Case by Andreas Chatzimpatzakis

Many modern, tooth-coloured dental materials enable us to achieve more with less. By using high-strength ceramics with a multi-layered colour structure and natural translucency, for example, the path to the desired outcomes involves fewer components, smaller layers and a reduced number of bakes. A possible streamlined procedure is illustrated below. The main materials used were KATANA™ Zirconia HTML PLUS for the screw-retained implant-supported superstructure and CERABIEN™ MiLai (both Kuraray Noritake Dental Inc.) for vestibular micro-layering.

Fig. 1. Zirconia-based screw-retained implant-supported prosthesis after milling and carving to obtain a natural surface texture.

Fig. 2. Restoration after sintering. To intensify the colour characteristic of the multi-layered blanks, the surface was treated with Esthetic Colorant (mainly in the incisal area and the gum parts).

Fig. 3. Appearance after the application of CERABIEN™ MiLai SS Fluoro.

Fig. 4. Restoration after the application of CERABIEN™ MiLai internal stains. They add some natural shading effects to the tooth and gum areas.

Fig. 5. Restoration on the model after micro-layering. In the cervical area, CERABIEN™ MiLai LT1 was mainly used, while the middle and incisal areas were individualized with E2 and Tx, the latter adding a seamless gradient in translucency. For the gingiva, the choice fell on the tissue porcelains 1, 5 and 6.

Fig. 6. Finished restoration on the model.

Fig. 7. The micro-layer of porcelain has a brilliant effect.

Fig. 8. The lifelike appearance is due to a smart combination of surface texturing …

Fig. 9. … and micro-layering with a comprehensive set of internal stains plus porcelains.

CONFIDENCE AND CONTROL

Full ceramic layering can produce beautiful results, but can be quite complex and time-consuming. In times with limited availability of skilled personnel and high-performance materials being offered, it may be a valuable strategy to opt for micro-layering with CERABIEN™ MiLai whenever appropriate. The system provides precise control over the layering and shading procedure, so that highly aesthetic and functional outcomes are easily and confidently obtained.

Dental technician:

ANDREAS CHATZIMPATZAKIS

Andreas graduated from the Dental Technology Institute (TEI) of Athens in 1999. During his studies he followed a program at the Helsinki Polytechnic Department of Dental Technique, where he trained on implant superstructures and all ceramic prosthetic restorations. As of 2000, he is running the ACH Dental Laboratory in Athens, Greece, specialized on refractory veneers, zirconia and long span implant prosthesis. In 2017 Andreas visited Japan where he trained under the guidance of Hitoshi Aoshima, Naoto Yuasa and Kazunabu Yamanda and become International Trainer for Kuraray Noritake Dental Inc..

CLEARFIL™ Universal Bond Quick 2

Nykyaikaisessa hammashoidossa tehokkuus ja luotettavuus ovat avainasemassa monilla vastaanotoilla. CLEARFIL™ Universal Bond Quick 2 on vaivaton ja tehokas sidosratkaisu, joka tuottaa ensiluokkaisia tuloksia. Advanced Rapid Bond -tekniikka nopeuttaa ja helpottaa sidosaineen levittämistä, sillä tarpeettomat työvaiheet ja tekninen pikkutarkkuus jäävät pois. 

Mikä CLEARFIL™ Universal Bond Quick 2 on? 

CLEARFIL™ Universal Bond Quick 2 on kehittynyt hammashoidon sidosaine, joka on suunniteltu sujuvoittamaan korjaavia toimenpiteitä. Se sopii yhteen valitsemiesi etsaustekniikoiden kanssa ja sitoutuu voimakkaasti kiilteeseen ja dentiiniin, mikä takaa vahvan ja yhtenäisen sidoskerroksen. Tämä monipuoline tuote soveltuu sekä suoriin että epäsuoriin restauraatioihin, pilarinrakennukseen ja suun sisäisiin korjauksiin. 

Missä tätä sidosratkaisua voidaan käyttää? 

CLEARFIL™ Universal Bond Quick 2 on ihanteellinen valinta kaikille hammaslääkärin vastaanotoille, joilla kaivataan luotettavaa ja helppokäyttöistä sidosainetta. Tämä tasalaatuisesti toimiva sidosaine yksinkertaistaa työnkulkua sekä rutiininomaisissa suorissa restauraatioissa että monissa epäsuorissa toimenpiteissä

Mitkä ovat CLEARFIL™ Universal Bond Quick 2 -sidosaineen käyttöaiheet?

