A strong and durable bond between the tooth and the restoration is a decisive factor influencing the long-term performance of dental restorations. The quality of the bond, however, is not only affected by the bonding agent or cementation solution used, but also by the condition of the bonding surface. For those who would like to ensure clean tooth and restoration surfaces in an easy way, Kuraray Noritake Dental has developed KATANA™ Cleaner, a universal cleaner with MDP salt and a pH of 4.5 for intra- and extra-oral application.

It has been proven that proteins present in saliva and blood have a negative effect on the performance of dental adhesives. Especially in indirect procedures, however, it is impossible to keep the bonding surfaces free of oral fluids. At try-in at the latest, the prepared tooth and the restoration are contaminated and need to be cleaned. Rinsing with water does not have the desired effect, and even with many available cleaners, a certain amount of proteins are usually left on the surface. Tests show that by using KATANA™ Cleaner or by sandblasting, the desired high cleaning effect needed is obtained, without compromising bond strength. This is true for KATANA™ Zirconia restorations, while KATANA™ Cleaner also leads to the desired results on dentin and enamel – surfaces in the oral cavity for which sandblasting and most of the other cleaners are not indicated.

The use of KATANA™ Cleaner offers yet another advantage: the cleaning procedure is extraordinarily simple, quick and neat. The universal cleaner comes in a bottle with an innovative flip-top cap, enabling single-handed dispensing onto the dish. It is then rubbed into the surface of the restoration and the prepared tooth structure or the abutment for ten seconds, rinsed with water and dried. Thanks to the high surface activity of MDP salt, these ten seconds are sufficient to remove the proteins on the substrate almost completely, creating conditions very similar to those found on a non-contaminated bonding surface. Subsequently, the selected bonding agent or cementation solution – e.g. PANAVIA™ V5 or PANAVIA™ SA Cement Universal – is applied according to the maufacturer’s usage instructions.

The result is a strong long-lasting bond, which gives users a peace of mind. Pilot users who have already tested the product agree that KATANA™ Cleaner is the easy way to optimise bond quality and streamline any adhesive procedure.

As co-editor-in-chief of the Journal of Adhesive Dentistry, Prof. Bart Van Meerbeek is one of the most respected authorities on the topic of dental bonding agents. Here, he discusses how they have advanced over the last three decades and what the future of adhesive dentistry might look like.

Prof. Van Meerbeek, how have bonding agents changed and advanced since you first began studying them?

I believe that the great progress dental adhesive technology has undergone in the last 30 years, and the progress in bonding agents in particular, has had a great impact on the field of dentistry and particularly on restorative dentistry, of course. Many of the current restorative dental procedures make use of adhesive materials and techniques and have advanced greatly compared with when I wrote my dissertation more than two decades ago on the topic of adhesion to dentine. Adhesion to enamel is, of course, relatively easy to achieve in comparison with adhesion to dentine, and when I first started researching this topic, I was limited to conducting clinical trials in which we were confronted with a relatively high number of restoration losses in the short term. I was lucky to have been able to witness first-hand the fast advancements dental bonding has made, having conducted research in this field now for nearly 30 years.

At a certain point, the research community started to realise that there is a smear layer in-between, which is created through cavity preparation, and that this layer interferes with bonding. If you want to achieve successful micromechanical and chemical bonding to the substrate, you first need to do something with this smear layer.

After this, we entered the era of conditioners and primers. In the past, the restorative community had been a little bit afraid of using phosphoric acid owing to its potential for pulp irritation. More and more, however, dental professionals began to use etchants with this chemical in them, as well as primers that effectively promoted bonding between the adhesive resin and dentine. While having achieved excellent bonding performance with multistep adhesives in the laboratory, as was later confirmed in clinical studies, further design and development of adhesive materials next focused on simplification and shortening of bonding procedures.

