Tugev ning vastupidav liimühendus hammaste ja restauratsiooni vahel on otsustavaks teguriks, mis mõjustab hambaravi restauratsioonide pikaajalist tulemuslikkust. Liimühenduse kvaliteeti ei mõjusta siiski mitte üksnes kasutatud sidusaine või tsemendisegu, vaid ka liimühenduse pealispinna seisukord. Nende jaoks, kes tahaksid lihtsal viisil kindlustada endale hammaste ja restauratsioonide puhtad pealispinnad, on ettevõte Kuraray Noritake Dental välja töötanud vahendi KATANA™ Cleaner, mis on MDP soola sisaldav universaalne puhastusvahend ja mille pH tase on 4,5, suusiseseks ja suuväliseks rakendamiseks.

On tõestatud, et süljes ja veres sisalduvad valgud avaldavad negatiivset toimet hambaravi sidusainete tulemuslikkusele. Ent eriti just kaudsete protseduuride käigus ei ole siiski võimalik hoida liimühenduste pealispindu suuvedelikest vabadena. Hiljemalt proovipaigalduse hetkeks on ettevalmistatud hambad ja restauratsioon saastunud ning vajavad puhastamist. Veega loputamisel ei ole soovitud toimet ning isegi paljude saadavalolevate puhastusvahendite kasutamisel jääb teatud hulk valkusid tavaliselt pealispinnale alles. Katsetused näitavad, et vahendit KATANA™ Cleaner kasutades või liivajoaga töödeldes saavutatakse soovitud kõrge puhastustoime ilma liimühenduse tugevust ohustamata. KATANA™ Zirconia restauratsioonide puhul peab paika see, et vahend KATANA™ Cleaner viib soovitud tulemusteni ka dentiini ja hambaemaili puhul – suuõõnes olevate pealispindade puhul, mille jaoks liivajoaga töötlemine ja suurem osa teistest puhastusvahenditest ei ole näidustatud.

Vahendi KATANA™ Cleaner kasutamine annab veel ühe eelise: puhastusprotseduur on erakordselt lihtne, kiire ja puhas. Universaalne puhastusvahend on saadaval pudelis, millel on innovaatiline lahtipööratav kork, mis võimaldab ühe käe abil aluse peale annustamist. Seejärel hõõrutakse see kümneks sekundiks restauratsiooni ja ettevalmistatud hammaste struktuuri või abutmendi pealispinnale, loputatakse veega ja kuivatatakse. Tänu MDP soola kõrgele pindaktiivsusele on need kümme sekundit piisavad selleks, et eemaldada substraadilt pea täielikult valgud, luues seega tingimused, mis on väga sarnased nendega, mida võib leida liimühenduse mittesaastunud pealispinnalt. Järgnevalt rakendatakse valitud sidusainet või tsementi  – nt PANAVIA™ V5 või PANAVIA™ SA Cement Universal – vastavalt tootja kasutusjuhistele.

Tulemuseks on tugev kauakestev liimühendus, mis annab kasutajatele meelerahu. Pilootkasutajad, kes on juba toodet katsetanud, nõustuvad sellega, et vahend KATANA™ Cleaner on lihtne viis selleks, et optimeerida liimühenduse kvaliteeti ja muuta mistahes sidusainetega protseduurid sujuvamaks.

Pressi ja klientide päringute jaoks
Kuraray Europe Benelux, Nordics & Baltics
infobaltics@kuraray.com l kuraraynoritake.eu/ee/katana-cleaner

Our commitment to you:

Kuraray Noritake dental products offer dental professionals all over the world high-quality products using simple procedures with long-lasting results. With the COVID-19 outbreak, all of us are now going through difficult times which we were not prepared for. Our thoughts are with all those people who are affected by the coronavirus pandemic.