Tämä sidosaine on suunniteltu monenlaisiin kliinisiin käyttökohteisiin: 

• Suoriin restauraatioihin, joissa käytetään valokovetteista yhdistelmämuovia 
• Preparoidun kaviteetin tai tukihampaan sulkemiseen osana epäsuoran restauraation valmistelua
• Paljastuneiden juuripintojen hoitoon 
• Vihlovien hampaiden hoitoon 
• Lohjenneiden restauraatioiden korjaamiseen suun sisällä 
• Juurikanavanastojen sementointiin ja pilarinrakennukseen 
• Epäsuorien restauraatioiden sementointiin 

Miksi CLEARFIL™ Universal Bond Quick 2 toimii niin hyvin?

Sen poikkeuksellisen suorituskyvyn takaa ennen kaikkea patentoitu Advanced Rapid Bond -tekniikka, joka koostuu kolmesta tehokkaasta ainesosasta:

• Alkuperäinen MDP-monomeeri: KURARAY CO., LTD.:n keksimä monomeeri sitoutuu ennennäkemättömän lujasti hydroksiapatiittiin ja moniin muihin materiaaleihin, kuten zirkoniumoksidiin. Se muodostaa erinomaisen sidoksen, joka säilyy pitkään vakaana. 
• Amidimonomeeri: Erittäin hydrofiilinen monomeeri, joka tunkeutuu nopeasti hampaan rakenteeseen, jolloin levittämisen jälkeen ei tarvitse odotella. Polymeroinnin aikana se muodostaa lujan ja kestävän sidoksen vakaan ja hydrofobisen ristisilloitetun verkoston avulla. 
• Uretaanitetrametakrylaattimonomeeri (UTMA-monomeeri) Tämä monitoiminen monomeeri parantaa varsinaisen sidoskerroksen lujuutta, vähentää sen kutistumisalttiutta ja pitää 

Yhdessä nämä monomeerit muodostavat CLEARFIL™ Universal Bond Quick 2 -sidosaineen perustan ja tekevät siitä nopean, luotettavan ja monipuolisen tuotteen kaikenlaiseen korjaavaan käyttöön. 

Miksi valita CLEARFIL™ Universal Bond Quick 2? 

CLEARFIL™ Universal Bond Quick 2 parantaa tehokkuutta laadusta tinkimättä. Sen kehittyneessä Rapid Bond -tekniikassa yhdistyvät MDP-, amidi- ja UTMA-monomeerit, jotka luovat vahvan ja yhtenäisen sidoskerroksen. Tämä mahdollistaa tasaisen leviämisen ja ylivertaisen lujan sidoksen sekä kiilteeseen että dentiiniin. Matalan juoksevuustason koostumus muodostaa ohuen ja yhtenäisen kalvon, mikä vähentää sidosaineen kasautumisen riskiä ja parantaa sen toiminnan ennakoitavuutta.

Muita etuja ovat esimerkiksi: 

• Nopea ja yksinkertainen levittäminen 
• Yhdenmukaisesti luja sidos
• Monipuolinen soveltuvuus erilaisiin korjaaviin tekniikoihin
• Pienempi sidosaineen kasautumisen ja kontaminaation riski 
• Yhteensopivuus itsekiinnittyvien hartsisementtien kanssa 
• Säilytys kätevästi huoneenlämmössä 

Miten CLEARFIL™ Universal Bond Quick 2 -sidosainetta käytetään? 

Levittäminen on yksinkertaista ja tehokasta, mikä sopii monenlaisiin kliinisiin käyttötilanteisiin. Sidosainetta voi käyttää 

• Itse-etsaukseen, joka on nykyaikainen, nopea ja tehokas menetelmä 
• Selektiiviseen etsaukseen, kun kaivataan erikoislujaa sidosta kiilteeseen 
• Totaalietsaukseen, joka on perinteinen tekniikka

It is available in both bottle and unit-dose options, catering to different practice needs and ensuring easy, on-demand use.

Omaa luokkaansa oleva sidosratkaisu: CLEARFIL™ Universal Bond Quick 2 

CLEARFIL™ Universal Bond Quick 2 on hammashoidon uusin sidosinnovaatio, joka tarjoaa tehokkuutta, luotettavuutta ja monipuolisuutta. Tämä sidosaine ei vaadi odottelua, pitkää hankausta tai useiden kerrosten levittämistä, vaan yksinkertaistaa toimenpiteitä ja takaa lujat ja pitkäkestoiset restauraatiot. Poikkeuksellisen suorituskykynsä ja yksinkertaistetun työnkulunsa ansiosta se on todellinen joka paikan sidosaine nykyaikaiseen vastaanottokäyttöön. 

THE HEART OF THE UNIVERSAL PORTFOLIO

Kuraray Noritake Dental Inc. tuntee nykyaikaisen hammashoidon vaatimukset. Monimutkaisten toimenpiteiden, tiukkojen aikataulujen ja potilaiden hoitotarpeiden yhteensovittaminen ei ole helppoa. Olemme käyttäneet vuosia materiaaliemme kehitystyöhön – jotta sinä voisit keskittyä olennaiseen, eli potilaisiin. 

