Case by Dr. Nicola Scotti

When restoring posterior teeth with resin composite, functional aspects such as tight and anatomically correct proximal contacts and a naturally shaped occlusal surface that is wear-resistant and antagonist-friendly are even more important than a perfect optical integration. This is why every dental practitioner should avoid spending a lot of time on shade selection in these cases and focus on the factors that have an impact on the reliability and longevity of the restoration. Great support in accomplishing this task is offered by CLEARFIL MAJESTY™ ES-2 Universal, a resin composite with a single universal shade (U) for the posterior region that eliminates the need for shade taking and selection. At the same time, it offers good marginal adaptation, low shrinkage stress and high wear resistance needed for great long-term results.

Fig. 1. Initial situation with a wide primary carious lesion in the distal aspect of the second premolar.

Fig. 2. Premolar after isolation of the working field with rubber dam, caries excavation and cavity preparation.

Fig. 3. Placement of a sectional matrix and a wedge to optimize the fit. Both are held in place with a separation ring, which increases the interproximal space and hence ensures tight, anatomically correct proximal contacts.

Fig. 4. Build-up of the proximal wall with CLEARFIL MAJESTY™ ES-2 Universal (U shade) following selective enamel etching with phosphoric acid (K-ETCHANT Syringe) and bonding with CLEARFIL™ SE Bond.

Fig. 5. A thin layer of flowable composite (CLEARFIL MAJESTY™ ES FLOW High) applied to the cavity floor to act as a resin coat.

Fig. 6. Restoration completed with CLEARFIL MAJESTY™ ES-2 Universal (U shade). While the universal shade composite blends in very well with the surrounding tooth structure, the natural look is completed by adding a tiny bit of brown tint to the fissure.

Fig. 7. Treatment outcome immediately after rubber dam removal. The proximal contact is tight and the occlusal anatomy well-shaped for the patient’s individual masticatory dynamics. The margin of the restoration is virtually invisible, while the buccal cusp appears lighter due to dehydration of the natural tooth structure.

FINAL SITUATION

Fig. 8. Treatment outcome after two months.

Conclusion

The present case demonstrates that the selected composite is well-suited for simplified restoration procedures in the posterior region. The material handles well, offers the same mechanical properties as other materials from the CLEARFIL MAJESTY™ ES-2 series and blends in harmoniously with the surrounding structures without being too translucent. This way, it is possible to waive the shade-taking process without compromising the treatment outcome. The time saved in this context may be spent on functional aspects – or even on another patient.

Dentist:

DR. NICOLA SCOTTI

Virtual Kick-Off KATANA Zirconia Symposium

Lecture 1 of 3, Prof. Dr. Beuer
Watch how Prof. Dr. Beuer explains his experience with the new material. Two in one: Combining High Strength and High Translucent Zirconia.

Lecture 2 of 3, MDT Rondoni + MDT Rossi
Watch the recording of the KATANA Zirconia YML Online Symposium on July 3rd 2021, the second lecture plus hand-on which details the experience of MDT Rondoni and MDT Rossi with this new material.

Lecture 3 of 3 + Q&A, MDT Nondas Vlachopoulos
Mister Vlachopoulos deepdives in to a full procedure executed with the new material and demonstrates how liquid ceramics compliment the material establishing a very high-end aesthetic result.

The KATANA™ Zirconia family of multi-layered CAD/CAM blanks has a new member: KATANA™ Zirconia YML (yttria multi-layered). Based on Kuraray Noritake Dental Inc. (KND) proprietary multi-layer technology, this new material offers multiple layers with different levels of chroma and translucency PLUS different concentrations of yttria in a single blank. We talked to two experts from Kuraray Noritake Dental’s Research & Development Department in Japan, Atsushi Matsumoto and Yuta Tajima, about the new product and its specific features.

Mr. Matsumoto, Mr. Tajima, KND already offers a broad range of zirconia materials covering virtually every indication. Why did you decide to start developing yet another dental zirconia?