We, at Kuraray Europe GmbH, as the European sales office of Kuraray Noritake Dental Inc., feel a strong responsibility towards our customers and partners, colleagues and communities and we would like to inform you that, in spite of the challenges we are now facing, we will do our best to provide you with the services that you require:

1. Business as usual.

It is both important that we continue to provide products and services to all our customers and at the same time secure the safety of our employees. With that in mind, we have transitioned most of our employees not involved in manufacturing to working remotely and eliminated all non-essential and cross-border travel. This change should not impact in any way how you, our dear customers, contact us. We are ready, willing and able to support you. Clearly, to keep face-to-face interactions to a minimum, we will focus our communication on what is most convenient for you – either a phone call, through email or video chat (Skype, FaceTime or Google Hangout). Whatever is convenient for you!

2. Delivery

As of today, we have sufficient inventory for both dentists and dental labs, as well as reliable logistics. Thanks to our global network of dealer-depots, dental professionals all over the world will continue to have direct local access to our wide range of Kuraray Noritake Dental products. Kuraray Europe GmbH will exert every effort possible to deliver your orders on time. Parallel to this, we kindly ask you to make sure that somebody in your office will be available to receive the parcel. In case, for whatever reason this is not possible, please notify your supplier in advance.

3. Technical Services.
   Our technical service is available to meet your needs.

If there is anything else that we can do to support you, please let us know.

We wish you all the best. Take good care and stay healthy.

Sincerely,

Kuraray Europe GmbH

BU Medical

By Daniele Rondoni, RDT

A middle-aged patient sought dental advice because she felt uncomfortable with the aesthetic appearance of her upper front jaw, specifically regions 11, 12, 21 and 22. Additionally, she was not happy about the diastema between her upper central incisors.

Fig. 1: Initial situation.

The oral examination showed four crown regions (12-22) and revealed that all of them have deteriorated. Tooth 21 had undergone an endodontic treatment, while teeth 11 to 22 have been newly built up. Due to the deteriorated conditions, all affected teeth were taken into consideration in the planning and designing of new restorations, including the intention to close the diastema between the width-to-length-ratio for the incisors.

The best suitable material for a natural look in combination with a close gingival attachment to the restoration is, in this case, zirconia, because of its biocompatibility and gentleness to the gingival region. The KATANA^TM Zirconia series from Kuraray Noritake Dental, offers a line-up of high-quality materials combined with true-to-life aesthetics, due to its natural color gradient within the material.

Fig. 2: Preparations, showing discoloration in the cervical area of tooth 21.

Fig. 3: Occlusal view of the preparations.

Fig. 4: The four zirconia crowns after designing followed by milling.

Fig. 5: Result directly after sintering.

To achieve an even more natural-looking and aesthetic restoration, CZR FC Paste Stains were used externally on the zirconia surface.

Fig. 6: Characterization of the restoration.

As often done, Cervical 2 was used to give an orange tint to the cervical area, to accentuate even better the natural tooth gradation. For the incisal areas, Grayish Blue in combination with Value was used to enhance transparency and opalescence. Same procedure applied to the approximal areas. Mamelon Orange 2 was used to reproduce dark orange stain on the mamelons.

Fig. 7: Result after cementation of the four new zirconia crowns. Their shape and chroma blend harmoniously with the arch.

Fig. 8: The vestibular view showing natural-looking characterization.

During a period of five years, annual check-ups showed intact crowns and a healthy gingiva. Additionally, the durability of the restorations, including their mechanical and optical properties revealed no signs of deterioration.

A strong and durable bond between the tooth and the restoration is a decisive factor influencing the long-term performance of dental restorations. The quality of the bond, however, is not only affected by the bonding agent or cementation solution used, but also by the condition of the bonding surface. For those who would like to ensure clean tooth and restoration surfaces in an easy way, Kuraray Noritake Dental has developed KATANA™ Cleaner, a universal cleaner with MDP salt and a pH of 4.5 for intra- and extra-oral application.