Universal-tuotteemme yksinkertaistavat työnkulkuasi ja tarjoavat käyttöösi laadukkaita materiaaleja ja työkaluja, jotka täydentävät saumattomasti asiantuntemustasi. CLEARFIL™ Universal Bond Quick 2 kirjaimellisesti sitoo yhteen useita tuotevalikoimamme yleiskäyttöisiä hartsipohjaisia tuotteita. Tämän lisäksi erillistä kaksoiskovetteisten materiaalien aktivaattoria ei tarvita, kun tuotetta käytetään muiden valmistajien itsekiinnittyvien sementtien kanssa. 

TEETHMATE™ DESENSITIZER RECOGNIZED AS TOP PRODUCT YET AGAIN

Dental Advisor has recognized TEETHMATE™ DESENSITIZER as a Top Product in the category of Hygiene – Desensitizer yet again. This year’s recognition – the eleventh in a row (2015 – 2025) – was announced in the January/February 2025 issue of the publication. TEETHMATE™ DESENSITIZER allows an effective non-invasive approach to the treatment of hypersensitivity – a painful condition that generally occurs when dentinal tubules are exposed – when used as directed by dental professionals.

HOW IT WORKS

TEETHMATE™ DESENSITIZER is designed to crystalize hydroxyapatite (HAp), a mineral that is naturally found in enamel and dentin, and is the human body’s strongest material. When applied to exposed, mechanically treated, or freshly prepared dentin, the calcium phosphate-based mixture blocks the exposed tubules and provides immediate pain relief. During setting, HAp is formed, providing for long-term prevention of hypersensitivity. Further, when used in the context of restorative treatment, TEETHMATE™ DESENSITIZER does not have a negative effect on the bond strength of subsequently utilized dental adhesives or cements.

BENEFITS IN A NUTSHELL

TEETHMATE™ DESENSITIZER is a versatile solution providing hypersensitivity relief independent of the cause. It is perfectly suited for

• Treatment of dentin exposed by toothbrush abrasion, gingival recession, periodontal disease and/or acid erosion.
• Treatment of dentin after mechanical tooth cleaning, scaling and/or root planing.
• Treatment of the tooth surface before and after bleaching.
• Treatment of prepared dentin for fillings and/or prosthetic restorations.

The use of the product is also beneficial as it is

• Easy to mix and apply.
• Proven to be effective.
• Tissue-friendly and highly biocompatible.

OUTSTANDING CLINICAL PERFORMANCE RATING: 96 PERCENT

In a clinical evaluation, the Dental Advisor consultants found TEETHMATE™ DESENSITIZER effective in providing hypersensitivity relief immediately following and for up to six months after application. The study evaluated 27 patients diagnosed with gingival recession-related hypersensitivity, which was diagnosed using thermal testing with cold air. For the initial assessment, patients were asked to evaluate their level and frequency of hypersensitivity per tooth on a five-point scale. They were questioned about their level of sensitivity immediately after TEETHMATE™ DESENSITIZER was applied, according to the instructions for use, and again six months later. At baseline, 91 percent of the patients stated that they had no or only mild, sporadic sensitivity, which was still the case for 85 percent after six months.

Among the consultants’ comments were

• “TEETHMATE DESENSITIZER is easy to apply and seems to provide consistent relief.”
• "At six months, the majority of patients continue to experience marked improvement from their preoperative sensitivity or no sensitivity at all."

As a result, the product received a clinical performance rating of 96 percent.

ABOUT DENTAL ADVISOR

The Top Product and Preferred Product Awards from Dental Advisor, a US-based organization, were initiated to help busy practitioners navigate the variety of new dental solutions available, particularly for less invasive techniques and standardized procedures. These awards aim to identify products that improve outcomes consistently. Dental Advisor conducts clinical evaluations and product performance tests shortly after a product’s launch and publishes annual results online to help practitioners identify high-quality dental materials suited to their specific needs.

For more information, visit Dental Advisor at: www.dentaladvisor.com

Interview with Dr. Ludivine Facon

Individual prophylaxis, early defect detection and treatment, minimally invasive restorative techniques: In her joint dental practice in Anstaing, France, Dr. Ludivine Facon does everything in  her power to keep her patients’ teeth healthy for their lifetime. When we met her at the International Dental Show in Cologne, where she was a speaker for Kuraray Noritake Dental Inc., we asked her to share information about her treatment philosophy and how flowable injection fits into her overall approach.

Your treatment philosophy seems to be minimally invasive. Would you please tell us a bit more about it?