The KATANA™ Zirconia series has indeed received high praise and great feedback from the market. Users particularly appreciate the remarkably high strength of HTML, the well-balanced aesthetic and strength properties of STML, and also the high translucency of UTML. Although there has been a large increase of zirconia materials in the dental market recently, we have received many requests from our customers for a more universal material that offers the excellent properties of all variants of KATANA™ Zirconia in one product. This product should allow them to fabricate all kinds of restorations from a single disc, from single crowns to full bridges, while maintaining high aesthetic and mechanical properties for both anterior and posterior restorations. As the developer of the KATANA™ Zirconia series, the invention of KATANA™ Zirconia YML is our response to these desires expressed by our customers.

What is the main difference between KATANA™ Zirconia YML and the other available products of the KATANA™ Zirconia Multi-Layered Series?

All layers of KATANA™ Zirconia UTML, STML and HTML are produced from the same basic powder composition and therefore offer the same strength throughout the whole blank. Depending on the case specific requirements, users need to select the most suitable type of material, either a high-strength zirconia or a highly translucent variant. KATANA™ Zirconia YML is an all-in-one zirconia suitable for all cases: It consists of a high-translucency enamel layer, an intermediate layer offering well-balanced strength, translucency and colour, and a high-strength body layer. The raw materials used for this product are developed and produced by KND exclusively for YML. This is another milestone in advanced product development KATANA™ Zirconia.

We have received many requests from our customers
for a more universal material.

In general, the currently available zirconia materials with an integrated strength gradient do not have a very positive image in the eyes of many dental technicians and specialists, due to the fact that in the incisal area, the materials seem to be insufficiently strengthened. This can lead to fractures when it comes to long-span restorations, especially if they are inadequately positioned within the blank. How carefully did KND focus on these problems and how did they try to solve them in order to stand out from the competition?

The current yttria-based multi-layer products on the market are facing complicated limitations in connector position in large cases, such as full-arch restorations, due to the lack of an ideal combination of aesthetics and strength. To overcome this challenge, KND developed well-balanced raw materials of high strength and high aesthetics, and by including these raw materials in the intermediate layer between the enamel and body layers. The result is that even for long-span restorations, it is very simple to position the connectors thanks to its excellent balance between high strength and high aesthetic properties. Due to these unique attributes incorporated in our new product, the risk of deformation and breakage is avoided.

Another problem is the often clearly visible line between the different layers containing different amounts of yttrium oxide, which can be seen at a more detailed inspection after sintering. How did you address this issue?

At KND, we achieved both, adequate translucency gradation and invisible transition lines, even for zirconia layers with different yttria content. This has been accomplished thanks to our multi-layer zirconia manufacturing technology refined over many years, which includes mixing the appropriate amount of each layer's boundary to intentionally avoid transition lines. In addition, the newly developed interlayer raw materials and a newly designed sintering schedule were the keys to success.

How is it possible to have a sintering protocol that works for different zirconia components within the KATANA™ Zirconia YML blank and allows for the shortest sintering times ever?

The amount of shrinkage during sintering is determined by different factors such as the number and quantity of additives (yttria, alumina etc.) it contains. If the shrinkage ratio of each layer is different, transition lines are likely to appear between the layers, which might produce tensions in the material structure. The newly developed raw material for KATANA™ Zirconia YML enables us to control and unify the shrinkage ratio for all layers, even for raw materials with different yttria contents.

The use of proprietary raw materials produced in-house with excellent properties suitable for high-speed sintering was the main precondition that allowed for the development KND’s high-speed sintering schedule (54 min for restorations up to 3-unit bridges), which is available for all products of the KATANA™ Zirconia multi-layered series. This option improves the efficiency of the dental technician’s work and simplifies the workflow.

Are there any differences in milling and adjusting KATANA™ Zirconia YML compared to competitor products?

All KATANA™ Zirconia products from KND have an appropriate hardness with less chipping during the milling process thanks to the raw materials manufactured and refined in-house. Also, after the sintering procedure, it offers excellent chipping resistance, especially during very challenging marginal adjustments.

Is there anything else that sets KATANA™ Zirconia YML apart from other products with an integrated strength gradient?

Yes, KATANA™ Zirconia YML offers reduced sintering deformation, thanks to in-house developed raw materials, based on proprietary technology to control shrinkage rate. Moreover, we offer a wide range of shades (14), which is another important aspect (apart from the material’s well-balanced aesthetic properties and absence of transition lines) for the creation of lifelike restorations. Finally, since three out of four layers meet the conditions for an ISO class 5 classification, there are few restrictions on the design variation of the prosthesis.

