Case by MDT Daniele Rondoni and MDT Roberto Rossi

Full-contour or an anatomically reduced design? When we need to decide how we want to design and finish a zirconia restoration we are asked to produced, many factors need to be taken into account – from aesthetics to function and from time- to budget-related ones. As the outcomes are strongly dependent on the optical and mechanical properties of the zirconia used, however, we are convinced that the first thing to do is to select a portfolio of high-quality zirconia materials. By experimenting with them in the dental laboratory, using different designs and finishing approaches with aligned materials and by comparing the results, you will be able to select the most appropriate concepts for your everyday work. In addition, you will develop a clear idea on when to use which concept.

Our own selection

The zirconia portfolio used in our dental laboratory consists of the KATANA™ Zirconia Multi-Layered Series from Kuraray Noritake Dental Inc. It consists of three materials with a multi-layered colour structure designed to meet different needs with regard to flexural strength and translucency (KATANA™ Zirconia UTML, STML and HTML PLUS) and one material with colour, translucency and flexural strength gradation (KATANA™ Zirconia YML). Due to the favourable optical properties of this series and new effect liquids, it is often possible to opt for a full-contour design or – in the anterior region – for a slight cutback limited to the vestibular area plus a micro-layer of porcelain.

The effect liquids – Esthetic Colorant for KATANA™ Zirconia – were introduced n early 2023. They are applied to the surface of the milled zirconia to pre-treat tissue areas of large restorations, to add specific individual characteristics to the restoration or to prevent a greyish effect caused by the shining through of discoloured abutment teeth or metal parts. While most liquids are used on the outer surface of the restorations, the latter effect is achieved by applying Esthetic Colorant OPAQUE or WHITE to the intaglio.

Case example

The following case example describes the use of Esthetic Colorant in the context of producing a full-contour screw-retained implant bridge made of zirconia with a titanium bar. The zirconia part was milled from KATANA™ Zirconia YML, the vestibular morphology refined with rotating instruments and then, the vestibular, palatal and occlusal surfaces were treated with Esthetic Colorant as shown in Figures 1 and 2. The true colour effect is revealed after sintering.

Fig. 1. Frontal view of the milled zirconia structure after the application of Esthetic Colorant in the shades BLUE, GRAY, ORANGE and PINK.

Fig. 2. Occlusal view of the milled zirconia structure after the application of Esthetic Colorant BLUE, GRAY, ORANGE and PINK.

Fig. 3. Nicely pre-treated zirconia structure after sintering.

By adding some CERABIEN™ ZR FC Paste Stain and Glaze in the vestibular area and to the tissue parts, it is possible to finish this restoration in a nice way. The contact areas are always just polished to a high gloss in our approach, as it is the most antagonist-friendly way of treating the surface. As a final measure, the zirconia structure was connected to the titanium bar before it was sent to the dental office for try-in.

Fig. 4. Frontal view of the finalized zirconia part.

Fig. 5. Occlusal view of the structure after finishing.

Fig. 6. Connecting the zirconia superstructure and titanium bar.

Conclusion

With a well-selected zirconia portfolio and aligned finishing solutions, it is easy to establish concepts that allow you to respond to the needs of virtually every patient in a streamlined way. In our experience, the use of high-quality products with good aesthetic properties – a high translucency and naturally pre-shaded multi-layer structure – pays off as it allows us to reduce the thickness or do without a porcelain layer. In this way, we are able to increase the efficiency of our procedures without compromising the outcomes.

The KATANA™ Zirconia Multi-Layered Series and the new Esthetic Colorant for KATANA™ Zirconia support us in an ideal way by allowing us to efficiently produce a perfect base for whatever finishing approach we select.

TIPS AND TRICKS

Case by MDT Daniele Rondoni and MDT Roberto Rossi

Recently, Kuraray Noritake Dental Inc. has introduced Esthetic Colorant for KATANA™ Zirconia – dyeing liquids applied after milling of the company’s multi-layered zirconia. Enthusiastic users of the KATANA™ Zirconia Multi-Layered Series may wonder when and how to use the innovation: In combination with external stains, veneering porcelains or liquid ceramics, or as a replacement of those products? On the monolithic surface or on a dentin structure (framework)? And how much liquid produces the desired effect? Some technical guidance is provided in this article.

The good news: Esthetic Colorant fits perfectly into any existing approach, no matter whether you prefer a full-contour or cutback design. You may apply the liquids solely in a zero-bake technique – just individualize the milled restorations with Esthetic Colorant, fix the colours during the final sintering procedure and polish the surface. On the other end of the spectrum of options is the use underneath different layers of internal stains, porcelains and glaze.