Ever since I started treating patients, my priority has always been to preserve the dental tissues and to be as minimally invasive as possible when restoration is required. My interest in prevention started with my thesis in 2000, which focused on oral health prevention in Quebec, Canada, a country where prophylactic care is an integral part of dental treatment. I have always been highly interested in individual prophylaxis, which naturally led me to focus on minimally invasive treatments. My goal is to stay as low as possible on the therapeutic gradient, always thinking about the long-term benefits for the patient.

What are the benefits of this approach for your practice?

Integrating prophylaxis for every patient into my practice allows me to work with excellent surface conditions for bonding. The oral environment is sanitized before applying conservative restorations, and carious lesion removal is kept to a minimum.

When defects – be it a carious lesion or severe tooth wear – are present, I use the following instruments and materials that allow for truly minimally invasive interventions:

• Rondoflex 50-micron sandblaster to roughen the surface,
• Micro diamond burs to remove what is necessary,
• Layered composites for single-tooth restorations,
• Injected composites when multiple teeth are involved.

Case predestined for composite injection, as multiple teeth in the maxilla need to be treated (smile makeover).

What dental materials do you use for your restorative procedures?

I am a hands-on dentist, and in my daily practice, I strictly follow surface preparation and bonding protocols recommended for CLEARFIL™ Universal Bond Quick 2 (Kuraray Noritake Dental Inc.). In addition, I use high-quality composites from Kuraray Noritake Dental Inc. For layering, CLEARFIL MAJESTY™ ES-2 Premium Enamel and Dentin are my got-to solution, while I use CLEARFIL MAJESTY™ ES Flow Low for injection.

What are the benefits of a conservative approach for your patients?

Patients appreciate the fact that my treatment approach is as conservative as possible while still allowing for easy reintervention if necessary, preserving as much healthy dental tissue as possible. Another significant advantage is the moderate cost, which makes the treatment more accessible.

How does composite injection fit into this philosophy?

This technique allows for an easy reconstruction of multiple teeth by transferring a wax-up designed in the lab into the mouth via an injection of modern flowable composite into a transparent silicone index. Patients like this technique because it is aesthetic, reliable, reproducible and minimally invasive. A major advantage is that it allows for touch-ups and repairs, making it a reassuring solution. In some cases, no tooth preparation is needed at all—we simply add material, making the whole treatment truly non-invasive.

Why do you think this technique is promising?

It is a trendy and promising technique because:

• It is non-invasive --> preserves tissues --> aligns with minimally invasive dentistry.
• It is predictable --> due to the index, the technique is reproducible.
• It is easier than traditional layering --> saves chair time and improves patient comfort.
• It is cost-effective --> a cheaper alternative to ceramic veneers.
• It allows for repairs at any time, making it a reassuring option.

How did you proceed before knowing this technique?

In the anterior region, I used traditional composite layering with a wax-up and a palatal silicone index. It allowed me to rebuild the palatal wall and provide for precise incisal edge placement. In the posterior region, I used inlays, onlays, or overlays made of lab-processed reinforced composite or lithium disilicate.

Transparent silicone index with injection hole used to inject the flowable composite and restore the tooth to its planned shape.

What made you start using the new technique?

There has been an explosion in demand for smile enhancements, especially among young adults. The composite injection technique is an appealing alternative for reshaping smiles in young patients with intact teeth but unsatisfactory size or shape. It is less invasive than veneers, which have gained popularity due to social media trends, but often require significant tooth preparation.

How did you proceed in the beginning?

I first discovered the technique in a specialized journal in 2019, then trained myself using online tutorials. Of course, there were some trial-and-error moments, but it is a very accessible technique—even for beginners. To achieve optimal results, I believe that proper case selection and treatment planning are key. One of the most important preconditions for aesthetic outcomes is that the patient’s teeth have a simple shade structure. If the shade structure of the teeth is complex or the required restoration is large, it is better to layer the dentin before injecting the enamel. Moreover, it is essential to produce two models in the wax-up phase, not just one: An “intermediate wax-up model” with every other tooth featuring the wax-up, while the remaining teeth remain unmodified. The second is a “full wax-up model” with all teeth reshaped.

Considering these aspects, it is possible to obtain great outcomes quite quickly. The learning curve is steep, however – as with every new technique to be implemented – you need to step out of your comfort zone.

Apart from CLEARFIL™ Universal Bond Quick 2 and CLEARFIL MAJESTY™ ES Flow Low you already mentioned, what instruments and materials do you use?

For treatment planning including the wax-up, I use digital technology via Smilecloud, but a traditional wax-up works just as well. The production of the silicone index is the most delicate part when doing it in-house. I recommend using EXACLEAR (GC), the only truly effective transparent silicone currently available. Adjacent teeth are isolated with PTFE tape. Finishing instruments that have proven their worth are:

• Scalpel Blade No. 12,
• 3M™ Sof-Lex™ Contouring and Polishing Discs (Solventum),
• Red-ring fine diamond burs,
• TWIST™ DIA for Composite polishers (Kuraray Noritake Dental Inc.).

