429 Too Many Requests

Five-time DENTAL ADVISOR Top Product delivers more than a reliable bond

For the fifth time CLEARFIL™ SE Protect has made DENTAL ADVISOR’S list of Top Products for 2023, placing it among dental materials and equipment deemed to deliver the best practice-based performance based on the publication’s annual review of such products.

Featured in the Bonding Agent Self-etch category, CLEARFIL™ SE Protect is a self-etch adhesive that offers more than just a reliable bond. It is:

• Antibacterial (self-etch) primer thanks to containing MDPB monomer
• Built on the same system of the gold standard adhesive CLEARFIL™ SE BOND
• Possible to use it for extended indications of core build-up and indirect restoration with CLEARIFL™ DC Activator.

All in all - surely a great addon to your dental toolbox.

Application of CLEARFIL SE Protect is also truly versatile – you can use it for any direct restorations, but in particular when treating hypersensitive teeth. It is also widely used for core build-up with self- or dual-cured resin materials and for cementation with composite resin cement in combination with CLEARFIL™ DC Activator.

CLEARFIL™ SE Protect offers you following features:

• Virtually no post-operative sensitivity
• Excellent bond strength for enamel and dentin
• Fast and simple procedure with low technique sensitivity

These attributes are reflected in the study findings and comments of the 13 DENTAL ADVISOR editors and consultants—seven of whom had previously used CLEARFIL™ SE BOND in their practices. After CLEARFIL™ SE Protect was assessed over a six-week period during which over 150 restorations were placed, it received a 98% clinical rating by consultants using a 1-5 rating scale,

The practitioners evaluating the product found no post-operative sensitivity. Among their observations mentioned in the online DENTAL ADVISOR report were the fact that the primer and bond wet the tooth evenly. They also mentioned that CLEARFIL™ SE BOND is effective in the reduction of sensitivity when placed on areas of recession or similar areas of sensitive tooth structure.

The Top Product or Preferred Product Awards conferred by US-based DENTAL ADVISOR were introduced to help busy practitioners make sense of the numerous new solutions indicated for less invasive techniques, standardized or simplified procedures, and better outcomes on a regular basis. DENTAL ADVISOR conducts its practice-based clinical evaluations and product performance tests shortly after product launch, and publishes results annually online to help potential users identify high-quality new dental materials and determine which among them are best suited to fulfill their individual requirements.

For more information visit the website of DENTAL ADVISOR: www.dentaladvisor.com

DENTAL ADVISOR Top Product to address everyday dental challenges

For the 8^th straight year, CLEARFIL MAJESTY™ ES Flow has been included among DENTAL ADVISOR’S Top Products, which is made up of dental materials and equipment deemed to deliver the best practice-based performance based on the publication’s annual review of such products.

Featured in the Direct Restorative category, CLEARFIL MAJESTY™ ES Flow comes in three different levels of flowability designed to cover a range of flowable composite indications that cannot be addressed with a single viscosity. Whether the practitioner needs the product to be firm enough to stay put where applied, malleable enough to create a specific shape, or runny enough to flow into every corner or undercut, one of the three versions is appropriate for the job. For example, the high flowability variant is the perfect choice for cavity linings and as a resin coat in immediate dentin sealing (IDS) procedures, while the super low flowability option is suitable for direct veneer procedures and for build-up of posterior cusps etc.

Equipped with Kuraray Noritake Dental Inc.’s Light Diffusion Technology, the universal flowable composite integrates seamlessly with the surrounding tooth structure. If no recontouring required, then a glossy surface can be obtained simply by wiping with a cotton roll soaked in alcohol.

The version tested by the 29 DENTAL ADVISOR consultants in more than 900 applications in their dental practices was the medium flowability variant (Low) of CLEARFIL MAJESTY™ ES Flow. They evaluated properties including placement/handling, aesthetics, viscosity, and polishability and rated all to be “excellent,” with no running during placement and a good adaptation to the cavity walls and when flowed into narrow areas. This led to a recommendation rate of 100 percent and a 98 percent overall clinical rating.

