429 Too Many Requests

Case by Dr. Vincenzo Picciariello

Innovative single-shade composites are an attractive option at least for posterior restorations, as they allow clinicians to skip laborious steps and save time. Nevertheless, the aesthetic and functional demands are high. The following case example demonstrates how CLEARFIL MAJESTY™ ES-2 Universal performs in the clinical environment and reveals how well the material blends in with surrounding tooth structure.

A 33-year-old female patient came to the clinic with a request to replace amalgam restorations in the upper right quadrant (Fig. 1). The second molar had an occlusal carious lesion, while the amalgam restoration on the first molar showed marginal leakage most likely leading to secondary caries. After the placement of rubber dam (Fig. 2), the existing restorations were removed, revealing secondary caries in the first molar and the second premolar (Fig. 3). The cavities were finished using fine-grained diamond burrs and sonic instruments and subsequently sandblasted with 50-micron aluminium oxide in order to facilitate the adhesive procedures (Fig. 4). In this way, the surface energy, bonding surface area, and surface roughness are increased and the wetting ability of the adhesive is improved for a high-quality bond with the enamel and dentin.

Fig. 1. Pre-operative image.

Fig. 2. Isolation of the working field with rubber dam.

Fig. 3. Secondary caries visible after removal of the amalgam restorations.

Fig. 4. Completed cavity preparation with air-abraded bonding surfaces.

Wooden wedges, sectional matrices and relative separator rings were placed to transform the Class II MOD cavity of the first molar into a Class I cavity by means of the centripetal build-up technique (Fig. 5). On each tooth, selective etching of the enamel was performed with 35% phosphoric acid etching gel (K-ETCHANT Syringe, Kuraray Noritake Dental Inc.), which was removed by thorough rinsing and drying, before applying the two components of CLEARFIL™ SE BOND – the self-etching primer and the light-curing bonding agent. The bond was treated with a gentle stream of air to make a uniform surface and finally, the adhesive layer was light cured for 40 seconds. The procedure was completed with immediate dentin sealing using a flowable composite (CLEARFIL MAJESTY™ ES-FLOW Low in the shade A3) in controlled thicknesses.

The restoration of the cavities was completed using CLEARFIL MAJESTY™ ES-2 Universal (Kuraray Noritake Dental Inc.) in the only available posterior shade Universal. In order to characterize the fissures and enhance the appearance of the occlusal morphology, staining agent in the shade dark-brown was applied. CLEARFIL™ Twist DIA (Kuraray Noritake Dental Inc.) was the polishing system of choice. After polishing, the difference in colour between the restorations and the visibly dehydrated enamel surfaces could be observed (Fig. 6). Upon inspection after 30 days, the restorations showed adequate and satisfactory chromatic integration (Fig. 7).

Fig. 5. Wedges, sectional matrices and rings placed for build-up of the first molar’s proximal walls.

Fig. 6. Image taken immediately after polishing with dehydrated enamel and the rubber dam still in place.

FINAL SITUATION

Fig. 7. Picture of the treatment outcome taken after 30 days.

The treatment of this quadrant demonstrates how CLEARFIL MAJESTY™ ES-2 Universal composite is an integrative innovation to the Kuraray Noritake Dental Inc. line of composites that allows the clinician to simplify the modeling procedures for direct restorations in the posterior regions, obtaining excellent aesthetic and functional results.

Dentist:

DR. VINCENZO PICCIARIELLO

Graduated from the faculty of dentistry and dental prostheses of Bari in 2009; specialized in direct and indirect conservative dentistry. Completed his training in aesthetic adhesive restorative dentistry in Geneva by attending the Anterior Bio-Esthetic Restorations Master Program of Dr. Didier Dietschi. He perfected himself under the guidance of Dr. Salvatore Scolavino and Dr. Gaetano Paolone at WeRestore in Rome. Member of the Italian Academy of Conservative Dentistry. Author of national and international publications.

Speaker at national and international conferences on adhesive dentistry topics. Since 2009, he has been working as a freelancer in Bitonto, dedicating himself mainly to implant and periodontal surgery and to adhesive aesthetic restorative-prosthetic dentistry.

Case by Dr. Daniele Rondoni, RDT

Check out how beautiful zirconia restorations are finalized using CERABIEN™ ZR FC Paste Stain, take a look at the color palette used by Dr. Daniele Rondoni to achieve outstanding aesthetic results.

“CERABIEN™ ZR Paste Stain is a material developed for micro-layering on the full-contour zirconia surface. With it, natural, true-to-life optical effects are created in an efficient way. I apply the pastes in the esthetic areas, while the functional parts of the restorations are only polished.”

Dentist:

DR. DANIELE RONDONI, RDT

Born in Savona in 1961 where he lives and has worked in his own laboratory since 1982 with his collaborators. Graduated from the dental technician school IPSIA “P. Gaslini” in Genoa in 1979. He continued his education by attending relevant workshops for the “Italian dental school“ and broadened his professional experience in Switzerland, Germany and Japan. Since 2011 Kuraray Noritake Dental International Instructor.

Fig. 1. Initial situation: caries lesions and insufficient restorations are detected on the occlusal surface of the second molar.

Fig. 2. Situation after placement of rubber dam for moisture control.

Fig. 3. Appearance of the teeth following caries removal and placement of sectional matrix.

Fig. 4. Etch-and-Rinse technique (Enamel for 30 sec. and Dentin for 15 sec.).

Fig. 5. Situation after rinsing. Etch patterns are visible in the enamel.

Fig. 6. Appearance of the teeth following application of CLEARFIL™ Universal Bond Quick.

Fig. 7. Cavity lining with a layer of flowable composite (CLEARFIL MAJESTY™ ES-Flow Low, A2).

Fig. 8. Occlusal view of the final restorations produced with CLEARFIL MAJESTY™ ES-2 Universal (U shade).

Fig. 9. Situation after rubber dam removal and occlusal adjustments.

FINAL SITUATION

Fig. 10. Follow-up after 7 days.

Case by Francesco Ferretti and Marco Nicastro

Aesthetic restoration of anterior teeth using KATANA™ UTML Full anatomical crowns, with vestibular stratification and BOPT*¹.

^{*1 Biologically Oriented Preparation Technique}

Initial situation

Final result

Shows excellent aesthetic properties of KATANA™ UTML and the perfect integration in harmony with pink tissues.

Figure 1. The patient requested a solution for an aesthetic problem due to unnatural look of old restorations and black triangles coming from past history of periodontitis. The resulting retraction of the tissues had left the margins of the prosthesis clearly visible, and the loss of the papilla peaks, together with the numerous black spaces between the crowns, required a complex therapeutic approach.

Figure 2. The treatment plan for the periodontal problems con-sisted of a non-surgical approach, with scaling and root planing, and the replacement of the previously fixed prostheses to recondition the marginal tissues and facilitate the restoration of a new, aesthetically pleasing gingival architecture.

Figure 3. From a functional point of view, we decided to reduce the deep frontal bite to restore a correct overjet-overbite ratio. This reduction was also important from an aesthetic point of view, as it allowed us to shape the various elements correctly.

Figure 4. We usually remove old prostheses before beginning a periodontal treatment, and make a first, provisional restoration to create an environment in which the soft tissues can heal. If we have to work beyond the cement enamel joint (CEJ), we prefer a vertical preparation for posts, and the purpose of the provisional restoration is to condition the marginal tissues using Dr. Loi’s BOPT.

Figure 5. For the BOPT, the vertical preparation of the post has a finish line that extends inside the gingival sulcus. The temporary conditioning of the tissues induced by the provisional prosthesis allows us to modify the level of the gingival parables to a certain extent.

Figure 6. The image on the left shows the clinical healing of the tissues one month after the initial periodontal treatment. The role of the provisional restoration, appropriately realigned, is clear. The conditioning of the tissue has been achieved by means of the provisional restoration, which has modified the level and shape of the marginal tissue. Once filled with correctly fitted crowns, the interproximal spaces will be further reduced after the definitive restoration.

Figure 7. The correct management of the provisional restoration is crucial for the healing of the tissues. The placement of a provisional restoration before the periodontal therapy has allowed us to create the right environment for complete healing. At the same time, the vertical preparation has allowed us to gradually condition the marginal gingival tissue by shortening or lengthening the provisional restoration as necessary.

Figure 8. One of the advantages of a vertical preparation is that taking the final impression is easy, because the absence of a horizontal finish line greatly simplifies the procedure. On the other hand, the BOPT also requires the taking of an impression of the sub-gingival portion of the preparation. The dental technician will have to decide marginal shape of restorations according to the position of the gingival line in consultation of the clinician, and based on the tests conducted with the provisional restoration.

Figure 9. After the casting of the model, we prepared the gingival area to accommodate an ideal configuration of gingival parables.

Figure 10. After making a wax model, we assessed whether the height of the gingival zenith level could be further corrected. This photo shows that gingival level of 21 was not yet ideal, so we stretched it distally.

Figure 11. Once the wax model was complete, we extracted the element from the model and evaluated its protrusion. It was only after joining the gingival protrusion to the arbitrary margin of the preparation that we proceeded to a scan and milled the crowns.

Figure 12. The restoration was carried out with Katana™ UTML zirconia based on the new formulation of cubic zirconium oxide. This ultra tralucent material was chosen because we were working with light and non-discolored posts.

Figure 13. We finished the crowns on a positional impression to help to improve the gingival adaptation; we had some dispersion of the tissues in the first precision impression due to the use of retractors. We finished the crowns with CZR FC Paste Stain colours and glaze.

Figure 14. The surface colours and the slight contrast created are highlighted in this black-and-white image taken with a blue filter.

Figure 15. In this translucent image, we can see the natural translucent effect of KATANA™ UTML and invisible fusion between abutments and crowns.

Figure 16. Clinical image one year after cementation made with PANAVIA V5; this shows the good clinical condition of the marginal tissue, with no signs of inflammation or bleeding. The BOPT allowed us to optimise the level of the gingiva without resorting to periodontal surgery, while the shape of the new crowns has made it possible to close all interproximal spaces for an optimally aesthetic result.

Figure 17. The brightness of the restorations (thanks to the use of a particularly translucent zirconia) combined with the shape of the incisors, has greatly im-proved the aesthetic of the restoration, even though the condition initially appeared to be particularly unfavourable.

Figure 18. Compared to the previous prostheses, the incisal reduction allowed not only for the optimisation of the functional phase by reducing the overbite, but also made it possible to achieve a more natural aesthetic, with the contour of the incisal margins following that of the lower lip.

Dentists:

FRANCESCO FERRETTI

Born in Rome on 15th March 1957, Francesco Ferretti gets his degree as dental technician at the Institute “Edmondo de Amicis”, in Rome. In 1980, he starts working and, from 1987 to 1994, he cooperates with IVOCLAR VIVADENT giving consulting as ceramist. In 1992 he starts working exclusively with Prof. Mario MARTIGNONI.

• After one year cooperation with Prof. Martignoni, he starts working with the ORAL DESIGN CENTER founded in Rome by Mr. Willi Geller, and becomes a partner, improving prosthesis esthetics.
• Is registered outside the course of dentistry at the University of Rome Tor Vergata.
• In 2001, he founds ESTECH DENTAL STUDIOS, in cooperation with Pentron for technical training and consulting.
• He has published articles and studies in Italian and American magazines. He is interested in Metal Free techniques.
• Winner of the 2004 Polcan Aiop.
• He is a member of: ANTLO LAZIO ( National Association of Lab Owners) with the president of the Lazio region 2013-2014.
• National cultural manager ANTLO 2017-2020.
• Teacher of prosthetics perfectioning at the University of Chieti for the year 2002, he has been re-confirmed for the year 2003, 2004, 2005 to deal with Metal Free.
• Teacher of prosthetics perfectioning at the University of Naples 2006.
• He has participated as a speaker at numerous conferences in Italy. ESCD member has participated as a speaker at ten in Florence 2009 and Turin 2013.

MARCO NICASTRO

Marco Nicastro takes a degree in “Odontoiatria e Protesi Dentaria (Dentistry and Dental Prosthesis) at the University of Rome “ La Sapienza in 1989. Since the beginning he is interested in prosthesis restoration dentistry and aesthetic problems.

• From 1990 to 1996 he attends Prof. Martignoni’s studio, where he develops his prosthesis knowledge.
• From 1993 to 1998 he cooperates as lecturer with the Oral Design Centre in Rome, directed by Mr. Ferretti and Mr. Felli, giving lectures and courses about aesthetic restoration either in Italy or in foreign countries. In the same period he enlarges his experience in aesthetics, attending training courses at the University of Geneva, in Switzerland.
• Since 1993 he has been cooperating with Mr. Francesco Ferretti in the organization of Courses and Conferences, paying particular attention to metal free methodology.
• Vice President of the European Society of Cosmetic Dentistry (ESCD).
• Founding member and active member of Gimnasium interdisciplinary CAD-CAM (GICC).
• Active member of the Italian Society of Conservative Dentistry (SIDOC).
• Partner of the Italian Academy of Prosthetic Dentistry (AIOP).
• President of Like Mine Dental Education in Rome since 2001.
• He won, with Francesco Ferretti, the Polcan award of the Italian Accademy of Prosthetic Dentistry in 2004.

Case by Aleksandra Łyżwińska, DMD

This clinical case concerns a patient with a lesion on the occluso-distal aspect of the mandibular left first premolar. We opted for a direct treatment approach with a combination of flowable and high-viscosity composite resin (CLEARFIL MAJESTY™ ES Flow - Super Low A2, CLEARFIL MAJESTY™ ES-2 Classic A2). In order to establish a strong bond between the tooth structure and the restorative material, we decided to selectively etch the enamel and then apply a clinically proven self-etch adhesive (CLEARFIL™ SE BOND 2).

Fig. 1. Initial clinical situation.

Fig. 2. Appearance of the premolar after caries removal.

Fig. 3. Placement of a sectional matrix for anatomical shaping, the establishing of tight interproximal contacts and protection of the adjacent tooth.

Fig. 4. Appearance of the tooth structure after selective enamel etching.

Fig. 5. Interproximal wall built up with CLEARFIL MAJESTY™ ES-2 Classic (A2 shade) and cavity filled with CLEARFIL MAJESTY™ ES Flow - Super Low A2.

Fig. 6. After initial polishing.

FINAL SITUATION

Fig. 7. Occlusal view of the treatment outcome after finishing and polishing.

Fig. 8. Follow up after 1 week.

Dentist:

ALEKSANDRA ŁYŻWIŃSKA
Warsaw, Poland

Aleksandra Łyżwińska, DMD, is a passionate aesthetic and adhesive dentist. Driven by Evidence Based Dentistry, her goal includes using modern composite materials and bonding agents in her clinical practise. In addition to her primary job, she worked as a lecturer and an assistant professor at the Department of Conservative Dentistry and Endodontics of Medical University of Warsaw, her alma mater.

Case by Dr. Michał Pokojski

Universal resin composites with a simplified shade concept are popular as they streamline direct restoration procedures. Unfortunately, many of the available products that claim to blend in well with the surrounding tooth structure independent of its shade need a blocker or opaquer to mask dark areas. According to Kuraray Noritake Dental, CLEARFIL MAJESTY™ ES-2 Universal is different. This is why I decided to test its Universal shade (U) designed for all kinds of restorations in the posterior region in the context of replacing an amalgam restoration.

The restoration that needed to be replaced due to secondary caries was located in the maxillary molar region of a male patient. As usual under amalgam restorations, the remaining healthy tooth structure showed some discolouration. The cavity was prepared, the enamel etched and the whole bonding surface treated with CLEARFIL™ SE Bond. Subsequently, the restoration was built up using CLEARFIL MAJESTY™ ES-2 Universal in several layers. For a natural appearance, some brown tint was added to the fissures before finishing and polishing. The restoration shows a natural integration into the surrounding structure and is able to mask the discolouration on the cavity floor.

Fig. 1. Pre-operative image showing the amalgam restorations to be replaced.

Fig. 2. Appearance of the tooth after removal of the amalgam, caries excavation and cavity preparation.

Fig. 3. Tooth built up with CLEARFIL MAJESTY™ ES-2 Universal (U shade).

FINAL SITUATION

Fig. 4. Immediate treatment outcome.

Dentist:

DR. MICHAŁ POKOJSKI

Dr. Michał Pokojski is a graduate of the Medical University of Łódź, Poland. He maintains his private practice in Starachowice, Świętokrzyskie Voivodeship. His passion is endodontics and esthetic conservative dentistry. In his everyday duties microscope and camera are his main tools to provide his patients with professional and precise procedures and to ensure proper level of communication and understanding. His practice was guided by EBD from the very beginning, because in his opinion knowledge, scientific facts and dedication for what you do are the fundamentals of medicine and dentistry as well. His goal is to treat patients at the highest level of quality using the best available materials, instruments and procedures. His cases are well-known in the world thanks to modern ways of communication like Facebook and Instagram.

Clinical case by Dr Salvatore Scolavino

This video illustrates the recontouring treatment with dental light-cured restorative composite CLEARFIL MAJESTY ES-2.

Dentist:

DR SALVATORE SCOLAVINO

• Specialist in Asthetic Dentistry from Naples, Italy
• Member of the Styleitaliano group which focuses on minimally invasive dentistry techniques
• Private practice in Nola (NA)
• Active member SIDOC (Italian Society of Conservative Dentistry), IAED (Italian Academy of Esthetic Dentistry)
• Author and co-author of scientific publications on national and international journals
• Lecturer in national and international congresses and events

Case by Dr Adrien Lavenant

Introduction

The patient consulted for a follow-up examination and presented with recurrent caries at the maxillary right first molar. A direct treatment with composite needed to be performed. We decided to use Kuraray Noritake Dental Inc.´s CLEARFIL MAJESTY™ ES-2 Universal composite for several reasons: the efficiency of the treatment, favourable handling properties and ease of use.

The clinical case illustrations below show the step-by-step approach carried out during a 30-minute treatment session.

Fig. 1. Initial situation showing an occlusal caries lesion on the maxillary right first molar.

Fig. 2. Pre-operative X-ray.

Fig. 3. Isolation of the working field with rubber dam.

Fig. 4. Situation after caries excavation and tissue preparation.

Fig. 5. Cavity ready for the application of the universal composite: CLEARFIL™ Universal Bond Quick is visible on dentin and enamel and the cavity floor is covered by a thin layer of CLEARFIL MAJESTY™ ES Flow Low.

Fig. 6. Appearance of the tooth after buildup of the restoration with several layers of CLEARFIL MAJESTY™ ES-2 Universal composite (in the shade U developed for the posterior area).

Fig. 7. Stains applied in the occlusal fissures ensure an even more natural appearance.

Fig. 8. Final result after polishing with CLEARFIL™ Twist DIA and checking of the occlusion.

Fig. 9. Final result immediately after rubber dam removal.

Fig. 10. Post-operative X-ray.

FINAL SITUATION

Fig. 11. Check-up after 15 days with rehydrated dental tissues.

Dentist:

DR ADRIEN LAVENANT

Dr Adrien Lavenant obtained his DDS degree at the University of Aix-Marseille in 2010. He pursued his post-graduate education in the field of periodontology, restorative and aesthetic dentistry (University Aix-Marseille and Paris).

Dr Lavenant is a former member of the teaching staff of the University of Aix-Marseille since 2011 and he continues to teach in the postgraduate program in restorative and aesthetic dentistry.

Since 2010, he owns a private practice in Aix-en-Provence specialised in restorative, prosthetic and aesthetic implant dentistry. He has been part of the international Bio-emulation group since 2019 and shares his philosophy of patient care in accordance with the principles of biomimetic dentistry.

Case by Dr. Max Andrup

This patient presented with a fractured amalgam restoration in the occlusal aspect of the mandibular right first molar. The cavity was shallow resulting in a very favourable C-factor. The C-factor describes the relationship between bonded and unbonded restorative material surfaces and is used as an indicator for polymerization shrinkage stress development in a cavity. Hence, it is essential to manage this factor when working with resin composites.

Fig. 1. Initial situation with the fractured amalgam restoration. In the distal aspect of the restoration, some recurrent decay is also visible.

Fig. 2. First molar ready for a new restoration after removal of the amalgam and bevelling of the enamel.

Fig. 3. Selective etching of the enamel prior to the application of CLEARFIL™ SE Protect into the cavity. Selective etching is performed in order to maximize the bond strength to enamel (by etching) and to dentin (without etching).

FINAL SITUATION

Fig. 4. Final situation after restoration of the cavity with CLEARFIL MAJESTY™ ES-2 Universal in the shade U developed for posterior restorations. The favourable C-factor and the fact that the polymerization shrinkage stress produced by the selected material is very low provide the conditions for a good long-term behaviour of the new restoration.

Dentist:

Dr. Max Andrup graduated from the University of Umeå in 2010 and today runs his private practice in the city of Hudiksvall, Sweden. He has a passion for restorative dentistry with a biomimetic approach.

Case by Dr. Michał Pokojski

When restoring primary carious lesions in the posterior area with composite, I wish to use a material that allows me to produce high-quality outcomes in an efficient procedure. The most important qualities of the restoration are its perfect marginal integrity and reliable long-term behaviour, which set the stage for a long and healthy life of the otherwise healthy tooth.

Reliability paired with ease of use is what I expected from the selected material combination: CLEARFIL™ SE Bond 2, a popular self-etch adhesive containing the original MDP monomer, and CLEARFIL MAJESTY™ ES-2 Universal. According to Kuraray Noritake Dental, the innovative resin composite comes with a universal shade concept and mechanical properties such as shrinkage, wear resistance and colour stability similar to those of proven CLEARFIL MAJESTY™ products. As a single shade is available for the posterior region, the need for shade determination is eliminated, which allows the dental practitioner to focus on the clinical work steps. In this case, a small primary defect in a third molar was restored. The outcome speaks for itself.

Fig. 1. Situation during cavity preparation revealing the carious lesion.

Fig. 2. Prepared cavity after the application of the bonding agent.

FINAL SITUATION

Fig. 3. Treatment outcome with the composite harmoniously integrated into the surrounding structure.

Dentist:

DR. MICHAŁ POKOJSKI

Dr. Michał Pokojski is a graduate of the Medical University of Łódź, Poland. He maintains his private practice in Starachowice, Świętokrzyskie Voivodeship. His passion is endodontics and esthetic conservative dentistry. In his everyday duties microscope and camera are his main tools to provide his patients with professional and precise procedures and to ensure proper level of communication and understanding. His practice was guided by EBD from the very beginning, because in his opinion knowledge, scientific facts and dedication for what you do are the fundamentals of medicine and dentistry as well. His goal is to treat patients at the highest level of quality using the best available materials, instruments and procedures. His cases are well-known in the world thanks to modern ways of communication like Facebook and Instagram.