Intermediate wax-up model: One tooth with wax-up followed by one tooth without.

Full wax-up model.

Do you believe that the quality of the outcome is affected by the composite material you use?

Absolutely! New high-filled flowable composites, like CLEARFIL MAJESTY™ ES Flow Low, offer excellent mechanical properties and polishability, making them very promising.

Highly aesthetic treatment outcome after injection of CLEARFIL MAJESTY™ ES Flow Low.

What material characteristics impact overall quality?

First of all, the optical properties or shade matching ability of the material are crucial. I like the fact that I can select from a variety of shades when using CLEARFIL MAJESTY™ ES Flow. Once the right shade is selected and the thickness of the injected layer does not exceed 1 mm, the optical properties of the restorations may be expected to be exceptional.

Moreover, we need a material with great flow properties (fluid, but not too runny), which is virtually void-free. I prefer using low viscosity flowable composites like CLEARFIL MAJESTY™ ES Flow Low (two other flowabilities – HIGH and SUPER LOW – are also available). The physical properties (mechanical strength) and polishability plus polish retention are also important. They are usually excellent with premium flowable composites.

What are your most important clinical tips and tricks?

For beginners:

• Press firmly on the cervical area of the silicone index to reduce excess material upon removal.
• Finish the proximal area thoroughly before moving to the next injection step. This way, you provide for perfect key positioning for the following teeth.

If you follow the protocol, the technique is very beginner friendly!

What is your opinion about the emerging hybrid "layering & injection" technique?

This hybrid technique complicates the original injection technique, which is meant to simplify composite restorations. However, it is very useful in cases where aesthetic complexity requires layering. For maximum mimicry with this technique, I would love to have injectable composites in an enamel shade at my disposal.

Would you please share your final thoughts with us?

Take your time planning! Observe, document, take photos, use digital tools! Less is more.

Dr. Facon, thank you very much!

Dentist:

LUDIVINE FACON

Dr. Ludivine Facon graduated from the University of Lille, where she developed a solid foundation in dentistry. Passionate about periodontology and dental aesthetics, Dr. Facon pursued specialized training to refine her skills in these fields. In 2007, she completed clinical periodontology training at the Charon Clinic, followed by individual dental prophylaxis training with Michel Blique in 2008. From 2013 to 2014, she attended the long cycle program at the Académie du Sourire in Aix-en-Provence, enhancing her expertise in dental aesthetics. Dr. Facon continued to build on her knowledge with international training, including at the International Institute of Periodontology in Montreal in 2015, and a veneer training course at the GAD Center in Bordeaux the same year. In 2016, she further advanced in mucogingival surgery at the Académie de Parodontologie in Aix-en-Provence. Always keeping up with the latest developments, she participated in the CIDAE training in Brussels in 2022. More recently, in 2024, Dr. Facon completed a course in composite layering and injection, led by Guillaume Piskorski, the French specialist in injected composite technique, in Lille. With extensive expertise, Dr. Facon is also an educator in direct aesthetic composites, having taught at the University of Lille in 2020, 2022, 2023, and 2024.

In part two of this veneer workflow, Roberto Rossi completes the restoration by applying CERABIEN™ MiLai lusters to the pre-stained and sintered KATANA™ Zirconia YML. Watch as he enhances surface texture, gloss, and lifelike detail through precise finishing techniques.

With just a few simple steps, Roberto creates depth, dynamic light effects, and natural contours that rival real enamel. The process is intuitive and efficient, delivering a high-end finish—culminating in a final self-glazing fire for a polished, natural result.

An intelligent solution for dental technicians seeking efficiency without compromising on aesthetics.

In the first part of this aesthetic veneer workflow, dental technician Roberto Rossi demonstrates how to apply internal stains to KATANA™ Zirconia YML. This crucial step enhances the restoration by adding depth, translucency, and natural character from within.

After refining the anatomy and surface texture, Roberto skillfully blends and applies selected shades such as A+, Fluoro, and Incisal Blue. These shades create depth, opalescence, and inner vitality that radiate through the final restoration.

A must-watch for dental technicians looking to elevate their zirconia restorations with advanced, yet straightforward, internal staining techniques.

EUROPEAN KOLS EXPERIENCE INNOVATION AND CRAFTSMANSHIP IN JAPAN

This September, seventeen of Kuraray Noritake Dental’s Key Opinion Leaders (KOLs) from across Europe—representing nine countries—embarked on a remarkable journey to Japan. The program offered a rare opportunity to experience the heart of Kuraray Noritake Dental’s culture of innovation, craftsmanship, and collaboration.

