
    With the introduction of new nanofilled composites, with a high percentage of filler and low viscosity, over the last 10 years, we have witnessed the introduction and development of extremely simplified reconstruction techniques. The Flow Injection Technique represents one of the simplest and most versatile molding techniques that can be used in the daily life of your clinic. The possibility of replicating, precisely and quickly, the anatomical shapes of anterior and posterior elements, produced by a technician in the laboratory - but not only -, represents a solution that no dentist should give up.
     
    Friday, March 28th 13:30 - 14:30
     
    Discover BEST.FIT, the revolutionary technique for predictable, natural-looking anterior restorations! In this lecture, we’ll explore how BEST.FIT (Buccal Enamel Shape Through Flow Injection Technique) achieves impeccable, long-lasting results by combining the precision of the flowable injection technique with the simplicity of direct methodologies. You’ll learn how to easily reproduce complex morphological details, reducing chair time and optimizing your clinical workflow. Whether you're an experienced dentist or just starting your career, BEST.FIT will equip you with new tools to elevate the quality of your aesthetic restorations. Don’t miss the chance to revolutionize your practice!
     
    Friday, March 28th 16:30 - 17:30
     
    This lecture will guide you through the most reliable adhesive techniques for every prosthetic and dental substrate, providing step-by-step protocols for consistently outstanding results. Curated by the Think Adhesive group, these recipes integrate best practices with the latest advancements from Kuraray Noritake, a leader in high-performance adhesion. Learn how their innovative products can elevate your clinical outcomes, ensuring durable, precise restorations. Whether you’re honing your expertise or staying ahead in adhesive dentistry, this session is packed with insights to take your practice to the next level!

     

  • Dr. Alessandro Devigus

    Dr. Alessandro Devigus received his degree from Zurich University, Switzerland, in 1987. Since 1990 he's working in his own private practice with a focus on CAD CAM and Digital Dentistry. He is also CEREC Instructor at the Zurich Dental School. Dr. Alessandro Devigus is an active member of the European Academy of Esthetic Dentistry (EAED), founder of the Swiss Society of Computerized Dentistry, Neue Gruppe member, ITI fellow and speaker. Dr. Devigus is editor-in-chief of the International Journal of Esthetic Dentistry, author of various publications and an international lecturer.
     
    Friday, March 28th 12:30 - 13:30
     
    Adhesive cementation plays a decisive role in the long-term stability and esthetics of restorations. But which materials and techniques are best suited? This presentation explains the most important steps of adhesive cementation and the key aspects for successful application in the dental practice.
     
    Friday, March 28th 15:30 - 16:30
     
    Not all zirconium oxide is the same! Its properties and applications vary depending on composition and processing. High-translucency and opaque variants allow for precise adaptation to aesthetic and functional needs. Modern CAD/CAM systems enable efficient processing, reducing treatment time. For long-lasting restorations, proper surface conditioning and precise handling are essential. Careful planning, close collaboration with dental technicians, and advanced technologies ensure excellent results.
     
    Saturday, March 29th 12:30 - 13:30 (DE)
     
    Die adhäsive Befestigung spielt eine entscheidende Rolle für die Langzeitstabilität und Ästhetik von Restaurationen. Doch welche Materialien und Techniken sind am besten geeignet? In dieser Präsentation werden die wichtigsten Schritte der adhäsiven Befestigung und die entscheidenden Aspekte für eine erfolgreiche Anwendung in der Praxis erläutert.

     

  • Afbeelding Dr. Alessandro Devigus
  • Afbeelding Dr. Gertrud Fabel
  • Dr. Gertrud Fabel

    Since 1998 Private practice in Munich, Germany www.zahnarzt-cosimapark.de
    2019 privat digital practice
    Speaker on main topics: digital dentistry, metalfree prosthetics, esthetics, function, Women empowerment
    2015 MSc Clinical Dental CAD/CAM
    Numerous national and international trainings and lectures
    Numerous national and international publications
    Collaboration with Universities Munich and Greifswald for research and publications
    Since 2021 “CEREC-Curriculum” (Quintessenz, Berlin)
    Memberships: DGZMK, DGCZ, Dentista, Leading Ladies in Dentistry
     
    Friday, March 28th 14:30 - 15:30
     
    SingleVisit with the CEREC system is not only convenient for classic prosthetic patients but also brings great advantages in the treatment of particularly vulnerable groups. The range of materials offers solutions for the treatment of geriatric patients as well as children with agenesis or MIH. Modern composite blocks (Avencia) and highly translucent multilayer materials like KATANA STML allow maximum flexibility in treatment, fabrication and time management.
     