Among their comments were: “The material blended so well with the tooth structure that you had to look hard to find the interface;” “Syringe design prevents oozing from the tip;” and “Readily apparent on radiographs.”

The Top Product or Preferred Product Awards conferred by US-based DENTAL ADVISOR were introduced to help busy practitioners make sense of the numerous new solutions indicated for less invasive techniques, standardized or simplified procedures, and better outcomes on a regular basis. DENTAL ADVISOR conducts its practice-based clinical evaluations and product performance tests shortly after product launch. It publishes results annually online in its January/February issue to help potential users identify high-quality new dental materials and determine which among them are best suited to fulfill their individual requirements.

For more information visit the website of DENTAL ADVISOR: www.dentaladvisor.com.

The 46^th congress of European Prosthodontic Debates, also known as EPA2023, will take place in Vilnius, Lithuania 14-16^th of September, 2023.

It stands as a pinnacle gathering for dental professionals and researchers in the field of prosthodontics. This highly anticipated event serves as a platform to exchange knowledge, share insights, and engage in lively discussions on the latest advancements, achievements and challenges in prosthodontics.

EPA2023 promises to be an extraordinary occasion, attracting more than 50 experts from across Europe and beyond. Renowned speakers will present the newest advances in clinical prosthodontics and restorative dentistry. Daniele Rondoni, Matthias Kern, Nicola Scotti and Kazuyoshi Baba are only some of experts at the event; check out complete speaker line-up on the website www.epa2023.lt.

The event will feature thought-provoking debates, where experts will engage in intellectual discourse on current topics of prosthodontics, stimulating a lively exchange of ideas and perspectives. Special attention will be given to the successful application of digital solutions.

Beyond the scientific program, EPA2023 will provide ample opportunities for networking and collaboration. Attendees will have the chance to interact with colleagues, forge new partnerships, and establish connections with industry leaders, further enriching their professional networks.

As the European Prosthodontic Debates event continues to push the boundaries of prosthodontics, EPA2023 is expected to be a landmark occasion, empowering dental professionals to advance their knowledge, skills, and expertise in the ever-evolving field of prosthodontics.

Register now for EPA2023: www.epa2023.lt

Shortly before KATANA™ Zirconia ML was launched at the IDS in Cologne ten years ago, I had the pleasure to be invited to Japan. We visited the KATANA™ Zirconia production facilities and learned from Kazunobu Yamada and Takuro Nagura how the new material worked. So far, all dental zirconia I had used was white and quite opaque.

I was immediately impressed by the complexity of the production procedure including all the measures taken by Kuraray Noritake Dental to provide for an extremely high material and blank quality. The blanks appeared to have an extremely homogeneous multi-layered structure and a high density responsible for stable edges and smooth surfaces. What we were told in the manufacturing plant was confirmed by Kazunobu Yamada, who shared his experience and showed us several full-contour cases. I was pleasantly surprised by the fact that he was able to produce impressive outcomes without adding any colour. Moreover, Kazunobu Yamada was obviously able to polish the surface of his restorations within seconds. The perfectly smooth surface would allow us avoid the use of glaze, which usually wears off very quickly, leaving a potentially rough surface that may harm the antagonist.

Based on what I had learned in Japan, I went back to Italy and started experimenting with the amazing new material. While Kazunobu Yamada had identified KATANA™ Zirconia ML as the solution for monolithic restorations in the posterior area, I started using it in every region of the mouth – with different design concepts from full-contour to micro-cutback with micro-layering in the vestibular area. The occlusal contact area was always held in plain, polished zirconia.

Fig. 1. Early example of anterior restorations made of KATANA™ Zirconia ML individualized with CERABIEN™ ZR using the new micro-layering technique.

Fig. 2. Possible cutback design.