Why should a dental technician consider using KATANA™ Zirconia YML instead of any other dental zirconia (in your opinion)?

Atsushi Matsumoto:

It is now possible for dental technicians to produce strong and aesthetic restorations with just one material, KATANA™ Zirconia YML. This allows for a reduced inventory, while working time is significantly shortened due to the possibility of high-speed sintering.

Yuta Tajima:

To my mind, the most convincing properties are excellent firing accuracy due to well-balanced material properties across all layers, the wide range of shades available and the great design flexibility even when designing long-span bridges. Last but not least, the trusted quality of the KATANA™ brand and the label “Made in Japan” are reasons to opt for this new product.

All blanks from the KATANA™ Zirconia Series stand out from other dental zirconia materials due to their particularly fine-grained, densely pressed microstructure, which is the basis for a superior surface quality, edge stability and the resulting accuracy of fit. What is the secret behind this exceptionally high blank quality?

Since we do not know the correlation between marginal stability properties (chipping, etc.) and material compositions, structures etc., it is very difficult to answer this question. It may depend on the structures of the zirconia crystals, the raw material itself, the correct strength level after pre-sintering or any other minor factor during the manufacturing process of the disc. All these factors together, of course, are important.

We are using pigments developed by KND, which have an excellent colour stability without fading even after the final sintering procedure.

Even if the restoration margins have been milled to a very thin profile, they still show smooth margins without any chipping.

A clear advantage of the KATANA™ Zirconia series, much praised by KND's Key Opinion Leaders, is its colour stability and shade match to the "VITA classical shade guide". Can you explain the importance of an in-house conducted addition of additives and color pigments in form of metal oxides to satisfy the user and distinguish KATANA™ Zirconia from competitors’ products?

We are using pigments developed by KND, which have an excellent colour stability without fading even after the final sintering procedure. The particle size is appropriately controlled. In addition, our professional "colour mixing" staff, reflecting the opinions of clinically experienced dental technicians both inside and outside the company, have achieved a pigment mixture that shows only a slight change in shade even in cases with different thicknesses.

What is your vision with regard to future developments in dental zirconia?

Since the introduction of zirconia on the dental market, many significant material advances have been achieved. Today, there are high-strength, low light-transmitting zirconia materials up to high light- transmitting, low strength zirconia materials available on the market. Furthermore, there are now also high light-transmitting, low strength zirconia materials in mixed systems (YML series) offered. Our foremost goal is to develop the ultimate zirconia in near future, combining both high strength and high light transmission, which breaks the general expectation of a compromise between strength and translucency within zirconia materials.

Daniele Rondoni, hammasteknikko (CDT)

Tavallisesti hammaskeraamin esteettisyyttä – erityisesti sen läpikuultavuutta – voidaan parantaa vain taivutuslujuuden kustannuksella. Kararay Noritake Dental -yhtiön Uusi KATANA™ Zirconia on erilainen. Rungon alaosan taivutuslujuudella 1,100 MPa:a ja korkealla läpikuultavuudella rungon yläosassa ja inkisaalisesti esteettisyydelle ei ole indikaatiorajoja, kuten alla oleva tapaus osoittaa.

Kuva 1. KATANA™ Zirconia YML -materiaalista toteutetut 4-osaiset ja 6-osaiset sillat jyrsinnän ja sintrauksen jälkeen. Vestibulaaripinnan luonnollinen rakenne on tärkeä edellytys monoliittisten restauraatioiden esteettisyydelle.

Kuva 2. Kahden sillan frontaalinäkymä mallin päällä CERABIEN™ ZR FC Paste Stain -tuotteen (Kuraray Noritake Dental Inc.) ultramikrokerroksen levittämisen jälkeen.

Kuva 3. Värjätyt ja lasitetut restauraatiot ja niiden läpikuultavuus valossa.

Kuva 4. Potilaan suuhun sementoidun 6-osaisen sillan bukkaalinäkymä.

Kuva 5. Potilaan suuhun sementoidun 6-osaisen sillan bukkaalinäkymä.