It has been proven that proteins present in saliva and blood have a negative effect on the performance of dental adhesives. Especially in indirect procedures, however, it is impossible to keep the bonding surfaces free of oral fluids. At try-in at the latest, the prepared tooth and the restoration are contaminated and need to be cleaned. Rinsing with water does not have the desired effect, and even with many available cleaners, a certain amount of proteins are usually left on the surface. Tests show that by using KATANA™ Cleaner or by sandblasting, the desired high cleaning effect needed is obtained, without compromising bond strength. This is true for KATANA™ Zirconia restorations, while KATANA™ Cleaner also leads to the desired results on dentin and enamel – surfaces in the oral cavity for which sandblasting and most of the other cleaners are not indicated.

The use of KATANA™ Cleaner offers yet another advantage: the cleaning procedure is extraordinarily simple, quick and neat. The universal cleaner comes in a bottle with an innovative flip-top cap, enabling single-handed dispensing onto the dish. It is then rubbed into the surface of the restoration and the prepared tooth structure or the abutment for ten seconds, rinsed with water and dried. Thanks to the high surface activity of MDP salt, these ten seconds are sufficient to remove the proteins on the substrate almost completely, creating conditions very similar to those found on a non-contaminated bonding surface. Subsequently, the selected bonding agent or cementation solution – e.g. PANAVIA™ V5 or PANAVIA™ SA Cement Universal – is applied according to the maufacturer’s usage instructions.

The result is a strong long-lasting bond, which gives users a peace of mind. Pilot users who have already tested the product agree that KATANA™ Cleaner is the easy way to optimise bond quality and streamline any adhesive procedure.

As co-editor-in-chief of the Journal of Adhesive Dentistry, Prof. Bart Van Meerbeek is one of the most respected authorities on the topic of dental bonding agents. Here, he discusses how they have advanced over the last three decades and what the future of adhesive dentistry might look like.

Prof. Van Meerbeek, how have bonding agents changed and advanced since you first began studying them?

I believe that the great progress dental adhesive technology has undergone in the last 30 years, and the progress in bonding agents in particular, has had a great impact on the field of dentistry and particularly on restorative dentistry, of course. Many of the current restorative dental procedures make use of adhesive materials and techniques and have advanced greatly compared with when I wrote my dissertation more than two decades ago on the topic of adhesion to dentine. Adhesion to enamel is, of course, relatively easy to achieve in comparison with adhesion to dentine, and when I first started researching this topic, I was limited to conducting clinical trials in which we were confronted with a relatively high number of restoration losses in the short term. I was lucky to have been able to witness first-hand the fast advancements dental bonding has made, having conducted research in this field now for nearly 30 years.

At a certain point, the research community started to realise that there is a smear layer in-between, which is created through cavity preparation, and that this layer interferes with bonding. If you want to achieve successful micromechanical and chemical bonding to the substrate, you first need to do something with this smear layer.

After this, we entered the era of conditioners and primers. In the past, the restorative community had been a little bit afraid of using phosphoric acid owing to its potential for pulp irritation. More and more, however, dental professionals began to use etchants with this chemical in them, as well as primers that effectively promoted bonding between the adhesive resin and dentine. While having achieved excellent bonding performance with multistep adhesives in the laboratory, as was later confirmed in clinical studies, further design and development of adhesive materials next focused on simplification and shortening of bonding procedures.

Out of this, two kinds of adhesives, making use essentially of two different bonding modes, arose: the etch-and-rinse adhesives and the self-etch, or etch-and-dry, adhesives. The newest generation of universal adhesives now enables dental practitioners to choose which of the two bonding modes to apply with one single adhesive formulation.

What advantages do bonded restorations offer over more traditional methods?

Bonded restorations are minimally invasive—the dentist doesn’t have to remove non-diseased tissue to create undercuts to keep the restoration in place, allowing for a more conservative approach. Keeping as much enamel as possible should be a goal of any restorative procedure, as it is simply the best tissue to bond to. Although bonding to dentine has always remained more challenging and has actually slowed down our adhesive endeavours for a long time, adhesively restoring teeth, involving also effective bonding to dentine, can today be achieved in a reliable, predictable and durable way.