During the testing period, I learned a lot about the new zirconia, which was so different from earlier generations. The most important insight was that that the processing conditions have a huge impact on the final outcome. Kuraray Noritake Dental provided valuable support e.g. in the form of sintering protocols and processing and finishing recommendations. This helped me develop my own workflow and concept based on a full-contour design in the posterior and different micro-cutback options with micro-layering in the anterior region. For me, this is a perfect combination of the new type of zirconia (KATANA) and the traditional porcelain material (CERABIEN™ ZR Luster Porcelain and Internal Stain).

In May 2013, at a meeting of the Noritake Study Club in Florence, Italy, I presented the new approach for the first time. Many colleagues were enthusiastic about it and started adopting it. While further developments like more translucent (cubic) material variants and a new generation multi-layered zirconia with a flexural strength and translucency gradient increased the application options and aesthetic potential, micro-layering became a truly popular approach used by dental technicians all over the world. In 2016, it was recognized as a relevat workflow during a closed meeting of the European Academy of Aesthetic Dentistry.

Fig. 3. Perfectly polished palatal zirconia surfaces of anterior restorations.

Fig. 4. More recent case showing a patient who received restorations made of KATANA™ Zirconia STML …

Fig. 5. … finished with CERABIEN™ ZR Internal Stains and a micro-layer of CERABIEN™ Luster Porcelain LT1.

But what is the major reason for the success of the concept and of multi-layered zirconia with KATANA™ Zirconia ML as the pioneer? In my opinion, it should not be implemented for greater simplicity or economic reasons, as one might assume at first thought. The time saved in the layering procedure should be spent on other tasks such as surface texturing and a fine-tuning of the processing procedure. The real benefit is that KATANA™ Zirconia ML and its successors allow for better solutions adapted to the patient’s needs. First of all, they enable us to save natural tooth structure, as the required wall thickness is reduced. They also offer mechanical advantages, as chipping is avoided, and the occlusal contact area remains smooth over time. In my dental laboratory, we changed our workflows completely and – preferring a more conservative approach whenever indicated for the case on hand – we often abandon full layering.

KATANA™ Zirconia can be considered as a great contribution to the digital workflow in the dental laboratory and office, which increases the efficiency of prosthodontic procedures. With the KATANA™ Zirconia Multi-Layered series, it is easy to hold our promise of delivering the best possible quality and aesthetics. The reason is that the materials support us in an ideal way, delivering the perfect combination of tradition and innovation.

Some companies mainly make use of basic technologies developed by others to improve their products and introduce new ones, while other companies conduct fundamental research and technology development inhouse. Is this difference relevant for someone who uses the resulting products in the dental practice or laboratory on a daily basis? It is – as companies with a deep understanding of the underlying components, chemistry and technologies are able to solve existing problems and respond to market needs flexibly and quickly. This article describes the impact of several basic technologies developed by Kuraray Noritake Dental Inc. on the cementing of indirect restorations.

Adhesive cementation then and now

The possibility of milling dental restorations from different kinds of ceramics has opened up new opportunities in prosthodontics: highly aesthetic restorations can be produced and placed. What is often undervalued in this context is the role of adhesive cementation systems, which not only support the aesthetic appearance of the translucent, tooth-coloured restorations, but also pave the way for less invasive preparation and restoration designs. Early systems that provided for chemical adhesion between teeth and indirect restorations unfortunately offered a compromised long-term behaviour and high technique-sensitivity, while the application procedure was extremely complex. Technology development at Kuraray Noritake Dental Inc. made significant contributions to an improved long-term bonding performance of the systems and a simplified handling.

Optimizing the long-term bonding performance

In order to achieve long-term bonding of early cementation systems to tooth structure (especially dentin), Kuraray, a parent company of Kuraray Noritake Dental Inc., decided to focus on the development of a more powerful adhesive monomer in the 1970s. As a first step on its road to excellence, it introduced the phosphate monomer Phenyl-P in 1976. Five years later, continued efforts in improving and refining its molecular structure led to the introduction of the popular MDP Monomer that is capable of establishing a particularly strong and long-lasting bond to enamel, dentin, metal and zirconia.