Tämän uudentyyppisen monikerroksisen zirkoniumoksidin avulla voidaan valmistaa esteettisiä monoliittisia restauraatioita myös etualueella. Eri kerrosten lujuuseroista huolimatta materiaalilla voidaan toteuttaa lujuudeltaan erinomaisia restauraatioita ja materiaalin hyvä läpikuultavuus inkisaalialueella takaa luonnollisen lopputuloksen sintrauksen jälkeen. Ultramikrokerrokset ja monoliittisen pinnan lasitus takaavat lopputuloksen, johon potilaat ovat tyytyväisiä.

DANIELE RONDONI, MDT

Tässä videossa hammasteknikko Kazunobu Yamada näyttää, miten hän sävyttää ja lasittaa uutta Katana Zirconia YML -zirkoniaa. Katso vaiheittain etenevä video erittäin esteettisen ja luonnollisen lopputuloksen saavuttamisesta erilaisilla FC Paste Stain -sävyillä.

Esittelemme Katana Zirconia -tuoteperheen uusimman jäsenen Katana Zirconia YML:n. Tässä vallankumoukseillisessa zirkoniakiekossa on monikerroksinen rakenne, joka parantaa paikkojen estetiikkaa merkittävästi. Haluatko tietää, miten voit kehittää hammaslaboratoriosi palveluja tämän huippulaadukkaan tuotteen avulla? Katso videolta lyhyt yhteenveto tämän käänteentekevän uuden zirkoniakiekon ominaisuuksista!

We are pleased to share with you short training videos for CERABIEN™ ZR (CZR) porcelain.

Check out the below working steps and learn more about how to achieve outstanding aesthetics using this tried and proven material.

It is strong, it is pre-shaded like natural teeth, and it is reliable: KATANA™ Zirconia HTML, the highest strength version among KATANA™ multi-layered zirconia series. Now, Kuraray Noritake Dental Inc. has carefully optimized the product to further improve its optical properties and to harmonize the sintering schedules with all other materials of the KATANA™ Zirconia Multi-Layered Series.

The new KATANA™ Zirconia HTML Plus offers all popular properties of its predecessor, including the multi-layered colour structure and uniform strength distribution throughout the blank. It is suitable for a variety of indications including long-span bridges with a minimum wall thickness of just 0.4 mm in the anterior and 0.5 mm in the posterior region. This allows for minimally invasive preparations, while the user may choose between a monolithic, cut-back or framework design combined with the preferred finishing technique.

The PLUS refers to additional benefits like the material’s improved optical properties: KATANA™ Zirconia HTML Plus offers an increased translucency of 45 percent (compared to 43 percent KATANA™ Zirconia HTML) and an even more natural shade appearance of the manufactured restorations. “As the colour of the restorations appears deeper, more vivid and more saturated, and the translucency is closer to that of natural teeth, a great optical integration is achieved straight away. This leads to a reduced finishing effort”, says Mathias Fernandez Y Lombardi, EU Scientific Manager Dental Ceramics & CAD/CAM Materials at Kuraray Noritake Dental. At the same time, the high flexural strength (1,150 MPa) is maintained, providing for an unlimited range of indications.

Like its predecessor and all other materials of the KATANA™ Zirconia Multi-Layered Series, KATANA™ Zirconia HTML Plus is the result of an in-house development, powder compilation and blank production process that is able to control every detail. This enabled our specialists to achieve a precise alignment of the desired properties, while maintaining a high blank quality that leads to the accurate milling results with smooth surfaces and regular edges users of KATANA™ Zirconia HTML are familiar with.

The unique powder composition and specific in-house blank production procedure also allowed us to streamline the sintering protocols. For single-tooth restorations and bridges with up to three units, three different protocols are available: a 54-minute high-speed sintering programme specifically developed for remake and rush cases, a 90-minute schedule and the traditional seven-hour sintering programme. The latter is also suitable for long-span restorations.

These three options and identical schedules are available for KATANA™ Zirconia HTML Plus, KATANA™ Zirconia UTML, KATANA™ Zirconia STML and the new KATANA™ Zirconia YML with additional flexural strength and technical translucency gradation. With this feature, it becomes extraordinarily easy to standardize procedures despite an indication-specific selection of the best-suited KATANA™ Multi-Layered Zirconia.