A JOURNEY OF INSIGHT AND INSPIRATION

The tour began in Tokyo, where the group traveled by bullet train to Nagoya to explore some of Japan’s cultural and professional landmarks. Visits to Nagoya Castle and the historic Noritake Garden provided glimpses into the artistry and heritage that continue to inspire our company’s ceramic technologies today.

Nagoya castle.

That evening, an official dinner in Nagoya brought together the European guests and key members of the Kuraray Noritake Dental team, including Ms. Kiyoko Ban, Mr. Yoshihisa Yamada, and Mr. Kazuhiro Yamada. It was an evening filled with rich conversations, meaningful connections, and a shared vision for the future of dental excellence.

FROM CONCEPT TO CREATION: VISITING THE MIYOSHI AND NIIGATA FACTORIES

The following day, the KOLs visited the Miyoshi Factory, where the company’s ceramic products such as KATANA™ Zirconia are manufactured, and  attended insightful presentations by their European peers — including Jorgen Gad, Sophie Dallem, Dumitru Leahu, Marios Georgoulis, Stratos Chatzichristos, and Kamila Krzepkowska — followed by a comprehensive factory tour and in-depth discussions  with R&D experts on zirconia and dental lab materials, providing unique professional insights.

Discussion with Kuraray Noritake Dental team at Miyoshi Factory.

Presentation given by DT Sophie Dallem and DT Dumitru Leahu at Miyoshi Factory.

Presentation given by DT Marios Georgoulis at Miyoshi Factory.

The tour also brought our KOLs to Niigata, where participants experienced firsthand the research and development process behind Kuraray Noritake Dental’s renowned products. A highlight was the hands-on demonstration of CLEARFIL MAJESTY™ ES Flow Universal, allowing each participant to engage directly with the materials and processes that define the company’s quality.

Hands-on course at Niigata plant.

CONNECTING THROUGH COLLABORATION

Between technical sessions, the group visited the Tokyo office and showroom, sharing open discussions with our Japanese colleagues at the headquarters, followed by a sightseeing tour through Tokyo’s landmarks — from the Imperial Palace to Tokyo Tower. These shared experiences strengthened the sense of partnership and mutual respect not only between the European and Japanese teams but also between the KOLs themselves and the company.

“It was an incredible experience meeting exceptional people worldwide, among them top specialists.” 
—    DT Kamila Krezpkowska, Poland

Discussion with Kuraray Noritake Dental team at the Tokyo headquarters.

WORDS FROM OUR KOLS

The feedback from participants was overwhelmingly positive:

“It was truly a lifetime experience — both inspiring and invaluable for me as a dental technician. Witnessing how the materials we use every day are created gave me an even deeper appreciation for the craft behind them.”
— DT Marios Georgoulis, Greece

“I’m so impressed by the organization, the endless friendliness, the openness, and the willingness to answer all my questions. It was a wonderful time, filled with so many experiences.” 
— Dr. Bernhild Stamnitz, Germany

“It was a life experience I will never forget and I am very grateful I got this opportunity to be there.[…] The drive and compassion of all the workers in office, but also at the factory were very impressive to see. The view I had about the quality of your product improved more than it already was.” 
—  Dr. Mark Laske, Netherlands

A SHARED COMMITMENT TO EXCELLENCE

The KOL Japan Tour 2025 was more than a professional visit—it was a bridge between continents, uniting people through shared values of precision, innovation, and artistry. Kuraray Noritake Dental extends heartfelt thanks to all participants and to the teams in Japan who made this unforgettable experience possible.

Group picture at the Kuraray Noritake Dental office in Tokyo.

Arigato!

Case by Andreas Chatzimpatzakis

A CONCEPT EVEN FOR AESTHETICALLY DEMANDING CASES

The micro-layering technique is regarded as a more efficient, streamlined approach used as an alternative for full porcelain layering. It requires aesthetic, high-strength ceramics like lithium disilicate or zirconia as a base and – ideally – a set of porcelains specifically designed for reduced layer thicknesses that allows users to focus on imitating the characteristics of enamel. A high-quality example is CERABIEN™ MiLai (Kuraray Noritake Dental Inc.). Consisting of a set of internal stains and porcelains with a firing temperature of just 740 °C and a coefficient of thermal expansion in the range of 9.5~11.0×10-6/K (50 °C – 500 °C), this product works well on lithium disilicate and zirconia.

Its aesthetic potential is surprisingly high: Depending on case-specific requirements, users are given the choice between maximum efficiency using a single-bake technique and maximum aesthetics achieved with more complex layering. The latter option is demonstrated below using the example of six maxillary anterior veneers.

Fig. 1. Lithium disilicate frameworks (Amber Press) on the model.

Fig. 2. CERABIEN™ MiLai Value Liner 1 applied to the framework. This porcelain is typically used on lithium disilicate for wash baking.