Out of this, two kinds of adhesives, making use essentially of two different bonding modes, arose: the etch-and-rinse adhesives and the self-etch, or etch-and-dry, adhesives. The newest generation of universal adhesives now enables dental practitioners to choose which of the two bonding modes to apply with one single adhesive formulation.

What advantages do bonded restorations offer over more traditional methods?

Bonded restorations are minimally invasive—the dentist doesn’t have to remove non-diseased tissue to create undercuts to keep the restoration in place, allowing for a more conservative approach. Keeping as much enamel as possible should be a goal of any restorative procedure, as it is simply the best tissue to bond to. Although bonding to dentine has always remained more challenging and has actually slowed down our adhesive endeavours for a long time, adhesively restoring teeth, involving also effective bonding to dentine, can today be achieved in a reliable, predictable and durable way.

Along with highly successful implantology to replace missing teeth, lessening the need for bridges, solitary tooth restorations have substantially increased in number. Bonding promoted the additional shift from conventional tissue-invasive crowns to tissue-preserving partial tooth restorations, as modern adhesives can hold such partial restorations in place on rather flat and even non-retentive surfaces. In addition, bonding procedures allow for more natural-appearing restorations to be achieved by techniques to adhesively lute aesthetic restorations made of glass-ceramics and even the strong zirconia ceramics that no longer can be considered non-bondable.

What is your opinion regarding the current generation of universal adhesive solutions?

I think that this generation is very good, but that they are still not always as good as the more traditional gold standard two-step self-etch and three-step etch-and-rinse adhesives when it comes to their intrinsic bonding potential to dental tissue. However, I do see it as a positive that many of these universal adhesives integrate the MDP monomer, which should be considered to be one of the best functional monomers available today, though it needs to be present at a high concentration and purity level.

The MDP monomer is, generally speaking, excellent at bonding to zirconia as well. When it comes to bonding to different kinds of ceramic as well as resin-based composite restorative materials, it is always helpful to know which universal adhesives contain silane and are claimed to no longer need further treatment of the restoration. This has the advantages of lower technique sensitivity and fewer procedural steps—provided that it does, of course, work. There is current scientific evidence that the silane incorporated in today’s acidic aqueous universal adhesives is, however, insufficiently stable. Fortunately, research is underway to develop new universal adhesives that contain other silanes with higher stability in water at higher acidity.

Overall, I believe that a restoration primer that contains a high concentration of silane along with the MDP monomer is still more effective than many universal adhesives for bonding to restorative materials, since these universal adhesives can contain many other ingredients that create a kind of competition within the material to reach and interact with the substrate surface, leading to lesser bonds.

Another shortcoming of universal adhesives is their thin film thickness and relatively high hydrophilicity, promoting water uptake and hence making them sensitive to hydrolytic degradation. In this light, it’s important to note that, when a viscous and hydrophobic flowable composite is applied on top of a universal adhesive, it can make up for this somewhat and allow for durable bonding to take place.

Is the MDP monomer crucial to the ultimate success of universal adhesives? Are there other factors that can influence this?

Well, it’s very clear that the MDP monomer is one of the most effective monomers available, given its primary chemical binding potential to hydroxyapatite. However, there are significant differences in the MDP monomer purity and concentration levels between these products, factors that are affected by whether or not the monomer is synthesised by the company itself or whether this process is outsourced. Essentially, a universal adhesive that contains a high concentration of very pure MDP monomer should perform the best.

Are there any specific advantages that a self-etch adhesive possesses?

The biggest advantage is that it doesn’t remove all hydroxyapatite and minerals present in dentine and so keeps the weaker dentinal collagen protected. Phosphoric-acid etching results in relatively deep and complete demineralisation with collagen exposure, making the bond more prone to degradation. Partially maintaining minerals around collagen using a mild self-etch adhesive additionally allows for strong ionic bond formation to take place when the adhesive in particular contains the functional monomer MDP. In addition, one should be aware that, while chemical binding doesn’t necessarily lead to higher bond strength, it can create better long-term bond durability.

What do you see as the next step in adhesive dentistry?