The fact that it is still part of every adhesive and adhesive cementation system from Kuraray Noritake Dental Inc., and meanwhile also used by other manufacturers to optimize the bond strength and bond durability of their products, stresses the ingenuity of the invention. Compared to MDP synthesized elsewhere, the Original MDP Monomer from Kuraray Noritake Dental Inc. stands out due to an unmatched level of purity. Independent Studies show that this level of purity has a positive effect on its bonding behaviour¹. By offering stability in a moist environment, the MDP Monomer has contributed to a more consistent performance of the products containing it.

Different MDP Monomers offer different levels of purity and a different bonding performance.

Three experimental self-etch primers were prepared consisting of 15 wt.% 10-MDP provided by different sources: KN (Kuraray Noritake Dental), PCM (Germany) or DMI (Designer molecules Inc., USA). Data courtesy of Dr. Kumiko Yoshihara.

For adhesive resin cement systems to deliver a strong bond with an outstanding marginal seal, however, simply containing an adhesive monomer is not enough. Effective polymerization of this monomer is necessary as well – and not always that easily accomplished. In order to provide for an effective light-cure and dark-cure performance of PANAVIA™ V5, Kuraray Noritake Dental Inc. developed the Touch-Cure Technology. The key part of this technology is a newly developed, highly-active polymerisation accelerator in PANAVIA™ V5 Tooth Primer that is able to coexist with the acidic MDP Monomer promotes polymerisation starting from the interface between the tooth and the cement as soon as PANAVIA™ V5 Paste is applied to the already primed tooth surface. In PANAVIA™ Veneer LC – a light-curing resin cement system that works with the same primers – the polymerisation accelerator in PANAVIA™ V5 Tooth Primer shows the same mechanism of action. It contributes to the polymerization of the adhesive interface, while PANAVIA™ Veneer LC Paste offers excellent ambient light stability and is polymerized by light curing.

For example, this phenomenon was evaluated for PANAVIA™ F2.0, the predecessor of PANAVIA™ V5. The result of the study: PANAVIA™ F2.0 showed much better marginal sealing properties than other cement systems evaluated². This documented secure sealing of the interface leads to a lower incidence of marginal leakage, to a very high polymerisation ratio even in the self-cure mode (without light curing or wherever the light is blocked by the restorative material) and hence to a particularly strong bond.

An additional benefit arising from the incorporation of the polymerisation accelerator is its function as a strong reductant. It neutralizes sodium hypochlorite, which is commonly used as an irrigation solution during endodontic treatment, and thus eliminates its negative effect on the bond strength of the subsequently applied cement paste.

A highly active polymerisation accelerator in PANAVIA™ V5 Tooth Primer promotes effective polymerisation of the cement at the adhesive interface.

Simplifying glass-ceramic cementation

Fewer bottles, fewer steps and streamlined cementation procedures: that is why self-adhesive resin cements have been developed and introduced in the early 2000s. Most of these products, however, have a limited indication range. They work well on zirconia, metal, enamel and dentin, but are either not recommended or need an extra silane primer for glass-ceramic bonding. The MDP-containing PANAVIA™ SA Cement Universal is different due to another proprietary technology from Kuraray Noritake Dental Inc.: the LCSi Monomer, a Long Carbon-chain Silane coupling agent. This monomer forms a strong chemical bond with resin composite, porcelain and silica-type ceramics (like lithium disilicate), so that the need for a separate silane component (a primer or adhesive) is eliminated. By leveraging the benefits of this technology, PANAVIA™ SA Cement Universal clearly sets itself apart from other self-adhesive resin cements as a true single-component cementation system even for restorations made of glass ceramics.