Along with highly successful implantology to replace missing teeth, lessening the need for bridges, solitary tooth restorations have substantially increased in number. Bonding promoted the additional shift from conventional tissue-invasive crowns to tissue-preserving partial tooth restorations, as modern adhesives can hold such partial restorations in place on rather flat and even non-retentive surfaces. In addition, bonding procedures allow for more natural-appearing restorations to be achieved by techniques to adhesively lute aesthetic restorations made of glass-ceramics and even the strong zirconia ceramics that no longer can be considered non-bondable.

What is your opinion regarding the current generation of universal adhesive solutions?

I think that this generation is very good, but that they are still not always as good as the more traditional gold standard two-step self-etch and three-step etch-and-rinse adhesives when it comes to their intrinsic bonding potential to dental tissue. However, I do see it as a positive that many of these universal adhesives integrate the MDP monomer, which should be considered to be one of the best functional monomers available today, though it needs to be present at a high concentration and purity level.

The MDP monomer is, generally speaking, excellent at bonding to zirconia as well. When it comes to bonding to different kinds of ceramic as well as resin-based composite restorative materials, it is always helpful to know which universal adhesives contain silane and are claimed to no longer need further treatment of the restoration. This has the advantages of lower technique sensitivity and fewer procedural steps—provided that it does, of course, work. There is current scientific evidence that the silane incorporated in today’s acidic aqueous universal adhesives is, however, insufficiently stable. Fortunately, research is underway to develop new universal adhesives that contain other silanes with higher stability in water at higher acidity.

Overall, I believe that a restoration primer that contains a high concentration of silane along with the MDP monomer is still more effective than many universal adhesives for bonding to restorative materials, since these universal adhesives can contain many other ingredients that create a kind of competition within the material to reach and interact with the substrate surface, leading to lesser bonds.

Another shortcoming of universal adhesives is their thin film thickness and relatively high hydrophilicity, promoting water uptake and hence making them sensitive to hydrolytic degradation. In this light, it’s important to note that, when a viscous and hydrophobic flowable composite is applied on top of a universal adhesive, it can make up for this somewhat and allow for durable bonding to take place.

Is the MDP monomer crucial to the ultimate success of universal adhesives? Are there other factors that can influence this?

Well, it’s very clear that the MDP monomer is one of the most effective monomers available, given its primary chemical binding potential to hydroxyapatite. However, there are significant differences in the MDP monomer purity and concentration levels between these products, factors that are affected by whether or not the monomer is synthesised by the company itself or whether this process is outsourced. Essentially, a universal adhesive that contains a high concentration of very pure MDP monomer should perform the best.

Are there any specific advantages that a self-etch adhesive possesses?

The biggest advantage is that it doesn’t remove all hydroxyapatite and minerals present in dentine and so keeps the weaker dentinal collagen protected. Phosphoric-acid etching results in relatively deep and complete demineralisation with collagen exposure, making the bond more prone to degradation. Partially maintaining minerals around collagen using a mild self-etch adhesive additionally allows for strong ionic bond formation to take place when the adhesive in particular contains the functional monomer MDP. In addition, one should be aware that, while chemical binding doesn’t necessarily lead to higher bond strength, it can create better long-term bond durability.

What do you see as the next step in adhesive dentistry?

One possibility is to reduce the number of steps in the adhesion process with the final goal of having self-adhering restorative materials. There have been developments in this direction, including studies and commercial products, though the products haven’t always proved to be very effective and their bond durability is unclear. Now, however, there are newer materials coming to market with claims that they can be used with no pretreatment. Their clinical effectiveness, nevertheless, still needs to be proved and guaranteed before such self-adhering restorative materials could be used as true amalgam alternatives in routine dental practice.