Mathias Fernandez Y Lombardi concludes: “KATANA™ Zirconia HTML Plus is completely in line with our philosophy of developing products that support their users in streamlining and simplifying procedures without limiting choices. Users may choose from a whole range of highly specialized or universal zirconia solutions, may opt for their preferred design and finishing technique, and can select the sintering protocol that suits their individual needs. At the same time, the manual effort is reduced and the risk of starting the wrong sintering programme is eliminated.”

One for all: With KATANA™ Zirconia YML (yttria multi-layered), Kuraray Noritake Dental Inc. has launched a true allrounder covering traditional and new zirconia indications. At the KATANA™ Zirconia YML Virtual Kick-Off Symposium on July 3, 2021, professionals from the clinical and technical field as well as scientific experts from Kuraray Noritake Inc. provided insights into the properties and benefits of the innovation. We had a conversation with three of them about the specific features of KATANA™ Zirconia YML and its potential role in the dental practice and laboratory. Mathias Fernandez Y Lombardi, EU Scientific Manager Dental Ceramics & CAD/CAM Materials, provided insights from inside the company, while Prof. Dr. Florian Beuer MME, Charité – Universitätsmedizin Berlin and MDT Nondas Vlachopoulos, owner of the dental laboratory AestheticLab in Athens, shared their external perspectives.

Prof. Dr. Florian Beuer MME and Mathias Fernandez Y Lombardi during the conversation at the Kick-Off Symposium in Munich.

MDT Nondas Vlachopoulos virtually attended the meeting.

What are the most important features and benefits of the new KATANA™ Zirconia YML?

Mathias Fernandez Y Lombardi: KATANA™ Zirconia YML is a 5^th generation zirconia featuring next-generation multi-layered technology: it offers colour, translucency and flexural strength gradation in one disc – for a virtually unlimited indication range. As it may be used as the only zirconia or even ceramic CAD/CAM material in a laboratory or milling centre, it is designed for everyone who would like to simplify and standardize laboratory procedures. It may be sintered within 54 minutes, offers a high accuracy of fit and may be finished using time-saving techniques.

The new discs presented at the KATANA™ Zirconia YML Virtual Kick-Off Symposium.

Multi-layered structure of KATANA™ Zirconia YML.

What are the benefits of using a single zirconia for every indication from the dental technician’s perspective?

Nondas Vlachopoulos: The use of a universal zirconia solution with a high aesthetic potential and well-aligned mechanical properties allows dental technicians to reduce their inventory and streamline their procedures – from designing to finishing. Nowadays, we all know that, in order to optimize the outcomes, it is essential that we develop a deep understanding of a material’s properties, respect its design parameters (like minimum wall thicknesses) and adhere to the sintering protocols. It is much easier to accomplish this for a single material than for many different ceramics, and the potential for errors is minimized with a single-material approach. With KATANA™ Zirconia YML, this approach enables us to produce very different outcomes depending on where the restoration is placed in the multi-layered blank.

What are the benefits of using KATANA™ Zirconia YML as the only ceramic material from the dental practitioner’s perspective?

Florian Beuer: To my mind, the most important benefit of using a single zirconia every time lies in a simplified documentation. When different ceramic materials are used in the dental laboratory, we need to keep track of the material selected in every single case. Only in this way, it is possible to make the right cementation decisions (regarding cement selection and the appropriate pre-treatment of the restoration). In addition, when it comes to failure of the restoration, we need to know which material was used to prove that it has been processed correctly and is suitable for the actual indication. This is much easier when a single material is used every time. Zirconia is predestined for this approach as it is forgiving, supports minimally invasive preparations and – in case of KATANA™ Zirconia YML – almost everything can be done with it.

What are the secrets of KATANA™ Zirconia YML that allow for excellent treatment outcomes despite the one-for-all approach?

Mathias Fernandez Y Lombardi: KATANA™ Zirconia YML is based on a completely new, seamless multi-layer technology combining different, newly developed raw materials with varying yttria concentrations in a single blank. The inhouse development of the powders and their precise adjustment of each other in terms of properties like shrinkage and coefficients of thermal expansion are prerequisites for a smooth transition from one layer to the next. Only if the layers are very well integrated, it will be possible to reliably produce even long-span restorations with a delicate design, perfect fit and flawless aesthetics (without transition lines). The aesthetic properties were also optimized by integrating clinical instead of purely technical translucency.

Please explain the term clinical translucency.