If desired, the product’s bond strength to tooth structure can be increased by use of the popular universal adhesive CLEARFIL™ Universal Bond Quick featuring Rapid Bond Technology. This technology has been developed by Kuraray Noritake Dental Inc. to solve problems related to the slow penetration of tooth structure, especially wet dentin, typical for universal adhesives. In order to provide proper penetration, these adhesives need to be actively rubbed into the tooth structure for a long time or users have to wait for some time before light-curing the layer. Consisting of the Original MDP monomer combined with hydrophilic amide monomers, the proprietary Rapid Bond Technology provides for a high affinity to water leading to a rapid and deep penetration of wet dentin. As a consequence, application times are shortened and handling is simplified without negatively affecting the bonding performance.

Conclusion

Technologies developed by Kuraray Noritake Dental Inc. have strongly contributed to an improved bonding performance of adhesive cementation systems and a truly universal use of self-adhesive resin cements. As a consequence, the company offers a streamlined portfolio of high-performance resin cements for every user, for the typical clinical situations. Fewer components and fewer steps are necessary and procedures simplified – for fewer errors and aesthetic restorations that last. Apart from the technology-related benefits, the products mentioned offer many additional beneficial features. A detailed description is found online at kuraraynoritake.eu.

References

1) Functional monomer impurity affects adhesive performance.; Yoshihara K, Nagaoka N, Okihara T, Kuroboshi M, Hayakawa S, Maruo Y, Nishigawa G, De Munck J, Yoshida Y, Van Meerbeek B. Dent Mater. 2015 Dec;31(12):1493-501.
2) Touch-Cure Polymerization at the Composite Cement-Dentin Interface.; Yoshihara K, Nagaoka N, Benino Y, Nakamura A, Hara T, Maruo Y, Yoshida Y, Van Meerbeek B.J Dent Res. 2021 Aug;100(9):935-94.

Interview with Yoshihisa Yamada
General Manager, Technology Division of Kuraray Noritake Dental Inc.

KATANA™ Zirconia ML was introduced ten years ago, at the IDS 2013 in Cologne, as the dental industry’s first zirconia product with a multi-layered colour structure. Since that event, KATANA™ Zirconia ML blanks have become very popular. Continued development efforts have led to the current line-up of multi-layered materials, KATANA™ Zirconia UTML, STML and HTML PLUS, and our latest product – KATANA™ Zirconia YML. Our new technology with colour, translucency and strength gradation is found in KATANA™ Zirconia YML.

Photo credits to MDT Giuliano Moustakis.

How important was the invention of the Kuraray Noritake Dental’s original multi-layered technology for the dental market?

Our impression is that the material has had a significant impact on the dental market. Being the first zirconia material with a multi-layered colour structure, KATANA™ Zirconia ML was our first product of its class to offer the properties needed for the efficient production of full-contour zirconia restorations with a natural look. Before its introduction, the “full-contour zirconia” concept had not been widely accepted due to the aesthetic properties of the zirconia materials available so far: Many of them lacked the desired level of translucency, while others needed to be treated with dyeing liquids or stains in a complex procedure to obtain a natural shade appearance. With the launch of multi-layered zirconia blanks, which successfully added natural colour gradation to the structure, aesthetic full-contour zirconia restorations started to become popular among dental technicians worldwide. The high potential of the technology was confirmed at the IDS 2013 show, when we saw not only end-users, but also engineers from competing companies come to look at this product.

4-layer colour structure of KATANA™ multi-layered discs.

Photo credits to MDT Daniele Rondoni.

What changes were driven forward by the introduction of KATANA™ Zirconia ML?

After the introduction of KATANA™ Zirconia ML, many companies started developing multi-layered zirconia discs, creating a new dental product category with an added technical and clinical value. We are convinced that the invention of Kuraray Noritake Dental has played a major role in the shift from zirconia exclusively used as a framework material to alternative approaches including full-contour zirconia restorations. If only monochromatic zirconia discs had been available, we imagine that an increased number of dental technicians would have embraced the concept of using liquid colourants to achieve a natural appearance of full-contour crowns and bridges. That would have prevented monolithic zirconia restorations from becoming as popular as they are today.