Fig. 3. First build-up with CERABIEN™ MiLai CCV2 in the cervical section, …

Fig. 4. … Value Liner 2, …

Fig. 5. … Creamy Enamel in the middle area …

Fig. 6. … and Tx used to add ultimate translucency.

Fig. 7. Appearance of the restorations after the first bake.

Fig. 8. Outcome of the internal staining procedure.

Fig. 9. Application of CERABIEN™ MiLai LT1 for a standard translucency and opalescence effect, …

Fig. 10. … E2, …

Fig. 11. … a mixture of E2 and ELT1 (mixing ratio: 50:50) for translucency and brightness and along the marginal ridges, …

Fig. 12. … Tx mixed with Royal Blue (mixing ratio 70:30) for a blueish translucency in the incisal area…

Fig. 13. … as well as a final layer of LTx to add ultimate translucency and opalescence to the whole enamel surface.

Fig. 14. Outcome of the third bake.

Fig. 15. Cutback for the final layer of porcelain.

Fig. 16. Final layer of CERABIEN™ MiLai added to the central and lateral incisors for translucency.

Fig. 17. Situation after the fourth bake, grinding and use of a rubber polisher.

Fig. 18. Outcome of the fifth bake (self-glaze).

Fig. 19. Beauty shots …

Fig. 20. … of the restorations …

Fig. 21. … on the model.

TRULY BEAUTIFUL OUTCOMES POSSIBLE

This case example reveals that CERABIEN™ MiLai is much more than just a maximum-efficiency solution: With the current line-up of porcelains and internal stains, truly beautiful restorations can be produced. Hence, users are given high flexibility regarding not only the high-strength framework material they prefer, but also the effort and time they would like to invest. This makes CERABIEN™ MiLai a versatile porcelain system that meets many needs and covers a wide range of applications in the dental laboratory.

Dental technician:

ANDREAS CHATZIMPATZAKIS

Andreas graduated from the Dental Technology Institute (TEI) of Athens in 1999. During his studies he followed a program at the Helsinki Polytechnic Department of Dental Technique, where he trained on implant superstructures and all ceramic prosthetic restorations. As of 2000, he is running the ACH Dental Laboratory in Athens, Greece, specialized on refractory veneers, zirconia and long span implant prosthesis. In 2017 Andreas visited Japan where he trained under the guidance of Hitoshi Aoshima, Naoto Yuasa and Kazunabu Yamanda and become International Trainer for Kuraray Noritake Dental Inc..

CLEARFIL MAJESTY™ ES Flow Universal voitti RESEARCH AWARD -PALKINNON

Kuraray Noritake Dental Inc. lanseerasi uuden juoksevan yhdistelmämuovin, jolla on yksinkertaistettu sävykonsepti: CLEARFIL MAJESTY™ ES Flow Universal. Yhdysvalloissa ilmestyvän Dental Advisor -julkaisun tammi-/helmikuun 2025 numerossa kerrottiin uutuustuotteen vakuuttavan in vitro -suorituskyvyn tuoneen sille arvostetun Research Award -palkinnon.

OMINAISUUDET PÄHKINÄNKUORESSA

 
Intuitiivisen sävyjen valinnan lisäksi juoksevalla yhdistelmämuovilla on toinenkin merkittävä etu: se on tavattoman kestävää. CLEARFIL MAJESTY™ ES Flow Universal -materiaalin (Super Low) taivutuslujuus on 152 MPa ja puristuslujuus 374 MPa, eli se on yhtä kestävää kuin monet tahnamaiset yhdistelmämuovit. Näin ollen se soveltuu myös rasituksen alaisille alueille, ja sen käyttökohteita ovat:

• kaikkien täyteluokkien suorat restauraatiot, hammaskaulan alueen leesiot (esim. juuren pinnan karies, V:n muotoiset leesiot), hampaiden kuluminen ja eroosio
• kaviteetin pohja/eristysaine
• hampaan asennon ja muodon korjaaminen (esim. hampaiden välisen raon sulkeminen, epämuodostumien korjaus)
• lohjenneiden täytteiden intraoraalinen korjaus
• alle 2 mm:n paksuisten keraamisenten tai yhdistelmämuovista valmistettujen inlay- ja onlay-täytteiden sekä laminaattien sementointi.

HÄIKÄISEVÄ IN VITRO SUORITUSKYKY

Dental Advisor Biomaterials Research Center testasi Yhdysvalloissa saatavilla olevan Super Low -juoksevuustason ja vertasi sitä kahteen toiseen juoksevaan flow-yhdistelmämuoviin. Vertailtuja ominaisuuksia olivat materiaalien taivutuslujuus, kimmokerroin, murtolujuus, puristuslujuus ja röntgenpositiivisuus. Lisäksi tutkijat arvioivat materiaalien sävyvalikoiman kattavuutta ja täsmäävyyttä tekemällä V-luokan restauraation A1-, B2-, C3- ja D4-sävyisiin proteesihampaisiin. Lopuksi testattiin röntgenpositiivisuus ja juoksevuus.