One possibility is to reduce the number of steps in the adhesion process with the final goal of having self-adhering restorative materials. There have been developments in this direction, including studies and commercial products, though the products haven’t always proved to be very effective and their bond durability is unclear. Now, however, there are newer materials coming to market with claims that they can be used with no pretreatment. Their clinical effectiveness, nevertheless, still needs to be proved and guaranteed before such self-adhering restorative materials could be used as true amalgam alternatives in routine dental practice.

Another possibility, and current R & D hype, is the development of bioactive adhesives. Many dental researchers and many companies want adhesives not only to deliver good bonding performance but also to have certain therapeutic benefits. What exactly a bioactive adhesive is depends on who you’re talking to. Some researchers believe that they should have antibacterial qualities, whereas others state that remineralisation of dentine and pulpal cell interaction are needed to qualify for the term “bioactive”. We certainly need to investigate whether we can give these materials these additional properties, but on one condition: that the adhesive material does not lose any of its original bonding abilities. That, in my opinion, is the biggest challenge for the future of adhesive dentistry.

By Japanese Dr. Shigeru Adachi, Cusp Dental Supply Co. Ltd

Initial situation

Checking of the shade (Posterior Crowns: FC Paste Stain, Anterior Crowns: Micro layered CERABIEN™ ZR)

Checking the restoration on the model

Final situation

Ceramist:

MDT Shigeru Adachi, Cusp Dental Supply Co. Ltd

MDT Adachi is a promising ceramist of the new generation, who has been working for Cusp Dental Supply Co. Ltd. since 2013. He received the Award of Excellence 2018 at QDT TECHNICAL CONTEST.

April, 2013 - Present
Working for Cusp Dental Supply Co., Ltd.
March, 2013
Graduated from the Osaka Ceramic Training Center
April, 2009 - March, 2011
Worked for Tsuruga Denatal Laboratory
March, 2009
Graduated from the Aishi Dental Technician College

MDT SHIGERU ADACHI USED KATANA™ ZIRCONIA HTML AND CZR FC PASTE STAIN FOR HIS CASE STUDY

By Irfan Abas
Dental implantologist & restorative dentist

Irfan Abas is a specialist in the field of oral implantology & restorative dentistry and an international speaker on the subject. He has given more than 20 presentations, workshops and live surgery courses throughout the world. TP - a dutch dental magazine, of which he is also editor, has published multiple articles under his name. Another highlight is a publication in the NTvT, in collaboration with Prof. Gert Meijer (Radboud UMC), under whose supervision Abas successfully completed the four-year postdoctoral training Reconstructive Dentistry in 2014. He is also an instructor and lecturer for the AAIE and chair of MINEC Netherlands. Irfan Abas has his own practice in Bussum, the Netherlands (tandartsabas.nl).

A healthy 42 year-old male patient requested reconstruction of his central incisors, which were badly worn.

Pre-Treatment

After producing the mock-up, grooves were prepared through the mock-up.

To fit two lithium disilicate veneers, a preparation of 1 mm was required. After removing the mock-up, the preparation was perfected.

Checking the space using a silicone mold.

Definitive preparation (frontal)

Temporary veneers made from temporary resin based material (Protemp)

Spot-etching before bonding the temporary veneers in place.

A small amount of flowable composite applied to the etched surfaces.

Light curing the entire surface of the temporary veneers.

Finished temporary veneers.

The veneers constructed by the dental technician.

Checking the fit of the veneers

Rubber dam fitted to enable controlled adhesive cementation.

Etching with 35% phosphoric acid K-Etchant Syringe for 10 seconds.

Treatment with selfetching primer PANAVIA™ V5 Tooth Primer (left on for 20 sec.)

Etching of the lithium disilicate veneers with hydrogen fluoride.

Clearfil Ceramic Primer Plus MDP-silane primer applied to the veneers.

Veneers secured to a placement instrument before definitive cementation

PANAVIA V5 Paste applied to the inner surface of the veneer.