How did the KATANA™ Zirconia ML technology evolve over the past ten years?

Based on our unique core technology developed for inventing KATANA™ Zirconia ML, we have been continuing making efforts to create even better products. One of Kuraray Noritake Dental’s great strengths is its ability to develop all the raw materials for its zirconia products inhouse. This makes it possible for us to adjust the boundaries between the layers as inconspicuously as possible, even when discs consist of multiple layers. This enabled us to provide multi-layered discs with the required strength and aesthetic qualities, and with a stable, predictable shrinkage rate. In the past ten years, we have focused on adding new materials with different levels of translucency and strength to offer a portfolio that meets the demands of virtually every dental technician, practitioner and patient.

For example, the advent of KATANA™ Zirconia STML, which has even better aesthetic qualities than KATANA™ Zirconia ML, has made it possible to use it all by itself to create highly aesthetic restorations, with no need to characterize or individualize the restorations. Of course, if you use KATANA™ Zirconia Multi-Layered discs and treat the restorations with a surface staining agent, such as CERABIEN™ ZR FC Paste Stain, you can create even more aesthetic restorations in a shorter time.

What are the benefits of Kuraray Noritake Dental’s multi-layered technology, as compared with other manufacturer’s solutions?

KATANA™ Zirconia multi-layered discs offer the advantage of delivering the proper colour even when they are sintered at high speed. There are two reasons for this. First, we developed unique raw materials with suitable characteristics for high-speed firing. This allows the creation of restorations with the same strength, stability, and aesthetics to be achieved after both short- and long-time firing. The second reason is that we possess the technical know-how concerning excellent shading that Noritake Dental Supply, one of Kuraray Noritake Dental’s predecessors, cultivated during its many years spent developing ceramic materials. Noritake Co., Ltd., parent company of Noritake Dental Supply, is a long-established ceramic manufacturer that is famous for its tableware and other outstanding products. It is this background that allows us to properly control pigment coloration using our inorganic pigment know-how and to provide unique firing schedules. These two strengths enable us to bring unique advantages to our products. That is, they remain stable and retain appropriate colouration even under rapid firing schedules.

CERABIEN™ ZR FC Paste Stain being applied to KATANA™ Zirconia restoration.

Photo credits to MDT Roberto Rossi.

How did you manage to shorten the sintering times so significantly, resulting in your speedy sintering with uniform protocols?

When shorter sintering times became possible, Kuraray Noritake Dental recommended that KATANA™ Zirconia ML be sintered for seven hours. After that, when a new furnace claiming being capable of short-time firing was launched, we used it to fire KATANA™ Zirconia ML on a trial basis. We found, happily, that our zirconia material was uniquely compatible with rapid firing. This was the beginning of our full-fledged study of short-time firing of our zirconia material. You could say that we began investigating short-time firing almost by accident. Then, while developing KATANA™ Zirconia STML and KATANA™ Zirconia UTML, successors of KATANA™ Zirconia ML, we focused on incorporating short-time firing into their features and made various adjustments, finally achieving the optimal combination of factors for the successful short-time firing of zirconia.

What are the benefits of Kuraray Noritake Dental’s second-generation multi-layered technology, as compared with other manufacturer’s solutions?

One advantage of KATANA™ Zirconia YML is that it can be applied to treat a wider range of cases without complex limitations on position within the disc. The reason: it delivers this high level of aesthetics while still maintaining great strength. This advantage of being appropriate for a wider range of cases also simplifies inventory management. In addition, users benefit from our expertise in developing raw materials and reproducing colour with ceramics. This expertise enabled us to develop a zirconia product in which each layer has a different level of translucency, while great strength and admirable aesthetics are maintained throughout the whole blank.

The sintering recommendation is only a guideline; some adjustments may be required depending on each individual furnace. If the furnace cannot be set according to the 54- or 90-minute sintering schedule, speed sintering cannot be used.