    Saturday, March 29th 11:30 - 12:30 (DE)
     
    SingleVisit mit dem CEREC System ist nicht nur für die klassischen Prothetik-Patienten ein Komfort, sondern bietet auch in der Behandlung besonders vulnerabler Gruppen große Vorteile. Das Materialspektrum gibt Lösungsmöglichkeiten in der Behandlung geriatrischer Patienten aber auch von Kindern mit Nichtanlagen oder MIH. Moderne Composite-Blöcke (Avencia) und hoch transluzente Multilayer-Materialien wie KATANA STML  erlauben dabei maximale Flexibilität in Behandlung, Herstellung und Zeitmanagement.
     
    Saturday, March 29th 13:30 - 14:30 (DE)
     
    Mit dem richtigen Equipment an Scanner und Schleifmaschine und einem passenden Zirkonoxid wurden Behandlungen effizient. Nach dem Prophylaxe Termin werden Patienten entspannt und frisch gereinigt gescannt (Statusscan). Die Farbe kann bestimmt werden. Zum Präparationstermin ist dann bereits die Primemill vorbereitet, die richtigen Schleifer eingespannt, der Block abgetastet. Katana STML bildet in der Versorgung von superfast bis extrafein gefräst von rascher Versorgung bis Highend Ästhetik eine breite Range von Versorgungen.

     

  • Dr. Ludivine Facon

    Dr. Ludivine Facon graduated from the University of Lille, where she developed a solid foundation in dentistry. Passionate about periodontology and dental aesthetics, Dr. Facon pursued specialized training to refine her skills in these fields. In 2007, she completed clinical periodontology training at the Charon Clinic, followed by individual dental prophylaxis training with Michel Blique in 2008. From 2013 to 2014, she attended the long cycle program at the Académie du Sourire in Aix-en-Provence, enhancing her expertise in dental aesthetics. Dr. Facon continued to build on her knowledge with international training, including at the International Institute of Periodontology in Montreal in 2015, and a veneer training course at the GAD Center in Bordeaux the same year. In 2016, she further advanced in mucogingival surgery at the Académie de Parodontologie in Aix-en-Provence. Always keeping up with the latest developments, she participated in the CIDAE training in Brussels in 2022. More recently, in 2024, Dr. Facon completed a course in composite layering and injection, led by Guillaume Piskorski, the French specialist in injected composite technique, in Lille. With extensive expertise, Dr. Facon is also an educator in direct aesthetic composites, having taught at the University of Lille in 2020, 2022, 2023, and 2024.
     
    Wednesday, March 26th 14:30 - 15:30
    Part 1
     
    Wednesday, March 26th 16:30 - 17:30
    Part 2
     
    Thursday, March 27th 12:30 - 13:30
     
    The presentation will cover the innovative technique of injected composites, a relatively recent approach in dentistry. This method will be explained in a straightforward and accessible manner, allowing the audience to grasp the fundamentals. We will illustrate the process through everyday clinical cases, enabling a concrete application of the discussed concepts. The advantages and limitations of this technique will be presented transparently to offer a complete and realistic view of its potential. Finally, an interactive session with participants will provide an opportunity to address their questions and explore practical aspects of this method further.

     

  • Afbeelding Dr. Ludivine Facon
  • Afbeelding Dr. Michał Jaczewski
  • Dr. Michał Jaczewski

    Dr. Michał Jaczewski graduated from Wroclaw Medical University in 2006 and today runs his private practice in the city of Legnica, Poland. He specializes in minimally invasive dentistry and digital dentistry. He is founder of Biofunctional School of Occlusion. He gives a lectures and runs the workshops with focus on full comprehensive patient’s treatments.
     
    Thursday, March 27th 10:30 - 12:30
    Flow Injection Technique in Modern Dental Practice
     
    Thursday, March 27th 15:30 - 17:30
    Flow Injection Technique in Modern Dental Practice
     
     
    Why is this technique gaining popularity in today's world of dentistry? How can we transfer a digital design from a computer to a patient's teeth 100% accurately in the digital age? In which situations is this technique effective and why? What are the key elements of this technique? From design to final result. Which composites work best (which are suitable for the anterior vs. posterior regions)? Materials and tools needed to perform such a restoration, adhesive techniques, and why it’s important to simplify procedures.

     

  • Dr. Gintautas Rumbaitis

    Graduated from the Lithuanian University of Health Sciences in 2012. While working as a dentist, he realised that his area of expertise was restorations of molars. Since then, he has been deepening his knowledge and skills in this field. With the development of composite materials, more and more cases can be restored directly. They may not only look aesthetically, but most importantly - restore the function and anatomy of the teeth.
     
    Wednesday, March 26th 13:30 - 14:30
    Aesthetic Posteriors in Composite
     
    Wednesday, March 26th 15:30 - 16:30
    Aesthetic Posteriors in Composite
     
    Thursday, March 27th 14:30 - 15:30
    Aesthetic Posteriors in Composite
     
    This demonstration presents the direct resoration of posterior teeth with a special focus on occlusal surface modeling. It showcases combined techniques using both packable and flowable composites to achieve optimal shape and function.