WE UTILIZE ESTHETIC COLORANT MAINLY FOR THREE PURPOSES:

1. To add specific individual characteristics to the restoration, which are not generated by the multi-layered material structure, yet difficult to create with internal stains (examples are a more chromatic body area of a canine in comparison to the adjacent lateral incisor or pronounced mamelon structures). As the liquids diffuse into the structure, a depth effect is created.
   
   Eight liquids are available for the abovementioned purpose: A, B, C and D Plus for changing the brightness and creating shadows, BLUE, GRAY, ORANGE and BROWN for general characterization.

2. To pre-treat tissue areas to produce a perfectly shaded basis for the application of liquid ceramics (CERABIEN™ ZR FC Paste Stain) or Tissue Porcelain.
   
   Two liquids are available for this purpose: PINK AND VIOLET.

3. To prevent a greyish effect caused by the shining through of discoloured abutment teeth or metal parts (posts or implant abutments) – in this case, Esthetic Colorant OPAQUE or WHITE is applied to the intaglio of the restoration. The effect: the incoming light is blocked on the side of the dark element, while the natural translucency in the outer surface area of the restoration is maintained.

PURPOSE 1

An example of how to add specific individual characteristics to the surface of the restoration is the following full-arch case. After sintering, we just added a micro-layer of CERABIEN™ ZR Luster Porcelain and CERABIEN™ ZR FC Paste Stain Clear Glaze.

Fig. 1a. Frontal view of the complex restoration made of KATANA™ Zirconia HTML Plus after milling and the application of different shades of Esthetic Colorant.

Fig. 1b. Occlusal view of the complex restoration after milling and the application of different shades of Esthetic Colorant. Important: Every restoration characterized with Esthetic Colorant should be left to dry for at least 30 minutes prior to sintering.

Fig. 1c. Frontal view of the restoration after the final sintering procedure.

Fig. 1d. Occlusal view of the restoration after sintering.

Fig. 1e. Addition of a micro-layer of CERABIEN™ ZR Luster Porcelain.

FINAL SITUATION

Fig. 1f. Frontal view of the definitive restoration finished with CERABIEN™ ZR FC Paste Stain Clear Glaze.

Fig. 1g. Occlusal view of the final restoration.

Fig. 1h. Great incisal translucency.

PURPOSE 2

The effect of a pre-treatment of the tissue area of a complex restoration is illustrated with the aid of the following example case. Again, we opted for a nearly monolithic design with a minimal cutback in the incisal area of the teeth. The appearance of the originally tooth-coloured tissue area is modified visibly through the application of Esthetic Colorant in the shades PINK and GRAY. Some individual effects are added to the teeth as well.

Fig. 2a. Vestibular view of the milled restoration (material: KATANA™ Zirconia YML).

Fig. 2b. Palatal view of the milled restoration.

Fig. 2c. Vestibular pattern of application of Esthetic Colorant.

Fig. 2d. Palatal pattern of application of Esthetic Colorant.

Fig. 2e. Vestibular view of the restoration after the final sintering procedure.

Fig. 2f. Palatal view of the restoration after the final sintering procedure.

PURPOSE 3

Comparison of restorations on an implant abutment with and without Esthetic Colorant (EC):

HOW TO APPLY ESTHETIC COLORANT?

Essentially, Esthetic Colorant may be applied with any metal-free brush or pen. In our opinion, the best results are obtained by using the Liquid Brush Pen that has been specifically developed for the dyeing liquids. The pen’s housing is filled with the selected shade of Esthetic Colorant and allows for a controlled application, as the tip always dispenses the right amount of liquid and does not dry out. We utilize a separate Liquid Brush Pen for every shade that is frequently in use.

SINTERING PARAMETERS

After drying, which is essential for a good outcome, the restorations treated with Esthetic Colorant may be put into the sintering furnace and sintered according to the schedule recommended for the KATANA™ Zirconia Multi-Layered series. The parameters do not need to be adjusted.

CONCLUSION

The controlled application of Esthetic Colorant is easily accomplished by using the appropriate equipment, while the desired effects are obtained predictably. The liquids’ ease of use, the appropriate number of shades available and the achievable effects are just a few of the many benefits you will find when trying out the new system in your dental laboratory.

Case by CDT Daniele Rondoni and MDT Roberto Rossi

Working with high-translucency, multi layered zirconia (KATANA™ Zirconia Multi-Layered series from Kuraray Noritake Dental Inc.) paves the way toward indirect restorations that are closely adapted to our patients’ needs. Reduced wall thicknesses allow for minimally invasive tooth preparations, while polished zirconia in the occlusal contact areas provides for an antagonist-friendly behaviour. All this is possible due to the high aesthetic potential and homogeneous structure of the materials, which work well with a full-contour design or slight vestibular cutback. For individualization or characterization, different options are available. The portfolio of finishing solutions from Kuraray Noritake Dental has just been complemented by Esthetic Colorant for KATANA™ Zirconia, a set of twelve dyeing liquids for the company’s multilayered zirconia. They are applied to the milled restoration surface prior to sintering.