Another possibility, and current R & D hype, is the development of bioactive adhesives. Many dental researchers and many companies want adhesives not only to deliver good bonding performance but also to have certain therapeutic benefits. What exactly a bioactive adhesive is depends on who you’re talking to. Some researchers believe that they should have antibacterial qualities, whereas others state that remineralisation of dentine and pulpal cell interaction are needed to qualify for the term “bioactive”. We certainly need to investigate whether we can give these materials these additional properties, but on one condition: that the adhesive material does not lose any of its original bonding abilities. That, in my opinion, is the biggest challenge for the future of adhesive dentistry.

Auhinnatud Clearfil Majesty^TM ES Flow on nüüd veelgi mitmekülgsem, saadaval kolmes voolavusversioonis.

Dental Advisori poolt viiel järjestikusel aastal peaauhinnaga pärjatud CLEARFIL MAJESTY^TM ES Flow on nüüd saadaval kolmes voolavusversioonis, tõstes mitmekülgsuse täiesti uuele tasemele ning muutes hambaravispetsialistide jaoks soovitud restauratsioonitulemuste saamise senisest veelgi kiiremaks ja hõlpsamaks.

CLEARFIL MAJESTY^TM ES Flow universaalne voolav komposiit on rahvusvaheliselt tunnustatud restauratsioonimaterjalide spetsialisti Kuraray Noritake Dentali uusim innovaatiline lahendus. Kuraray Noritake Dental on eduka CLEARFIL MAJESTY^TM Flow baasil välja töötanud täiustatud toote, mis võimaldab korraga nii restauratsiooni, reparatsiooni kui ka tsementatsiooni tegemist ilma vajaduseta kasutada muid komposiite.

Tänu tootes CLEARFIL MAJESTY^TM ES FLOW kasutatud Kuraray Noritake Dentali firmaomasele silaanliiteainele seotakse nii alamikrontäidised kui ka nanokobartäidised stabiilselt komposiiti. See võimaldab tootel CLEARFIL MAJESTY^TM ES FLOW säilitada voolavus ka kõrge täidisekoormuse korral. Tulemuse muudavad veel kaunimaks nanokobarad ehk valgust hajutavad täidised, mis võimaldavad komposiidil ümbritseva hambapinnaga sujuvalt ühte sulanduda.

Toote CLEARFIL MAJESTY^TM ES FLOW eelised

• Tõhus ja hõlbus käsitsemine: süstlast otse peale kantav, lihtne ja kerge poleerida.
• Tugev: toote painduvustugevus on 150 MPa ja survetugevus 373 MPa.
• Lai rakendusala: kõik õõnsusklassid, tsementeerimised ja parandused.
• Välimus: suurepärane värvikohandus tänu valguse hajutamise tehnoloogiale.

AINUS KOMPOSIIT, MIDA HAMBASPETSIALIST VAJAB.

Kuraray Noritake Dental Inc. on ettevõte, mis loodi ettevõtete Kuraray Medical Inc. ja Noritake Dental Supply Co ühinemisel aprillis 2012. Ettevõttel on ulatuslik orgaanilise ja anorgaanilise keemia alane kogemustepagas, mis võimaldab arendada uusi hambaravi tipptooteid alates keraamikast kuni komposiitide ja biomaterjalideni.

Lisateavet leiate veebisaidilt: kuraraynoritake.eu/ee/clearfil-majesty-es-flow
Kuraray Europe Benelux B.V., Nordics & Baltics l infobaltics@kuraray.com

By Japanese Dr. Shigeru Adachi, Cusp Dental Supply Co. Ltd

Initial situation

Checking of the shade (Posterior Crowns: FC Paste Stain, Anterior Crowns: Micro layered CERABIEN™ ZR)

Checking the restoration on the model

Final situation

Ceramist:

MDT Shigeru Adachi, Cusp Dental Supply Co. Ltd

MDT Adachi is a promising ceramist of the new generation, who has been working for Cusp Dental Supply Co. Ltd. since 2013. He received the Award of Excellence 2018 at QDT TECHNICAL CONTEST.