     

  • Afbeelding Dr. Gintautas Rumbaitis
  • Afbeelding Peter Schouten
  • Peter Schouten

    Peter Schouten is Technical Manager at Kuraray Noritake Dental. As a chemical analyst, he uses his chemical background to provide insight at first sight into complex (product) technologies. His passion lies in easily communicating and sharing information about the application of products and techniques.
     
    Wednesday, March 26th 12:30 - 13:30
    Benefit from Universal Excellence
     
    Efficiency meets quality. Our aligned Universal Excellence product portfolio combines ease of use with reliable results. State-of-the-art technology makes it possible to perform many types of treatment with a limited number of products. I am happy to show you the different possibilities combining our Universal Excellence products and briefly discuss the technology behind them.

     

  • PD Dr. Adham Elsayed

    PhD degree in Prosthodontics and Implantology from the University of Kiel, Germany
    Certified Specialist in Prosthodontics, German Society for Prosthetic Dentistry and Biomaterials (DGPro)
    Certified Specialist in Implantology, German Society for Implant Dentistry (DGI)
    Clinical & Scientific Manager DACH, Kuraray Europe GmbH
     
     
    Der Kurs bietet einen Überblick über minimalinvasive Restaurationen, die Ihr Behandlungsspektrum erweitern können, und zeigt ein einfaches, übersichtliches Verfahren zur sicheren und ästhetischen Befestigung verschiedener Materialien. Lassen Sie sich inspirieren, wie Sie in der modernen adhäsiven Zahnmedizin die besten Ergebnisse erzielen können – sowohl in der Praxis als auch im Labor.

     

  • Afbeelding PD Dr. Adham Elsayed

  • Conférenciers laboratoires

     

  • Afbeelding MDT Ghaith Alousi
  • MDT Ghaith Alousi

    Ghaith Alousi successfully completed his training as a dental technician in his hometown Damascus (Syria) in 2013. At the same city, he was able to gain initial professional experience. When he came to Germany in 2016, he started working as a dental technician in a laboratory in Wiesbaden and attended diverse continuing education courses mainly in the field of porcelain layering and the imitation of nature. Currently, he is responsible for a wide range of activities: Tooth shade determination, try in of frameworks in practice and laboratory, photography and documentation, CAD/CAM implant work, veneers, crowns, bridges, inlays and onlays. He enjoys working with patients and staying in touch with dentists to achieve the best results.
     
    Friday, March 28th 09:30 - 11:00
     
    Saturday, March 29th 11:30 - 13:00
     
    A meticulously crafted, dynamic, and luminous layering approach with CZR, enhancing natural vitality and depth. Utilizing the One Bake technique on KATANA YML, this method achieves a harmonious fusion of translucency, brightness, and individualized character—bringing each restoration to life with exceptional vibrancy and precision.

     

  • MDT Alek Aronin

    Alek Aronin began training in St. Petersburg, Russia in 1990 before moving to Israel where he cultivated creating precision dentitions from porcelain. In 2001, he established a dental laboratory in Toronto, Canada. While managing his dental business, Alek traveled globally to further his training with master technicians including Mr. Aki Yoshida in Boston USA, Mr. Kataoka at Osaka Ceramic Training Center (OCTC) Japan, Mr. Michel Magne in Los Angeles, CA, and Mr. Aoshima who was his first source of inspiration in Japan. Now Alek is the owner of the Dental Laboratory and Morphology School in Spain. Focusing on Bonded Porcelain Restorations, Documentary Photography, and education. Alek has been lecturing and demonstrating for international events in USA, Mexico, Japan, Russia, and Europe for the past 18 years.
     
    Thursday, March 27th 09:30 - 11:00
     
    Thursday, March 27th 14:00 - 15:30
     
    Join Alek Aronin for an in-depth exploration of advanced ceramic techniques, focusing on internal staining, refined morphology, and surface texture. This session will highlight the latest innovations in MiLai ceramics and demonstrate how to achieve superior esthetic results with minimal layering.

     

  • Afbeelding MDT Alek Aronin
  • Afbeelding MDT Andreas Chatzimpatzakis
  • MDT Andreas Chatzimpatzakis

    Andreas graduated from the Dental Technology Institute (TEI) of Athens in 1999. During his studies he followed a program at the Helsinki Polytechnic Department of Dental Technique, where he trained on implant superstructures and all ceramic prosthetic restorations. As of 2000, he is running the ACH Dental Laboratory in Athens, Greece, specialized on refractory veneers, zirconia and long span implant prosthesis. In 2017 Andreas visited Japan where he trained under the guidance of Hitoshi Aoshima, Naoto Yuasa and Kazunabu Yamanda and become International Trainer for Kuraray Noritake Dental Inc..
     