PANAVIA V5 Paste spread over the veneer.

Veneer fitted and excess removed.

Light curing (minimum 10 sec.).

Immediately after the adhesive cementation with PANAVIA V5.

Immediately post-op.

Immediately post-op.

Two months post-op.

One year post-op.

One year post-op.

As the operator of his own dental practice in the German town of Laer and a member of the Digital Dental Academy in Berlin, Dr Hendrik Zellerhoff is clearly a very busy man. Fortunately, his integration of Kuraray Noritake Dental’s KATANA Zirconia Block into his daily workflow means that he is able to deliver high-quality restorations to his patients faster than ever. In this interview, Dr Zellerhoff explains how he uses the block and how his patients have responded to it.

Dr Zellerhoff, can you tell us a little bit about your background as a dentist?
In 2003, I began working as an assistant and at this time I worked with the CEREC system, a system for which I am now a certified trainer. In 2005, I opened my own dental practice in Laer, which I continue to operate to this day.

When did you first begin to work with Kuraray Noritake Dental’s range of products?
I think it was about four or five years ago that the laboratory that I worked with told me how good Kuraray Noritake’s KATANA Zirconia discs were for sintering and fabricating full-zirconia crowns. At that point, however, I was only looking for materials that would work with CEREC, and so it wasn’t until early 2018, when I went on a course in Leipzig in Germany where the KATANA Zirconia Block was being demonstrated, that I really saw how I could use this product in my practice. The block’s integration with the CEREC system means that it is now possible for me to provide high-strength aesthetic zirconia restorations for my patients accurately and quickly.

How frequently do you use the KATANA Zirconia Block during your daily work as a dentist?
I think around once a day, on average. It varies—sometimes I may make restorations for three different patients on one day, and then it’s four days until I use it again. My CEREC is only able to conduct wet milling, however, which is obviously slower than the 15-minute time span made possible through dry milling, and this limits how often I can use it.

What do you like most about this zirconia solution?
For me, it both feels and looks very real, so it has this aesthetic function going for it. Its multilayered, highly translucent appearance definitely helps to achieve more natural-looking restorations. However, the mechanical strength of the material is also something that I like, as it means that it can be used for restorations with thinner walls and sharper margins than those made with glass-ceramics.

With the release of the KATANA Zirconia Bridge Block, do you expect to use this zirconia solution more?
Oh, absolutely! The ability to make aesthetic bridges in the molar area and in a single visit is a revelation to me.

What has the response from your patients been?
They love it! These procedures can be realised on the same day as their initial appointment, and this means that my practice has patients coming from far outside of the small town in which I live. We even get people coming all the way from Switzerland to receive KATANA-based treatments—that’s how positive the response has been.

With this focus on digital dentistry, is there still a role for the dentist as a craftsperson?
I love to work with an entirely digital workflow. If a machine can do something better or faster than I am able to, then that is all right with me. As far as I can see, the future of dentistry will be digital. At the end of the day, the goal stays the same—to provide my patients with results that they are happy with.

With over 30 years of experience as a dentist and researcher, Dr Paolo Baldissara of the University of Bologna in Italy could be forgiven for slowing down a bit. This is far from happening, however, as he continues to be at the forefront of ceramic restoration material developments and their integration into CAD/CAM workflows.

When presenting at a symposium held in Berlin in Germany by Kuraray Europe earlier this year, Dr Baldissara highlighted how the company’s patented multilayered zirconia technology allows the KATANA™ Zirconia Block to effectively mimic the shade gradation of natural teeth. He commenced his presentation by outlining the general shift towards metal-free restorations, which in his opinion has been driven by a number of factors, the high value now placed on aesthetics in dentistry chief among them.

“I began using zirconia back in 2005 for prosthodontics in my department at Bologna, and it has greatly improved in quality since then,” said Dr Baldissara. “Generally speaking, the shift towards zirconia only started when a high-strength substitute for metal that was able to be processed with CAD/CAM systems with high accuracy became available.”