April, 2013 - Present
Working for Cusp Dental Supply Co., Ltd.
March, 2013
Graduated from the Osaka Ceramic Training Center
April, 2009 - March, 2011
Worked for Tsuruga Denatal Laboratory
March, 2009
Graduated from the Aishi Dental Technician College

MDT SHIGERU ADACHI USED KATANA™ ZIRCONIA HTML AND CZR FC PASTE STAIN FOR HIS CASE STUDY

By Irfan Abas
Dental implantologist & restorative dentist

Irfan Abas is a specialist in the field of oral implantology & restorative dentistry and an international speaker on the subject. He has given more than 20 presentations, workshops and live surgery courses throughout the world. TP - a dutch dental magazine, of which he is also editor, has published multiple articles under his name. Another highlight is a publication in the NTvT, in collaboration with Prof. Gert Meijer (Radboud UMC), under whose supervision Abas successfully completed the four-year postdoctoral training Reconstructive Dentistry in 2014. He is also an instructor and lecturer for the AAIE and chair of MINEC Netherlands. Irfan Abas has his own practice in Bussum, the Netherlands (tandartsabas.nl).

A healthy 42 year-old male patient requested reconstruction of his central incisors, which were badly worn.

Pre-Treatment

After producing the mock-up, grooves were prepared through the mock-up.

To fit two lithium disilicate veneers, a preparation of 1 mm was required. After removing the mock-up, the preparation was perfected.

Checking the space using a silicone mold.

Definitive preparation (frontal)

Temporary veneers made from temporary resin based material (Protemp)

Spot-etching before bonding the temporary veneers in place.

A small amount of flowable composite applied to the etched surfaces.

Light curing the entire surface of the temporary veneers.

Finished temporary veneers.

The veneers constructed by the dental technician.

Checking the fit of the veneers

Rubber dam fitted to enable controlled adhesive cementation.

Etching with 35% phosphoric acid K-Etchant Syringe for 10 seconds.

Treatment with selfetching primer PANAVIA™ V5 Tooth Primer (left on for 20 sec.)

Etching of the lithium disilicate veneers with hydrogen fluoride.

Clearfil Ceramic Primer Plus MDP-silane primer applied to the veneers.

Veneers secured to a placement instrument before definitive cementation

PANAVIA V5 Paste applied to the inner surface of the veneer.

PANAVIA V5 Paste spread over the veneer.

Veneer fitted and excess removed.

Light curing (minimum 10 sec.).

Immediately after the adhesive cementation with PANAVIA V5.

Immediately post-op.

Immediately post-op.

Two months post-op.

One year post-op.

One year post-op.

Aasta pärast murrangulise KATANA™ Zirconia Blocki turuletoomist on ettevõttel Kuraray Noritake Dental, mis on üldtunnustatud oma uuendustegevuse ja eriteadmiste poolest restauratsioonimaterjalide alal, hea meel teatada uue toote – KATANA™ Zirconia Block for Bridge turuletoomisest.

KATANA™ Zirconia Blockil on palju eeliseid, see pakub hambaarstile uuendusliku, mitmekihilise tsirkooniumiploki, mis on ühtaegu loomuliku välimusega ja vastupidav. Kasutamisel koos Dentsply Sirona CEREC-süsteemiga toimub paagutamine nüüd kiiremini kui kunagi varem – vaid 18 minutiga – mistõttu on võimalik valmistada hambaravikabinetis kohapeal täielik tsirkooniumrestauratsioon (kujundada, freesida ja paagutada) ligikaudu 35 minutiga.