* The restorations may be removed at 800°C or less depending on the circumstances.
** For the sintering schedule of KATANA™ Zirconia HT, please refer to the Handy Chart in product packaging.

Is it really possible to address every case using only KATANA™ Zirconia YML?

For every case that can be treated either with KATANA™ Zirconia STML, KATANA™ Zirconia UTML, or KATANA™ Zirconia HTML PLUS, KATANA™ Zirconia YML is also an option. Hence, it is possible to use only KATANA™ Zirconia YML for all your zirconia cases – which is probably one of the reasons for its great popularity. It features both great strength and excellent aesthetics, and – being so versatile – it helps simplify inventory management. Of course, Kuraray Noritake Dental’s other multi-layered materials feature outstanding properties as well. Depending on the features you need, it would also be an option to select from these products - KATANA™ Zirconia STML, KATANA™ Zirconia UTML, or KATANA™ Zirconia HTML PLUS – to realize your ideal restorations.

KATANA™ Zirconia YML, finished with CERABIEN™ ZR.

Photo credits to MDT Giuliano Moustakis.

Why is the KATANA™ brand in general so popular among dental technicians around the world?

We think that dental technicians choose KATANA™ because they find that they can create highly aesthetic restorations using simple, straightforward steps.

Is there any further development potential in multi-layered technology?

On the basis of our technical know-how, there is always room for improvement. That is why we never stop innovating and listening to the voice of our customers. Developing what supports them in improving their outcomes while providing for more predictable, less stressful procedures is our ultimate goal. Right now, we expect to develop products with even greater strength, increased translucency, and outstanding aesthetics that will have a natural look resembling real teeth, even when the material used is full-contour zirconia.

Dentist:

YOSHIHISA YAMADA

We are thrilled to share with you our latest brochure – KATANA Zirconia Restoration System, featuring Kuraray Noritake Dental Inc’s product line-up that is dedicated to creating true-to-live restorations.

The KATANA Zirconia Family brochure features a range of lab-side products that are designed to meet the needs of modern dental professionals.

Our zirconia materials offer excellent strength and aesthetics, making them a top choice for prosthetic dentistry. In the new KATANA Zirconia Family brochure, you can read detailed information, key technical parameters, and suggested indication ranges for all our zirconia products - KATANA Zirconia UTML, STML, HTML PLUS, YML and HT. Also, we look at other products from our range such as CERABIEN ZR Porcelain, FC Paste Stain and  Esthetic Colorant that are and excellent choice for characterization of zirconia restorations, provide an overview of the sintering programs of KATANA Zirconia multi-layered discs and offer useful tips and tricks on how to best handle our zirconia.

With the KATANA Zirconia Family brochure, you will have all the basic information you need to make informed decisions about materials suitable for your dental lab.

Have a read, learn more and stay up to date!

“Very nice handling properties”

PAVANIA™ Veneer LC receives 4.6 rating in REALITY’s Five Star Award

After a FirstLook evaluation published in May 2022, a team of evaluators from REALITY RATINGS & REVIEWS has thoroughly tested PANAVIA™ Veneer LC in the clinical practice environment – with great outcomes. The purely light-cured resin cement received 4.6 out of 5 stars in the Five Star Award, the most convincing features being its handling and viscosity.

While most of the evaluators used PANAVIA™ Veneer LC for the permanent cementation of veneers, some also tested the onlay indication (restricted to high-translucency materials of a material-specific maximum thickness). Those who decided to polish the margins (43 %) found that the resin cement is very well polishable with little effort. Among the handling properties highlighted were easy seating with virtually no drifting, non-stickiness and easy excess removal – both after tack curing and in the cement’s uncured state. In addition, the evaluators praised the minimal film thickness and favourable viscosity, which has a considerable impact on the ease of seating. The working time was sufficient for all evaluators, independent of their way of working (filtering/blocking dental unit light or not, placing multiple veneers simultaneously or one veneer at a time).