It was at the 2015 International Dental Show in Cologne in Germany where Dr Baldissara was first introduced to KATANA™ Zirconia UTML and STML, both of which impressed him with their high levels of translucency. “I started to use them almost immediately, mainly in their monolithic form, for research and in clinical practice,” he said. “My opinion of them was very high, as they allowed me to make cost-effective single crowns and multi-unit restorations with excellent aesthetic properties with scattered and diffused light. This is, ultimately, what patients want.”

Dr Baldissara began using the KATANA™ Zirconia Block in 2018 and expressed his excitement with how its high-speed sintering allows for fast processing of restorations. He recommended dry milling for a number of reasons: not only does it allow for the translucency of the zirconia to be maintained, it also helps to avoid contamination from other ceramic powders that may persist in the milling unit. In addition, he encouraged attendees to frequently replace the burs of their milling units for optimal results and reduced risk of chipping.

“Dry milling and high-speed sintering of the KATANA™ Zirconia Block is an extremely promising technology,” said Dr Baldissara. “In my opinion, it is the correct way to make aesthetic and mechanically strong restorations for the patient.”

Steve Meeze definitely has it: a passion for dentistry. Yet, there was a time when he was unhappy in his job as a dental practitioner. Fundamental changes were necessary to lay the foundations for finding personal fulfillment in his work. We spoke to him about his motivation to do things differently and about the path he has chosen and is following down to the present day.

Many students of dentistry would like to run their own dental office one day. For you, this dream came true, but you ultimately decided to take a different path. Why did this change seem necessary?

After graduation in 1983, running my own dental office seemed to be a great plan: I wanted to be independent, grow my patient base, and become successful, which went very smoothly in the beginning. This economic success, however, did not protect me against starting to feel unhappy and burned-out after several years. Once I began to take my negative emotions seriously and to search for the underlying causes, I realized that is was not merely the workload that troubled me. The truth was that I was missing a sense of purpose in many of my daily tasks. This seemed to be the reason for my lack of energy and motivation to proceed with what I had started. Luckily, I was able to find my personal “why” after some time.

Where did you find your own fulfillment or sense of purpose?

I ultimately found it in the field of conservative dentistry. The reason is that direct restorative treatments with composite allow me to do amazing things in a non-invasive or minimally invasive way. Doing no harm and always being able to go back simply feels good, and my patients are incredibly grateful for what I do. Their gratitude is my reward. This is why I decided to dedicate myself exclusively to treating patients with composite.

How do you do this?

In 2009, I sold my own dental office and started working in different practices in Flanders. In this process, I established some highly valuable partnerships with colleagues, who appreciate my skills and refer their patients to me mainly in the course of interdisciplinary treatment. These orthodontists or surgeons need someone who puts the finishing touches to their work. And this is exactly what I do: I create a beautiful smile at the end of an often complex treatment. Other patients approach me on their own accord with fractured or misshaped teeth and the desire for esthetic improvement. In any case, I listen to them carefully before I start planning. Knowing what is on their minds, I can treat them with confidence. The most precious moment for me is when I hand over the mirror and let them evaluate my work. Their positive reaction, the glint in their eyes is what motivates me every day.

Is there a specific technique you use in your daily work?

Yes, I use the Light Facing Concept I developed to solve esthetic issues in the anterior region. This technique focuses of creating a harmony without the need to sacrifice large amounts of healthy tooth structure. With this concept, a fractured anterior tooth, for example, is restored in three steps: Initially, a single dentin shade of composite of the same color as the fractured tooth is used to create the desired tooth shape and make the fracture line disappear. In this step, shade selection is independent of the final color I would like to reach. Subsequently, I correct the color with an opaque material and try to match the shade of the adjacent teeth as exactly as possible. If necessary, I create mamelons and other individual characteristics in this layer. The final step is carried out on all anterior teeth whenever the appearance of the treated tooth differs from the others: A light facing – i.e. a very thin layer of more or less translucent composite – is added to mask the differences. In cases with minimal shade differences, a composite with a high translucency is used, while a more opaque material is preferable whenever the differences are more apparent.