Nüüd, mil müügile saabus KATANA™ Zirconia Block for Bridge, saab hambaarst kasutada veel mitmekülgsemat toodet, millel on kõik KATANA™ Zirconia Blocki eelised ja millega saadakse silmapaistva paindetugevusega ühtlased restauratsioonid, mille poolläbipaistvus matkib suurepäraselt loomulike hammaste oma.c

Ajakirjanike ja klientide päringuteks:
Kuraray Europe Benelux B.V., Nordics & Baltics
infobaltics@kuraray.com / kuraraynoritake.eu/ee/katana-zirconia-block

Kuraray Noritake Dental Inc on 2012. aasta aprillis Kuraray Medical Inc ja Noritake Dental Supply Co ühinemise tulemusena moodustatud ettevõte. Nende kahe rahvusvahelise ettevõtte ühendatud jõule tuginedes võtab Kuraray Noritake Dental eesmärgiks luua tootearenduse, tootmise ja müügi alal maailmas juhtpositsiooni saavutavat sünergiat.

Ettevõte kasutab oma erakordseid orgaanilise ja anorgaanilise keemia alaseid eriteadmisi, mille põhjal töötatakse välja edasisi kõrgtasemel hambaravitooteid – keraamikast kuni komposiit- ja isegi bioloogiliste materjalideni.

Kuraray Noritake Dental peab kõige tähtsamaks patsiendi naeratust. Seetõttu on ettevõte alati püüdnud tuua hambaravisse inspireerivaid uuendusi ning luua nii praegu kui ka tulevikus minimaalselt invasiivseid ja biolisanditega lahendusi, et patsientidel jääksid oma hambad kogu eluks alles.

KATANA™ AVENCIA™ Block on uusim läbimurre ettevõttelt Kuraray Noritake Dental, mis on üldtunnustatud oma uuendustegevuse ja eriteadmiste poolest, mis on omandatud paljude aastate jooksul restauratsioonimaterjalide väljaarendamisel ja nendega töötamisel.

Ainulaadse ja uuendusliku tootmisviisiga valmistatud KATANA™ AVENCIA™ Block võimaldab hambaarstil saavutada esmaklassilise kauapüsiva poleerimistulemuse ja eriti hea kulumiskindluse, ilma et oleks vaja paagutamist. Seetõttu saavutab hambaarst igas mõttes suurepärase tulemuse – kiiremini ja vähema pingutusega kui kunagi varem.

Uue KATANA™ AVENCIA™ Blocki südameks on tihedaks plokiks kokku surutud nanosuuruses täitematerjalid. Seejärel immutatakse plokki enne kuumuse käes polümeriseerimist ühtlaselt vaikmonomeeriga. Selle tulemusena saadakse täiesti uut tüüpi hübriidkeraamika, mille tugevus talub hammustamise survet ning mille läige püsib tunduvalt paremini.

Ajakirjanike ja klientide päringuteks:
Kuraray Europe Benelux B.V., Nordics & Baltics
infobaltics@kuraray.com / kuraraynoritake.eu/ee/katana-avencia-block

Kuraray Noritake Dental Inc on 2012. aasta aprillis Kuraray Medical Inc ja Noritake Dental Supply Co ühinemise tulemusena moodustatud ettevõte. Nende kahe rahvusvahelise ettevõtte ühendatud jõule tuginedes võtab Kuraray Noritake Dental eesmärgiks luua tootearenduse, tootmise ja müügi alal maailmas juhtpositsiooni saavutavat sünergiat.

Ettevõte kasutab oma erakordseid orgaanilise ja anorgaanilise keemia alaseid eriteadmisi, mille põhjal töötatakse välja edasisi kõrgtasemel hambaravitooteid – keraamikast kuni komposiit- ja isegi bioloogiliste materjalideni.

Kuraray Noritake Dental peab kõige tähtsamaks patsiendi naeratust. Seetõttu on ettevõte alati püüdnud tuua hambaravisse inspireerivaid uuendusi ning luua nii praegu kui ka tulevikus minimaalselt invasiivseid ja biolisanditega lahendusi, et patsientidel jääksid oma hambad kogu eluks alles.