 CLEARFIL MAJESTY™ ES Flow Universal suoriutui hyvin kaikilla osa-alueilla. Sen fyysiset ominaisuudet olivat juoksevien flow-yhdistelmämuovien parhaimmistoa ja vastaavalla tasolla kuin tahnamaisten materiaalien ominaisuudet. Röntgenpositiivisuus oli ihanteellinen, samoin juoksevuusaste, koska materiaali säilyttää muotonsa levityksen jälkeen. Vaikka tarjolla on vain kaksi sävyä, tutkijat vahvistivat, että CLEARFIL MAJESTY™ ES Flow Universal täsmää monipuolisesti erilaisiin luonnollisiin hammassävyihin.

TIETOJA DENTAL ADVISORISTA

PANAVIA™ Veneer LC WINS PREFERRED PRODUCT AND RESEARCH AWARDS

PANAVIA™ Veneer LC has been singled out for a Research Award in the category Research – Veneer Cement by Dental Advisor and for a Preferred Product Award in the category Cement: Esthetic Resin. Published in the January/February 2025 issue of the US-based organisation, the annual Top Product, Preferred Product or Research Awards are given to those materials and devices deemed by the publication’s consultants to deliver the best practice-based or lab-based performance in their categories.

BENEFITS IN A NUTSHELL

PANAVIA™ Veneer LC is a specialized veneer cement designed to provide exceptional bond strength to various substrates, along with outstanding gloss retention and wear resistance. The resin cement utilizes smaller-diameter spherical filler particles, facilitating easy dispensing from the syringe and excellent flowability for minimal film thickness. All of these attributes contribute to virtually no change in gloss or surface appearance of veneer margins over time.

EXCELLENT PROPERTIES IN VITRO

To assess the scientific performance of PANAVIA™ Veneer LC, its features and physical properties, specifically its bond strength to various substrates after artificial aging and its wear resistance, were tested in the Dental Advisor Biomaterials Research Center. The investigators’ testing of these attributes reflects the challenges such products must meet – “Ideally, esthetic veneer cements should have a long working time, curing on demand, excellent color stability, and high strength”.

To assess bond strength to dentin, enamel, IPS e.max CAD, and zirconia, the cements were subjected to six months of artificial aging using thermocycling. To test wear resistance after toothbrush abrasion, the testing method involved measuring depth of wear, change in surface roughness, and change in gloss based on a simulation of about 5.5 years of regular toothbrush use.

The investigators reported that PANAVIA™ Veneer LC “had the best gloss retention of the three cements tested and a very even wear pattern,” noting further that “having limited surface roughness after toothbrush abrasion can help lower staining and bacterial adhesion.” Overall, they said, “The PANAVIA™ Veneer LC cement system showed excellent adhesion properties and exceptional gloss retention and wear resistance,” concluding:

OUTSTANDING RATING OF 96 PERCENT

In addition, the product was tested in the clinical setting. 25 clinical evaluators used PANAVIA™ Veneer LC cement system in their dental offices. After a total of 166 uses, the light-curing resin cement received “excellent” to “very good” ratings with regard to completeness of the kit, the shade of the try-in pastes, ease of clean-up of the try-in pastes and excess cement, viscosity, working time and lack of shade shift after curing.

The evaluator’s clinical tips included:

• „Use a micro brush or rubber tip to clean up excess cement before curing.”
• „Apply glycerin gel to the margins after placing the veneer with the cement to eliminate the oxygen inhibition layer and ensure a complete cure before light curing through the gel.”

In their comments, they praised the ease of use of the system, the design of the syringes, the shade options and shade match between try-in and cement shades, e.g.:

• “The white shade of the cement was opaque enough for efficient masking of discolored tooth structure.”
• “Great esthetics, very easy to use, complete system.”

This resulted in an overall clinical rating of 96 percent and an equally high recommendation rate.

ABOUT DENTAL ADVISOR

The Top Product and Preferred Product Awards from Dental Advisor, a US-based organization, were initiated to help busy practitioners navigate the variety of new dental solutions available, particularly for less invasive techniques and standardized procedures. These awards aim to identify products that improve outcomes consistently. Dental Advisor conducts clinical evaluations and product performance tests shortly after a product’s launch and publishes annual results online to help practitioners identify high-quality dental materials suited to their specific needs. Research Awards were initiated to honour those manufacturers of dental products with an ongoing commitment to research, development and advancement of dental materials to enhance treatment quality.

For more information, visit Dental Advisor at: www.dentaladvisor.com