What is your preferred material for the Light Facing Concept?

My personal experience shows that the best results are obtained with CLEARFIL MAJESTY ES-2 Premium composite from Kuraray Noritake. It simply offers the best mimetic (chameleon) effect of all composite materials I have tested so far, and I have tested many of them. The material tends to blend in with the surrounding tooth structure, and only four shade combinations are usually sufficient to cover the whole range of my patients’ tooth shades. I love this virtually magical effect!

What is your personal conclusion?

When I made the decision to start doing what really makes me happy, I could not be sure that I had chosen the right path. Retrospectively, I know that giving up my present career and taking steps towards personal fulfillment has been exactly the right thing to do. I love the fact that I can satisfy my patients’ desires without sacrificing healthy tissue, and my Light Facing Concept implemented with MAJESTY ES-2 make it easy for me to obtain the results they have been dreaming of.

CASE EXAMPLES

Fig. 1 : Case example: Color change with composite – initial clinical situation.

Fig. 2.: Case example: Color change with composite – treatment outcome.

Fig. 3: Case example: Shape correction with composite – initial clinical situation.

Fig. 4:  Case example: Shape correction with composite – immediate treatment outcome.

Combining ease of use and excellent viscosity, CLEARFIL™ CERAMIC PRIMER PLUS is a stable and universal prosthetic primer designed for all restorations. By incorporating Kuraray Noritake Dental’s original MDP monomer and a silane monomer, it is able to provide an enhanced adhesive surface for ceramics, hybrid ceramics, composites and even metals. CLEARFIL™ CERAMIC PRIMER PLUS is best used in conjunction with the adhesive resin cement PANAVIA™ V5 to ensure durable restorations.

The key to CLEARFIL™ CERAMIC PRIMER PLUS’s performance is in the monomers it possesses. The MDP monomer strongly bonds to metals and zirconia, while the silane coupling agent MPS efficiently adheres to composites and all silica-based ceramics. “What makes CLEARFIL™ CERAMIC PRIMER PLUS different to other primers is its stability,” says Peter Schouten, Technical Manager at Kuraray Noritake Benelux. “Normally, activated silanes are very unstable. However, the well-balanced formula of CLEARFIL™ CERAMIC PRIMER PLUS provides it with a shelf life of three years after production, making it easy and predictable to use.”

Procedural simplicity

Every element of CLEARFIL™ CERAMIC PRIMER PLUS is designed to deliver maximal procedural simplicity. It is packaged in an easy-to-squeeze bottle that dispenses the solution easily and accurately. Whereas other similar products need to be left in place for one minute or more, this primer is immediately effective upon application. “CLEARFIL™ CERAMIC PRIMER PLUS benefits the dentists by offering a reliable primer for all materials, without being difficult to apply or use,” says Schouten. “From titanium to zirconia, from lithium disilicate to composite—simply apply and dry, and you're done.”

PANAVIA™ V5

A resin cement with unrivalled procedural simplicity and predictability, PANAVIA™ V5 is a member of Kuraray Noritake Dental’s PANAVIA family. It sets a new standard for adhesion, allowing for self-cure dentine bond strengths equal to our gold-standard light-cure bonding agent, CLEARFIL SE BOND. PANAVIA™ V5 offers natural aesthetic stability in shading through its amine-free paste, which is available in five shades and has been scientifically proven to demonstrate a lower level of post-curing colour variance than amine-based cements.

CLEARFIL™ CERAMIC PRIMER PLUS and PANAVIA™ V5

Providing strong bonding to not just hydroxyapatite, but to metals and zirconia as well, PANAVIA™ V5 is designed for use in conjunction with CLEARFIL™ CERAMIC PRIMER PLUS. The cementation procedure is efficient and effective: use PANAVIA V5 Tooth Primer for the pretreatment of the tooth, CLEARFIL™ CERAMIC PRIMER PLUS for the priming of the restoration, and PANAVIA™ V5 for the cementation.