Mathias Fernandez Y Lombardi: Usually, translucency of dental materials like zirconia is measured in its white, pre-shaded state. This so-called technical translucency value is increased by adding yttria to the formulation, which makes the zirconia itself appear brighter (increasing the whiteness). The translucency of the final restoration, however, is also affected by pigments and other additives in the formulation. Consequently, monolithic restorations made of different materials with the same technical translucency value may vary widely in terms of their actual, clinical translucency, which affect the overall aesthetic potential. The formulation of KATANA™ Zirconia YML has been optimized by carefully selecting and combining the right additives to obtain a natural, tooth-like translucency.

Translucency and shade appearance of KATANA™ Zirconia YML (left column) compared to various other 5^th generation zirconia materials.

Nondas Vlachopoulos, is this measure of optimizing the clinical translucency a key feature enabling the one-for-all approach of KATANA™ Zirconia YML?

Nondas Vlachopoulos: The positive effect attributed to this measure is noticeable, as KATANA™ Zirconia YML has a particularly warm and natural appearance especially in the body area some other materials with flexural strength gradation are lacking. This leads to an exact colour match with the VITA classical A1-D4 shade guide, and reduces the need for manual shade adjustments. This is important for a one-for-all approach, as the material should be a perfect basis for the production of monolithic restorations, which are not covered by a thick porcelain layer able to mask any imperfections. However, there is another key feature that facilitates the zirconia’s use for virtually every indication: Its exceptional design flexibility. It enables users to control the translucency and overall aesthetics by positioning the restoration quite freely within the blank. For restorations with up to three units, there is a complete freedom of placement. Larger restorations with four or more units need to be positioned in a way that at least 50% of the connector cross-section is in the bottom half of the disc. This is easily accomplished and gives us optimal options to exploit the various properties of each layer depending on the aesthetics and strength needed in each specific case.

Positioning guidelines for KATANA™ Zirconia YML.

What is the recommended finishing procedure?

Mathias Fernandez Y Lombardi: In principle, all designs and finishing options are available for KATANA™ Zirconia YML – from a monolithic design individualized with liquid ceramics to microlayering after a minimal vestibular cutback or even full ceramic layering on frameworks. As the aesthetic potential of the zirconia is already high, however, we believe that in most cases, the first option is absolutely sufficient. In this case, a monolithic restoration is milled and the surface subsequently treated with our liquid ceramic system CERABIEN™ ZR FC Paste Stain. The pastes are easily applied in ultra-thin layers, very well controllable and wear resistant.

Anterior and posterior crown made of KATANA™ Zirconia YML after sintering (left part) and after sintering and finishing with CERABIEN™ ZR FC PASTE STAIN (right part).

Nondas Vlachopoulos, what is your preferred finishing procedure for restorations made of KATANA™ Zirconia YML?

Nondas Vlachopoulos: In the posterior area, I often opt for monolithic restorations individualized with CERABIEN™ ZR FC Paste Stain. The technique leads to beautiful outcomes a large majority of patients would love to see even in the anterior region. However, as orders for the production of anterior restorations coming my way are usually placed by clinicians and patients with the highest possible aesthetic demands, I often go for a framework design and full porcelain layering with CERABIEN ZR Porcelains. The materials (like EX-3 portfolio for metal frameworks) are based on synthetic feldspathic porcelain with a structure and particle distribution very similar to natural dentin and enamel. All in all, I like the fact that I can select the most suitable finishing technique for every individual case, and I believe that it is often possible to reduce the finishing effort to a minimum.

Clinical translucency, design flexibility, mechanical properties: Apparently, the differences between the available zirconia materials – even of the 5^th generation – are huge. How can users ensure that the material they select is of high quality and offers favourable mechanical as well as optical properties?

Florian Beuer: When the first-generation zirconia materials appeared on the dental market, laboratory testing revealed that there are huge differences in quality between materials of different manufacturers. Although independent studies comparing the properties and behaviour of 5^th generation zirconia are still scarce, it may be assumed that differences do exist. My recommendation is to select a several materials from well-known manufacturers supporting clinical studies, compare the study results already available, and test the selected options in the laboratory setting. Directly comparing design concepts, the processing quality and final appearance will most likely reveal which material is a dental technician’s favourite. I am sure that KATANA™ Zirconia YML is among the materials worth being tested.

Thank you for this insightful conversation.