Some readers may wonder why there is a need for effect liquids applied to pre-shaded zirconia with a multi-layered colour structure. Being aware of natural teeth’s unique play of colours stemming from the shape and shade of the dentin core, however, the reason is quite obvious: Esthetic Colorant diffuses into the zirconia structure, hence allowing us to create depth effects even in monolithic restorations. Moreover, it enables the user to pre-treat tissue areas, and even by using the liquids on cutback designs, we are able to reproduce case-specific internal optical characteristics quite easily. Our standard approach for the use of Esthetic Colorant on KATANA™ Zirconia HTML Plus is described by means of the following case example: An implant- and tooth-based twelve-unit bridge with a slight vestibular cutback design, finished with Esthetic Colorant and CERABIEN™ ZR Porcelain.

Fig. 1. Restoration with sintering support removed from the blank.

Fig. 2. Esthetic Colorant for KATANA™ Zirconia: Available shades.

Fig. 3. Frontal view of the milled restoration after the application of Esthetic Colorant. A chromatic map is not needed since the colours of the applied liquids are clearly visible.

Fig. 4. Occlusal view of the milled restoration after the application of Esthetic Colorant. The liquids were applied with the Liquid Brush Pen for Esthetic Colorant.

Fig. 5. Frontal view: Appearance of the restoration after sintering.

Fig. 6. Occlusal view: Appearance of the restoration after sintering.

Fig. 7. Beautiful translucency and mamelon structures in the incisal area.

Fig. 8. Situation after the application of a thin layer of CERABIEN™ ZR Porcelain, which creates an enamellike window effect and reveals the play of colours found underneath.

Fig. 9. Restoration after firing and glazing.

FINAL SITUATION

Fig. 10. Beauty shots…

Fig. 11. … of the final restoration.

Easy handling and application, impressive colour effects: Esthetic Colorant perfectly fits into our micro-layering approach with a cutback design adjusted to the age and needs of every patient. Being applied on the pre-sintered zirconia surface, the liquids do not require any extra heat treatment – the restoration is simply dried and then sintered as usual. Esthetic Colorant may be used instead of or in combination with internal stains, luster porcelains and liquid ceramics – whatever complements a laboratory’s existing approach to highly aesthetic zirconia restorations.

Case by CDT Daniele Rondoni

When planning to replace Class II restorations, many things need to be considered. In order to select the most appropriate restorative technique and preparation design, it is essential to evaluate the amount and state of the remaining tooth structure, first. After repeated restoration replacement or in teeth originally restored with amalgam, for example, the remaining walls and cusps are often weakened and prone to fractures and cracks. When the cavity walls appear to be too thin or the structure is weak at the time of restoration replacement, it may be better to remove walls and cusps and opt for indirect adhesive restorations (overlays) instead of direct composite restorations. Due to favourable material properties – in particular a high flexural and compressive strength while being gentle to the opposing dentition and not too rigid for the surrounding tooth structures – we often opt adhesive restorations made of KATANA™ AVENCIA™ Block in those situations.

The following clinical case is used to describe the replacement of two composite restorations with overlays made of the innovative hybrid ceramic material.

Fig. 1. Initial clinical situation with composite restorations on the second premolar and first molar in need of replacement. The tooth structure particularly of the first molar was weak, with the distobuccal cusp already fractured.

Fig. 2. Prepared tooth structure ...

Fig. 3. Restorations milled from a KATANA™ AVENCIA™ Block after high-gloss polishing and characterization.

Fig. 4. Finalized restorations on a resin model.

Fig. 5. Adhesively cemented restorations in the patient’s mouth.

FINAL SITUATION

Fig. 6. Treatment outcome with a nice transition from the tooth structure to the restoration.

Case by MDT Daniele Rondoni and Dr. Enzo Attanasio.

Veneers made of zirconia? In some cases, like the one presented below, monolithic zirconia veneers may be an option. Reasons for selecting a latest-generation zirconia such as “KATANA™ Zirconia” YML include its very high translucency and a wall thickness of only 0.3 to 0.4 mm supporting minimally invasive tooth preparation. Due to a highly automated production procedure, the manual effort involved may be reduced, while highly aesthetic outcomes are possible.

Fig. 1. Initial situation: Young female patient with misshaped and misaligned maxillary incisors. Digital smile design is used to reveal the ideal proportions and positions of the anterior teeth.

Fig. 2. Ideal tooth proportions and positions displayed over a picture of the teeth after orthodontic treatment and the creation of a mock-up. The positions are ideal and the tooth shapes obtained with the mock-up only need some minor adjustments.

Fig. 3. Facial view of the patient with the planned veneers blended in.