    Friday, March 28th 14:00 - 15:30
     
    Saturday, March 29th 09:30 - 11:00
     
    This session will explore how ceramists can tailor their techniques to suit different core materials and case requirements, combining artistic skill and technical expertise for outstanding results. Key Demonstration Topics:
     
    1. Adaptive Ceramic Layering Concept:
    Customizing layering techniques for various core materials, ensuring optimal results for each case.

    2. Combining Veneers and Crowns in One Case:
    A live demonstration of layering techniques for Lithium Disilicate Veneers and Katana Zirconia Crowns, focusing on achieving harmony in esthetics and function.

    3. Material-Specific Layering Techniques:
    Highlighting how to adapt ceramic layering for translucency, fluorescence, and aesthetic balance based on the material.

    4. Pink and White Layering with MiLai:
    Showcasing the layering of white ceramics and gingival pink for complex restorations.

    Takeaway:
    Participants will leave with a deeper understanding of how to adapt their techniques to meet the unique demands of modern restorations, providing flexibility and precision in their work.

     

  • MDT Giuliano Moustakis

    Giuliano Moustakis has more than 30 years of expertise as dental technician. He was born in Greece but currently resides in Germany, where he has a lab in Falkensee. Giuliano studied at the School of Dental Technology (SBIE) in Athens, Greece. Over the years he completed several other studies in Germany and Japan, including: the maxillofacial prosthetic technician (IASPE), advanced education in functional diagnosis of the temporomandibular joint, Curriculum implant prosthetics for dental technicians (DGZI). He has been a global instructor at Kuraray Noritake Dental Inc. since 2019. Last but not least it is important to note that he is also a gifted and enthusiastic photographer.
     
    Wednesday, March 26th 14:00 - 15:30
     
    Saturday, March 29th 14:00 - 15:30
     
    The purpose of the workshop is to use the advantages of the new Kuraray/Noritake materials - especially the KATANA YML, the new low-fusing veneering ceramic CERABIEN MiLai, also the digital design of the zirconium oxide framework and Lithium Disilicate material to produce stable, functional, aesthetic restorations. The following topics will be covered:

    - The digital design of the framework
    - Carving before painting and sintering, through to texturing and surface treatment with tools, based on the morphological characteristics
    - Layering with tissue ceramic for the ginigival part until completion.

     

  • Afbeelding MDT Giuliano Moustakis
  • Afbeelding MDT Daniele Rondoni
  • MDT Daniele Rondoni

    MDT Daniele Rondoni was born in Savona in 1961, he lives and works in his hometown where he has been the manager and director of his own laboratory since 1982. Since 1994 he has lectured at some of the most prestigious dental symposiums around the world. In 2007 he was accepted as an active member of the European Association of Dental Engineers (EAED).
     
    Wednesday, March 26th 16:00 - 17:30
     
    Thursday, March 27th 11:30 - 13:00
     
    Join Daniele Rondoni at IDS 2025 for an exclusive live demonstration that challenges conventional materials and techniques in the fabrication of laminate veneers. This session will showcase the unmatched advantages of KATANA Zirconia YML over traditional lithium disilicate (LiDiSi) materials, with a special focus on speed sintering technology for ultimate efficiency without compromising esthetics.

     

  • MDT Nondas Vlachopoulos

    MDT Nondas Vlachopoulos has been the global opinion leader in Greece for Noritake dental products since 2001. Nondas specialises in aesthetic all-ceramic and implant restorations. He has established his own dental laboratory “AestheticLab” in Athens and collaborates with the Dental School of the National and Kapodistrian University of Athens and its postgraduate programmes of Dental Prosthodontics and Dental Surgery.
     
    Thursday, March 27th 16:00 - 17:30
     
    Friday, March 28th 11:30 - 13:00
     
    Friday, March 28th 16:00 - 17:30
     
    This program focuses on combining aesthetics, function, and biocompatibility through innovative techniques and artistic expertise. Nondas will guide participants step by step through the laboratory processes needed to achieve excellent and individualized results. Key Topics:

    - Framework Design: Enhancing the aesthetics of Pressable restorations with precise and thoughtful design.
    - Internal Staining Techniques: Techniques for increasing fluorescence and refining Zirconia restorations.
    - Feldspathic Veneers – One Bake Technique: A streamlined method for achieving impressive results with efficiency.

    The program is designed to provide practical insights and knowledge that participants can directly apply in their work.
  • Afbeelding MDT Nondas Vlachopoulos

Notre programme cabinets dentaires

Our programme deel 2a
Our programme deel 2b
Our programme deel 2c

Notre programme laboratoires

Our programme deel 3
Our programme deel 4