NOW 18 Minutes Sintering using the CEREC SpeedFire

KATANA™ Zirconia Block, the innovative multi-layered zirconia block^*1, can be used with Dentsply Sirona's CEREC system^*2. Now the 18 minutes sintering program^*3 is developed and installed into CEREC SpeedFire. New sintering technology makes it possible to fabricate full zirconia restoration in approx. 35 minutes.

An ideal composite material should satisfy three basic requirements: function, aesthetics and biocompatibility. A member of the CLEARFIL MAJESTY family, Kuraray Noritake Dental’s CLEARFIL MAJESTY™ ES Flow combines excellent handling, polishability and mechanical strength to provide a solution for all cavity classes. This universal flowable composite employs silane and filler technologies to maximise both its procedural and aesthetic outcomes, allowing dentists to create long-lasting restorations with reduced chairside time.

A new standard for flowable composites

Traditionally, a composite’s flowability has been inversely related to its filler content. When flowable composites were first introduced in the mid-1990s, their lower viscosity was enabled by a filler level much lower than that of conventional composites. This, however, meant that these flowables fared poorly in a clinical setting, demonstrating inferior mechanical properties when compared to traditional hybrid composites.

With CLEARFIL MAJESTY™ ES Flow, dentists can now use a flowable composite with mechanical properties comparable to those of conventional alternatives. Thanks to Kuraray Noritake Dental’s silane technology, millions of submicron filler particles fit into the composite, reliably adhering to the resin and maintaining long-term stability. CLEARFIL MAJESTY™ ES Flow possesses a scientifically tested flexural strength of over 150 MPa, similar to that of a universal nano hybrid composite, making it suitable for use in Class I and II restorations.

Aesthetic restorations

However, the small, durable particles of CLEARFIL MAJESTY™ ES Flow provide more than just mechanical reliability. Special cluster fillers provide a light diffusion effect that is similar to that of natural teeth, meaning that the material blends effortlessly with the existing tooth structure. Unlike other flowables, CLEARFIL MAJESTY™ ES Flow is glossy immediately after curing. This gloss can be improved with remarkable simplicity—simply wipe the cured resin with an ethanol-moistened gauze or cotton roll to produce a smooth surface that is proven to maintain its gloss over time.

Ideal handling

CLEARFIL MAJESTY™ ES Flow’s low viscosity monomers ensure that it has excellent handling characteristics, promising better sculpting for the dentist. The flowable composite does not stick to the needle tip or to any instruments, only adhering to the area to which it is applied, while the proprietary design of the syringe itself minimises air bubbles when dispensing. Once dispensed, the paste possesses great consistency with its non-slumping formula, ensuring that it can maintain its shape. A truly universal composite, CLEARFIL MAJESTY™ ES Flow allows dentists to create highly aesthetic restorations with ease.

Obtain results in four simple steps

Creating aesthetic and durable restorations has never been more achievable. Simply prepare the cavity and apply bonding, dispense and sculpt the CLEARFIL MAJESTY™ ES Flow, light-cure and, finally, polish. It’s as easy as that.

At Kuraray Noritake Dental Inc. we are proud that our products are being developed using innovative technologies, paying attention to detail and keeping in mind the needs of our customers.

We are committed to offering outstanding products that provide dental professionals with the flexibility for self-expression and creativity, adding value and delivering superb aesthetic results to each and every procedure.

Usability, simplicity and, of course, quality always in mind - providing dental professionals with materials that will make their daily practice stress free.

As a prove that our products meet the needs of dentists and lab technicians alike, we are happy to share with you the EC Certificates of Full Quality Assurance System that we have received from The Notified Body.  Those can be downloaded below.

Chairside products

Labside products