The shade offering – PANAVIA™ Veneer LC is available in the four shades Clear, Universal/A2, Brown/A4 and White – was regarded adequate by most evaluators (79 %), the most popular shade being Clear. One evaluator stated that “I think the “clear” shade is my new favorite. It seems to have a brightness to it compared to other clear or translucent cements.”. Being the only shade with a high opacity, White was found to have a decisive impact on the appearance of the final restoration. The try-in pastes were well-received for their handling and easy rinse-off ability.

The PANAVIA™ Veneer LC kit available in Europe consists of PANAVIA™ Veneer LC Paste, PANAVIA™ V5 Tooth Primer and CLEARFIL™ CERAMIC PRIMER PLUS. Hence, it builds confidence by sharing primers with the proven PANAVIA™ V5, while its long working time and specific handling properties add extra benefits that are extremely valuable during veneer cementation. Click here to read the full evaluation!

According to Koelnmesse, 120,000 visitors from 162 countries attended the 40th International Dental Show between March 14 and 18, 2023. Being one of the 1,788 companies from 60 countries exhibiting at the show, the Kuraray Noritake Dental Inc. team enjoyed being back on-site, and seized every opportunity to connect with end-users of their products in person again. About 60 percent of the visitors and 75 percent of the exhibitors came from abroad. A highly international, euphoric atmosphere and lots of positive feedback on innovations confirmed that the team is on the right track in developing solutions that support users in improving the lives of their patients. However, the visiting dental professionals were not only interested in products for the dental office and laboratory, but also in smart techniques and approaches for their productive use – presented by renowned experts in lectures and hands-on demonstrations.

Laboratory solutions: The professionals were particularly interested in the brand-new Esthetic Colorant and the whole KATANA™ Zirconia Multi-Layered Series.

Hands-on demonstration of MDT Giuliano Moustakis: Zero Bake Technique with Esthetic Colorant and CERABIEN™ ZR FC Paste Stain.

MDT Nondas Vlachopoulos revealing how to obtain aesthetic outcomes with the One-Bake Technique.

Micro-layering with MDT Daniele Rondoni.

A roadmap to white-pink aesthetics shared by MDT Andreas Chatzimpatzakis.

MDT Alek Aronin describing a handcraft approach to highly aesthetic outcomes.

Indirect workflow solutions: PANAVIA™ Cements meeting every need.

Universal Excellence: CLEARFIL MAJESTY™ ES-2 Universal put to a test.

Handling test with direct restorative materials.

Demonstration of the flowable injection technique by Dr Michał Jaczewski.

Dr José Ignacio Zorzin shedding light on how to achieve reliable adhesion with universal products.

CEREC tips and tricks from MUDr Josef Kunkela, PhD.

Looking forward to seeing you at the next International Dental Show in Cologne in 2025 or elsewhere: The Kuraray Noritake Dental team!

Stratos Chatzichristos just tested the brand-new Esthetic Colorant on restorations made of KATANA™ Zirconia. This is his verdict:

“For me, KATANA™ Zirconia plus Esthetic Colorant is a true killer combination that leaves nothing to be desired. I love to apply the dyeing liquids to my monolithic zirconia restorations to intensify characteristic features and create natural shade effects. Usually, those restorations just need a final layer of glaze to look amazing!”

Every tooth has its unique internal shade structure. With its unique raw materials and colour structure, and specifically developed for the “KATANA ™ Zirconia” Multi-Layered series, Esthetic Colorant enables you to easily and efficiently imitate a variety of these unique characteristics.

The liquids are simply applied to the monolithic or anatomical restoration after milling using ametal-free brush or brush pen, preferably with a Liquid Brush Pen. The Esthetic Colorant diffuses into the pre-sintered structure and is fixed during sintering with no additional baking, resulting in lifelike shade effects shining from the inside of the restoration.

Would you like to know more about how to use our Esthetic Colorant, watch the video now: