Interview: Empower your dental lab

Interview with Mathias Fernandez Y Lombardi, EU Scientific Manager, Kuraray Europe GmbH

Kuraray Noritake Dental Inc. reinvented its original zirconia multi-layer technology by integrating newly developed raw materials with different yttria content into the proven multi-layer colour structure. The material that is based on this innovative technology, KATANA™ Zirconia YML, offers a well-balanced flexural strength, chroma and translucency gradation throughout the blank.

According to pilot users of the new zirconia discs, the greatest benefit of using KATANA™ Zirconia YML is in the true empowerment of the laboratory. We asked Kuraray Noritake’s EU Scientific Manager Dental Ceramics & CAD/CAM Materials, Mathias Fernandez Lombardi, to explain how the new material is able to positively affect work routines in the dental laboratory.

The greatest benefit of using KATANA™ Zirconia YML is in the true empowerment of the laboratory.

Mathias Fernandez Lombardi, who should consider working with KATANA™ Zirconia YML?

KATANA™ Zirconia YML is designed for laboratories and milling centres with a strong focus on simplification. With its strong body and highly translucent enamel layer, it offers exactly the properties required for an unlimited indication range. Being perfectly suited for the production of durable monolithic long-span posterior bridges and of highly aesthetic anterior crowns or partial restorations, KATANA™ Zirconia YML is a true all-rounder that eliminates the need for another zirconia or even ceramic CAD/CAM material. At the same time, it supports highly automated production procedures and requires minimal hand work.

What are the benefits of using a single material for every indication?

Several benefits are related to the use of a single, all-round material. It leads to a reduced number of blanks to be stored, which simplifies inventory management and minimizes the storage space needed. Moreover, it facilitates standardization of laboratory workflows. Using the same material every time means that there are no differences in the basic design and milling parameters like minimum wall thicknesses and connector strengths, in the sintering protocols and finishing options to be taken into account. Hence, errors are less likely to occur and routines are easily established. Finally, the risk of cross-contamination is eliminated when a single material is processed with the available equipment (milling machine, milling and finishing tools, and sintering furnace). Predictable outcomes and flawless aesthetics are usually the result.

What are the benefits related to the use of KATANA™ Zirconia YML as the only ceramic CAD/CAM material?

I guess that the most important argument is that aesthetic outcomes are easily and efficiently achieved with KATANA™ Zirconia YML for all kinds of restorations, even for long-span bridges. It is usually sufficient to produce monolithic restorations for the posterior region, which are just polished or glazed. Anterior restorations may be designed monolithically or with minimal cut-back, and the user may choose between CERABIEN™ ZR (CZR) FC Paste Stains and CZR Internal Stains plus glaze to obtain a natural look. Another benefit of KATANA™ Zirconia YML is its seamless multi-layer structure combined with an extraordinary blank quality.

Why is this seamless structure and high blank quality important for users?

The seamless multi-layer structure, that is a smooth transition from one layer to the next, is the precondition for structural integrity and flawless aesthetics. It ensures that the material is free of transition lines, offers accurate dimensions after sintering (due to uniform shrinkage) and shows a reliable long-term performance not compromised by internal tensions. In KATANA™ Zirconia YML, a completely homogeneous composition, with carefully aligned CTE-values and shrinkage ratios in all parts of the blank, is responsible for this benefit.

Aesthetic outcomes are easily and efficiently achieved with KATANA™ Zirconia YML for all kinds of restorations, even for long-span bridges.

For its development, Kuraray Noritake Dental leveraged its long-standing expertise in dental ceramics and the advantages of an end-to-end in-house blank production process, without which it would have been impossible to reach the requested quality level. Due to the fact that the material is so well aligned, it was even possible to develop a 54-minute sintering programme that produces equally good results as the proven 90-minute or 7-hour programmes and becomes the go-to option for all rush cases. With this feature, KATANA™ Zirconia YML becomes the “jack of all trades” material: It offers highest comfort and security like an SUV, but when it comes to speed, it is in no way inferior to a sports car.

The above sintering recommendations represent only a guideline; depending on each individual furnace and condition, some adjustments might be necessary. If the 54 or 90-minute sintering program is not programmable in your furnace, it is not possible to set the furnace according to one of these schedules. *The material is removed from the furnace at 8000C. A furnace with a configurable YML sintering program is required.

Users who have already tested ceramic materials with a strength gradient know that positioning of long-span restorations in the blank can be tricky. What are the rules to be respected when positioning a long-span bridge in a YML blank?

Positioning of restorations in KATANA™ Zirconia YML discs is extraordinarily easy. The reason is that the gap between the lowest flexural strength found in the enamel area and the highest flexural strength found in the lowest body layer is comparatively small. Moreover, the Body Layer 1 that is found adjacent to the enamel layer already offers a flexural strength that is higher than the 800 MPa requested for bridges with four or more units. Consequently, users are on the safe side whenever they place their long-span restorations in the middle of the blank. More specifically, half of the connector cross section needs to be in the lower half of the disc, which is quite different from other materials with strength gradation that allow for connector positioning in the body area only. KATANA™ Zirconia YML restorations with a maximum of three units may be positioned in any layer. In this context, the fact that the thickness of each layer increases proportionally with the height of the disc comes as a benefit: The enamel layer is large enough to exploit its aesthetic potential in single-unit or small bridge cases.

Positioning of long-span restorations in the middle of the disc.

What would you recommend dental technicians who would like to empower their laboratory or milling centre?

I can truly recommend testing KATANA™ Zirconia YML in the laboratory environment to see how it handles and to assess its potential. The exceptional blank quality and seamless integration of the different layers, the ease of positioning and processing efficiency are factors potential users need to experience in real life to understand what they mean for their daily work. Similarly, the aesthetic outcomes need to be assessed in the clinical environment for an authentic impression of the natural look and feel obtained. I am sure that KATANA™ Zirconia YML will be able to convince virtually everyone who wants to empower the laboratory with an easy-to-use, efficient universal zirconia solution that fits virtually every patient’s and every dentist’s needs! Kuraray Noritake Dental knows that dental technicians and practitioners are in need of products that support their striving for simplification, standardization and increased efficiency so urgently needed in present times. Therefore, our product innovations are all focused on delivering more performance with less effort. KATANA™ Zirconia YML is the latest addition to a whole series of materials pursuing this goal.

Minimum connector cross-sections are to be respected during the computer-aided design of KATANA™ Zirconia YML restorations.

Mathias Fernandez Y Lombardi

EU Scientific Manager
Dental Ceramics & CAD/CAM Materials
Kuraray Europe GmbH

2013
Successful completion of an apprenticeship as a dental technician at Seuthe dental laboratory in Plettenberg, Germany

2018
Successful completion of dental technology studies at the University of Osnabrück, Germany. Graduation as an engineer in dental technology

Since March 2018
Employee of Kuraray Europe GmbH

• Aug 24, 2021

KATANA Zirconia YML View Product