Fig. 4. Guided tooth structure removal with the aid of a silicone index. The minimum wall thickness of the selected material – “KATANA™ Zirconia” YML – is 0.4 mm.

Fig. 5. Matched digital impressions of the maxilla and mandible taken after tooth preparation.

Fig. 6. Monolithic restoration made of “KATANA™ Zirconia” YML placed on the resin model after the 7-hour final sintering.

Fig. 7. Lateral view of the master cast with the six veneers individualized with the liquid ceramic system CERABIEN™ FC Paste Stain.

Fig. 8. Tooth-like translucency of the veneers on the model.

Fig. 9. Intra-oral try-in with two different shades of the PANAVIA™ V5 Try-in Paste: A2 is used in the right and Clear in the left quadrant. It was decided by the dentist to use A2 shade.

Fig. 10. Lateral view of the cemented veneers. The result is a natural surface texture, which contributes to a natural appearance of the restorations.

Fig. 11. Frontal view of the veneers in place.

Fig. 12. Treatment outcome immediately after rubber dam removal.

FINAL SITUATION

Fig. 13. Treatment outcome with healthy soft tissues two weeks after treatment.

Fig. 14. Gums are healthy and the restorations show a great optical integration with the adjacent posterior teeth.

Case by Daniele Rondoni, MDT

Evolution in the field of aesthetic dentistry never stops: KATANA™ Zirconia proves its aesthetic potential while also being great function-wise. The full zirconia palatal area is combined with an aesthetic buccal part where CZR Luster mass is only used.

Fig. 1. KATANA™ Zirconia HTML with vestibular cut-back opalescence bio-design.

Fig. 2. Palatal ”zirconia-free“ solution.

Fig. 3. Aesthetic vestibular layering with Luster porcelain.

Fig. 4. Manually polished palatal surface with Pearl Surface Z diamond paste.

Fig. 5. Self glazing in furnace for vestibular porcelain.

Fig. 6. Initial case.

Fig. 7. Hybrid solution.

Fig. 8. Palatal Zirconia free.

FINAL SITUATION

Fig. 9. 4 Years follow-up.

Case by MDT Daniele Rondoni

Usually, the aesthetic potential of a dental ceramic material – specifically its translucency – may be increased only at the expense of a decreased flexural strength. The new KATANA™ Zirconia YML from Kuraray Noritake Dental Inc. is different. With its high flexural strength of 1,100 MPa in the lower half of the blank and high translucency in the upper body and incisal areas, it has a high aesthetic potential and an unlimited indication range, as shown using the following case example.

Fig. 1. KATANA™ Zirconia YML 4-unit and 6-unit bridges after milling and sintering. A natural vestibular surface texture plays a decisive role in the creation of aesthetic monolithic restorations.

Fig. 2. The two bridges on the model after ultra-micro layering with CERABIEN™ ZR FC Paste Stain Kuraray Noritake Dental Inc.).

Fig. 3. Stained and glazed restorations and their translucency in transmitted light.

FINAL SITUATION

Fig. 4. Buccal view of the 6-unit bridge cemented in the patient’s mouth.

Fig. 5. Buccal view of the 4-unit bridge cemented in the patient’s mouth.

With this new type of multi-layered zirconia, it is possible to produce aesthetic monolithic restorations suitable even for use in the anterior area. A high design flexibility is offered despite strength gradation, and the high translucency in the incisal area is responsible for a natural look after sintering. Ultra-micro layering and glazing on the monolithic surface will be sufficient to produce outcomes to our patients’ satisfaction.

Case by Dr. Daniele Rondoni, RDT

Check out how beautiful zirconia restorations are finalized using CERABIEN™ ZR FC Paste Stain, take a look at the color palette used by Dr. Daniele Rondoni to achieve outstanding aesthetic results.

“CERABIEN™ ZR Paste Stain is a material developed for micro-layering on the full-contour zirconia surface. With it, natural, true-to-life optical effects are created in an efficient way. I apply the pastes in the esthetic areas, while the functional parts of the restorations are only polished.”

By Daniele Rondoni, RDT

Considering different criteria to select the ideal zirconia and frame design to meet the level of esthetics requested.

Step 1
Final Preparations.

Step 2
Zirconia Frame (KATANA Zirconia STML A2) cut-back designed to reproduce translucent incisal area.

Step 3
Application of 1st Internal Stain and firing.

Step 4
Application of 1st Luster, Clear Cervical and firing.

Step 5
Application of 2nd Internal Stain and firing.

Step 6
Application of 2nd Luster, and Opacious Body.

Step 7
Completion of firing.

Step 8
Completion of morphological correction.

Step 9
Post-operative view.

By Daniele Rondoni, RDT

Preoperative view

1 PFM. 3 Laminates on refractory

Postoperative view

NORITAKE SUPER PORCELAIN EX-3 CHROMATIC MAP